Search   
MSDS 
:
 P-(2,4-Dinitroanilino)phenol Moist Solid Containing 30% Water
CAS 
:
 119-15-3
SYNONYMS 
:
 2,4-Dinitro-P-Hydroxydiphenylamine.
**** SECTION 2 - COMPOSITION, INFORMATION ON INGREDIENTS ****

+----------------+--------------------------------------+----------+-----------+
| CAS# | Chemical Name | % | EINECS# |
|----------------|--------------------------------------|----------|-----------|
| 119-15-3 |Phenol, 4-(2,4-dinitrophenyl)amino- | ca 100 | 204-300-4 |
+----------------+--------------------------------------+----------+-----------+
Hazard Symbols: None Listed.
Risk Phrases: 10

**** SECTION 3 - HAZARDS IDENTIFICATION ****

EMERGENCY OVERVIEW
Flammable.

Potential Health Effects
Eye:
May cause lacrimation (tearing), blurred vision, and photophobia.
May cause chemical conjunctivitis and corneal damage.
Skin:
May cause skin irritation and possible burns.
Ingestion:
Methemoglobinemia is characterized by dizziness, drowsiness,
headache, shortness of breath, cyanosis (bluish discoloration of skin
due to deficient oxygenation of the blood), rapid heart rate and
chocolate-brown colored blood. Overexposure may cause
methemoglobinemia. May cause nausea, vomiting, abdominal pain, and
increased salivation.
Inhalation:
May cause respiratory tract irritation. Methemoglobinemia is
characterized by dizziness, drowsiness, headache, shortness of
breath, cyanosis (bluish discoloration of skin due to deficient
oxygenation of the blood), rapid heart rate and chocolate-brown
blood. Olfactory fatigue may occur. Can produce delayed pulmonary
edema. Inhalation of aniline causes anoxia due to the formation of
methemoglobin.
Chronic:
May cause methemoglobinemia, which is characterized by
chocolate-brown colored blood, headache, weakness, dizziness, breath
shortness, cyanosis (bluish skin due to deficient oxygenation of
blood), rapid heart rate, unconsciousness and possible death.

**** SECTION 4 - FIRST AID MEASURES ****

Eyes:
Flush eyes with plenty of water for at least 15 minutes,
occasionally lifting the upper and lower eyelids. Get medical aid.
Skin:
Get medical aid. Flush skin with plenty of water for at least 15
minutes while removing contaminated clothing and shoes. Wash clothing
before reuse.
Ingestion:
Never give anything by mouth to an unconscious person. Get medical
aid. Do NOT induce vomiting. If conscious and alert, rinse mouth and
drink 2-4 cupfuls of milk or water.
Inhalation:
Remove from exposure and move to fresh air immediately. If not
breathing, give artificial respiration. If breathing is difficult,
give oxygen. Get medical aid. Do NOT use mouth-to-mouth
resuscitation.
Notes to Physician:
For methemoglobinemia, administer oxygen alone or with Methylene
Blue depending on the methemoglobin concentration in the blood.
Antidote:
Methylene blue, alone or in combination with oxygen is indicated as
a treatment in nitrite induced methemoglobinemia.

**** SECTION 5 - FIRE FIGHTING MEASURES ****

General Information:
As in any fire, wear a self-contained breathing apparatus in
pressure-demand, MSHA/NIOSH (approved or equivalent), and full
protective gear. During a fire, irritating and highly toxic gases
may be generated by thermal decomposition or combustion. Dust can be
an explosion hazard when exposed to heat or flame. Flammable solid.
May burn rapidly with flare burning effect. May re-ignite after fire
is extinguished.
Extinguishing Media:
For large fires, use water spray, fog or regular foam. Contact
professional fire-fighters immediately. For small fires, use dry
chemical, carbon dioxide, sand, earth, water spray or regular foam.
Cool containers with flooding quantities of water until well after
fire is out.

**** SECTION 6 - ACCIDENTAL RELEASE MEASURES ****

General Information: Use proper personal protective equipment as indicated
in Section 8.
Spills/Leaks:
Vacuum or sweep up material and place into a suitable disposal
container. Avoid runoff into storm sewers and ditches which lead to
waterways. Clean up spills immediately, observing precautions in the
Protective Equipment section. Scoop up with a nonsparking tool, then
place into a suitable container for disposal. Avoid generating dusty
conditions. Remove all sources of ignition. Provide ventilation.

**** SECTION 7 - HANDLING and STORAGE ****

Handling:
Wash thoroughly after handling. Remove contaminated clothing and
wash before reuse. Use with adequate ventilation. Minimize dust
generation and accumulation. Avoid contact with eyes, skin, and
clothing. Empty containers retain product residue, (liquid and/or
vapor), and can be dangerous. Keep container tightly closed. Keep
away from heat, sparks and flame. Avoid ingestion and inhalation. Do
not pressurize, cut, weld, braze, solder, drill, grind, or expose
empty containers to heat, sparks or open flames.
Storage:
Keep away from heat, sparks, and flame. Keep away from sources of
ignition. Store in a tightly closed container. Store in a cool, dry,
well-ventilated area away from incompatible substances.
Flammables-area.

**** SECTION 8 - EXPOSURE CONTROLS, PERSONAL PROTECTION ****

Engineering Controls:
Facilities storing or utilizing this material should be equipped
with an eyewash facility and a safety shower. Use adequate general or
local explosion-proof ventilation to keep airborne levels to
acceptable levels.
Exposure Limits
CAS# 119-15-3:


Personal Protective Equipment

Eyes:
Wear appropriate protective eyeglasses or chemical
safety goggles as described by OSHA's eye and face
protection regulations in 29 CFR 1910.133 or European
Standard EN166.
Skin:
Wear appropriate protective gloves to prevent skin
exposure.
Clothing:
Wear appropriate protective clothing to prevent skin
exposure.
Respirators:
A respiratory protection program that meets OSHA's 29
CFR 1910.134 and ANSI Z88.2 requirements or European
Standard EN 149 must be followed whenever workplace
conditions warrant respirator use.

**** SECTION 9 - PHYSICAL AND CHEMICAL PROPERTIES ****

Physical State: Solid
Color: dark brown
Odor: none reported
pH: Not available.
Vapor Pressure: Not available.
Viscosity: Not available.
Boiling Point: Not available.
Freezing/Melting Point: 191 deg C
Autoignition Temperature: Not applicable.
Flash Point: Not applicable.
Explosion Limits, lower: Not available.
Explosion Limits, upper: Not available.
Decomposition Temperature:
Solubility in water:
Specific Gravity/Density:
Molecular Formula: C12H9N3O5
Molecular Weight: 275.21

**** SECTION 10 - STABILITY AND REACTIVITY ****

Chemical Stability:
Stable under normal temperatures and pressures.
Conditions to Avoid:
Incompatible materials, ignition sources, dust generation, excess
heat, strong oxidants.
Incompatibilities with Other Materials:
Strong oxidizing agents.
Hazardous Decomposition Products:
Nitrogen oxides, carbon monoxide, irritating and toxic fumes and
gases, carbon dioxide.
Hazardous Polymerization: Has not been reported

**** SECTION 11 - TOXICOLOGICAL INFORMATION ****

RTECS#:
CAS# 119-15-3: SL3070000
LD50/LC50:
CAS# 119-15-3: Oral, mouse: LD50 = 6550 mg/kg; Oral, rat: LD50 =
15610 mg/kg.
Carcinogenicity:
Phenol, 4-(2,4-dinitrophenyl)amino- -
Not listed by ACGIH, IARC, or NTP.
Other:
See actual entry in RTECS for complete information.

**** SECTION 12 - ECOLOGICAL INFORMATION ****



**** SECTION 13 - DISPOSAL CONSIDERATIONS ****

Dispose of in a manner consistent with federal, state, and local regulations.

**** SECTION 14 - TRANSPORT INFORMATION ****

IATA
Shipping Name: FLAMMABLE SOLID, ORGANIC, N.O.S.*
Hazard Class: 4.1
UN Number: 1325
Packing Group: II
IMO
Shipping Name: FLAMMABLE SOLID, ORGANIC, N.O.S.
Hazard Class: 4.1
UN Number: 1325
Packing Group: II
RID/ADR
Shipping Name: FLAMMABLE SOLID, ORGANIC, N.O.S.
Hazard Class: 4.1
UN Number: 1325
Packing group: II

**** SECTION 15 - REGULATORY INFORMATION ****

European/International Regulations
European Labeling in Accordance with EC Directives
Hazard Symbols: Not available.
Risk Phrases:
R 10 Flammable.
Safety Phrases:
S 16 Keep away from sources of ignition - No
smoking.
S 28A After contact with skin, wash immediately with
plenty of water.
S 37 Wear suitable gloves.
S 45 In case of accident or if you feel unwell, seek
medical advice immediately (show the label where
possible).
WGK (Water Danger/Protection)
CAS# 119-15-3: No information available.
Canada
CAS# 119-15-3 is listed on Canada's DSL List.
CAS# 119-15-3 is not listed on Canada's Ingredient Disclosure List.
US FEDERAL
TSCA
CAS# 119-15-3 is listed on the TSCA inventory.

**** SECTION 16 - ADDITIONAL INFORMATION ****

MSDS Creation Date: 9/02/1997 Revision #6 Date: 3/18/2003

The information above is believed to be accurate and represents the best
information currently available to us. However, we make no warranty of
merchantability or any other warranty, express or implied, with respect to
such information, and we assume no liability resulting from its use. Users
should make their own investigations to determine the suitability of the
information for their particular purposes. In no way shall the company be
liable for any claims, losses, or damages of any third party or for lost
profits or any special, indirect, incidental, consequential or exemplary
damages, howsoever arising, even if the company has been advised of
the possibility of such damages.
--------------------------------------------------------------------------------
--------------------------------------------------------------------------------
Search More   
ALL MSDS PAGES IN THIS GROUP
NAMECAS
1-Phenyl-4,5-Dichloro-6-Pyridazone, 99+% 1698-53-9
N,N-Dimethyl-P-Phenylenediamine Dihydrochloride 99% 536-46-9
1-Adamantanecarboxylic Acid, 99% 828-51-3
Dl-2-(M-Chlorophenoxy)Propionic Acid, 98% 101-10-0
Mercaptoacetic acid, sodium salt, 98% 367-51-1
Heptanophenone, 98+% 1671-75-6
Cyclobutanone, 98+% 1191-95-3
m-Tolualdehyde, 98%, stabilized with 0.1% Hydroquinone 620-23-5
D(+)-raffinose pentahydrate, 99+% 17629-30-0
Cyclohexanone 2,4-Dinitrophenylhydrazone, 99+% 1589-62-4
DL-Aspartic Acid 617-45-8
Diallyldisulfide, 70%, Remainder Mainly Diallyl Sulfide 2179-57-9
DL-2-Aminoadipic Acid Hydrate 542-32-5
3,3'-Diethylthiatricarbocyanine Iodide, Laser Grade 3071-70-3
Hexadecanedioic acid, 97% 505-54-4
Sodium tri-sec-butylborohydride, 1M solution in tetrahydrofuran 109-99-9
L-Phenylalanine Methyl Ester Hydrochloride, 98% 7524-50-7
3,3',4',5-Tetrachlorosalicylanilide, 99% (UV-Vis) 1154-59-2
p-Toluene Sulfonic Acid Monohydrate Cr 500g 6192-52-5
4-Chlorobenzoic acid, 99% 74-11-3
Chlortetracycline Hydrochloride, can be used as Secondary Standard 64-72-2
2-Bromopyridine-N-oxide hydrochloride, 97% 80866-91-7
2,6-Difluorophenylacetic Acid, 99% (Titr.) 85068-28-6
4-Aminobenzoic Acid, Sodium Salt, Hydrate 555-06-6
Neocuproine hydrochloride monohydrate, 99% 7296-20-0
9-Fluorenylmethyl chloroformate 97% 28920-43-6
Butadiene monoxide, 97% 930-22-3
L-(-)-Fucose, 97% 2438-80-4
Ethenesulfonyl fluoride, 97% (gc) 677-25-8
P-(2,4-Dinitroanilino)phenol Moist Solid Containing 30% Water 119-15-3
1,3-Dichlorobenzene, 98% 541-73-1
Bis-(acetonitrile)-palladium(ii)chloride, 99% 14592-56-4
Tri-tert-butyl borate, 98% 7397-43-5
D(-)-Glucose Diethyl Mercaptal 1941-52-2
Piperonylonitrile, 97% 4421-09-4
D(+)-Alpha-Bromocamphor-Pi-Sulfonic Acid Ammonium Salt, 99% 14575-84-9
3-Iodoaniline, 98% 626-01-7
Citronellol, 95% 106-22-9
Methyl-5-doxyl-stearate, free radical 38568-24-0
N-Methyl-N-Phenylcarbamoyl Chloride, 99% (Titr.) 4285-42-1
Alpha, Alpha,2-Trichloro-6-Fluorotoluene, 99% 62476-62-4
3-(2-Maleimidoethyl-carbomoyl)-Proxyl, Free Radical 66641-27-8
(Methoxymethyl)-triphenylphosphonium chloride, 98% 4009-98-7
n-Methylisatoic anhydride, tech., 90+% 10328-92-4
(+)-Camptothecin, 98% 7689-03-4
Pentachlorophenol 87-86-5
Humic acid, sodium salt, tech 68131-04-4
N-Aminophthalimide, Tech., 90+% 1875-48-5
n-Acetyl-s-phenyl-l-cysteine methyl ester 19542-77-9
3-(4-Hydroxyphenyl)propionic acid, 98% 501-97-3

Free MSDS Search ( Providing 250,000+ Material Properties )
Chemcas.com| Ads link:todaystock.net