**** SECTION 2 - COMPOSITION, INFORMATION ON INGREDIENTS ****
+----------------+--------------------------------------+----------+-----------+
| CAS# | Chemical Name | % | EINECS# |
|----------------|--------------------------------------|----------|-----------|
| 930-22-3 |Butadiene monoxide, 97% | 97% | 213-210-4 |
+----------------+--------------------------------------+----------+-----------+
Hazard Symbols: XN F
Risk Phrases: 11 40
**** SECTION 3 - HAZARDS IDENTIFICATION ****
EMERGENCY OVERVIEW
Highly flammable. Limited evidence of a carcinogenic effect.Cancer
suspect agent.Moisture sensitive.
Potential Health Effects
Eye:
May cause eye irritation.
Skin:
May cause skin irritation.
Ingestion:
May cause gastrointestinal irritation with nausea, vomiting and
diarrhea.
Inhalation:
May cause respiratory tract irritation.
Chronic:
May cause cancer in humans.
**** SECTION 4 - FIRST AID MEASURES ****
Eyes:
Immediately flush eyes with plenty of water for at least 15 minutes,
occasionally lifting the upper and lower eyelids. Get medical aid
immediately.
Skin:
Flush skin with plenty of water for at least 15 minutes while
removing contaminated clothing and shoes. Get medical aid if
irritation develops or persists.
Ingestion:
Do not induce vomiting. If victim is conscious and alert, give 2-4
cupfuls of milk or water. Never give anything by mouth to an
unconscious person. Get medical aid.
Inhalation:
Remove from exposure and move to fresh air immediately. If not
breathing, give artificial respiration. If breathing is difficult,
give oxygen. Get medical aid.
Notes to Physician:
**** SECTION 5 - FIRE FIGHTING MEASURES ****
General Information:
As in any fire, wear a self-contained breathing apparatus in
pressure-demand, MSHA/NIOSH (approved or equivalent), and full
protective gear. Vapors can travel to a source of ignition and flash
back. Will burn if involved in a fire. Containers may explode in the
heat of a fire.
Extinguishing Media:
Use water spray, dry chemical, carbon dioxide, or chemical foam.
**** SECTION 6 - ACCIDENTAL RELEASE MEASURES ****
General Information: Use proper personal protective equipment as indicated
in Section 8.
Spills/Leaks:
Absorb spill with inert material (e.g. vermiculite, sand or earth),
then place in suitable container. Clean up spills immediately,
observing precautions in the Protective Equipment section. Scoop up
with a nonsparking tool, then place into a suitable container for
disposal.
**** SECTION 7 - HANDLING and STORAGE ****
Handling:
Wash thoroughly after handling. Wash hands before eating. Use only
in a well-ventilated area. Use spark-proof tools and explosion proof
equipment. Avoid breathing dust, vapor, mist, or gas. Avoid contact
with skin and eyes. Avoid ingestion and inhalation.
Storage:
Keep away from sources of ignition. Store in a cool, dry place.
Store in a tightly closed container. Refrigerator/flammables.
**** SECTION 8 - EXPOSURE CONTROLS, PERSONAL PROTECTION ****
Engineering Controls:
Use process enclosure, local exhaust ventilation, or other
engineering controls to control airborne levels below recommended
exposure limits.
Exposure Limits
CAS# 930-22-3:
Personal Protective Equipment
Eyes:
Wear appropriate protective eyeglasses or chemical
safety goggles as described by OSHA's eye and face
protection regulations in 29 CFR 1910.133 or European
Standard EN166.
Skin:
Wear appropriate protective gloves to prevent skin
exposure.
Clothing:
Wear appropriate protective clothing to prevent skin
exposure.
Respirators:
Follow the OSHA respirator regulations found in 29
CFR 1910.134 or European Standard EN 149. Use a
NIOSH/MSHA or European Standard EN 149 approved
respirator if exposure limits are exceeded or if
irritation or other symptoms are experienced.
**** SECTION 9 - PHYSICAL AND CHEMICAL PROPERTIES ****
Physical State: Liquid
Color: colorless
Odor: Not available.
pH: Not available.
Vapor Pressure: Not available.
Viscosity: Not available.
Boiling Point: 65 - 66 deg C @ 760.00mm Hg
Freezing/Melting Point: -135 deg C
Autoignition Temperature: 430 deg C ( 806.00 deg F)
Flash Point: -50 deg C ( -58.00 deg F)
Explosion Limits, lower: Not available.
Explosion Limits, upper: Not available.
Decomposition Temperature:
Solubility in water:
Specific Gravity/Density: .8700g/cm3
Molecular Formula: C4H6O
Molecular Weight: 70.09
**** SECTION 10 - STABILITY AND REACTIVITY ****
Chemical Stability:
Unstable.
Conditions to Avoid:
High temperatures, mechanical shock, incompatible materials, ignition
sources, excess heat, exposure to moist air or water.
Incompatibilities with Other Materials:
Acids, bases, and oxidizing agents.
Hazardous Decomposition Products:
Carbon monoxide, carbon dioxide.
Hazardous Polymerization: Has not been reported.
**** SECTION 11 - TOXICOLOGICAL INFORMATION ****
RTECS#:
CAS# 930-22-3: EM7350000
LD50/LC50:
Not available.
Carcinogenicity:
Butadiene monoxide, 97% -
Not listed by ACGIH, IARC, or NTP.
Other:
See actual entry in RTECS for complete information.
**** SECTION 12 - ECOLOGICAL INFORMATION ****
**** SECTION 13 - DISPOSAL CONSIDERATIONS ****
Dispose of in a manner consistent with federal, state, and local regulations.
**** SECTION 14 - TRANSPORT INFORMATION ****
IATA
Shipping Name: FLAMMABLE LIQUID, N.O.S.*
Hazard Class: 3
UN Number: 1993
Packing Group: II
IMO
Shipping Name: FLAMMABLE LIQUID, N.O.S.
Hazard Class: 3.1
UN Number: 1993
Packing Group: II
RID/ADR
Shipping Name: FLAMMABLE LIQUID, N.O.S.
Hazard Class: 3
UN Number: 1993
Packing group: II
**** SECTION 15 - REGULATORY INFORMATION ****
European/International Regulations
European Labeling in Accordance with EC Directives
Hazard Symbols: XN F
Risk Phrases:
R 11 Highly flammable.
R 40 Limited evidence of a carcinogenic effect.
Safety Phrases:
S 16 Keep away from sources of ignition - No
smoking.
S 36/37 Wear suitable protective clothing and
gloves.
S 45 In case of accident or if you feel unwell, seek
medical advice immediately (show the label where
possible).
WGK (Water Danger/Protection)
CAS# 930-22-3: No information available.
Canada
CAS# 930-22-3 is listed on Canada's NDSL List.
CAS# 930-22-3 is not listed on Canada's Ingredient Disclosure List.
US FEDERAL
TSCA
CAS# 930-22-3 is listed on the TSCA inventory.
**** SECTION 16 - ADDITIONAL INFORMATION ****
MSDS Creation Date: 9/02/1997 Revision #2 Date: 3/18/2003
The information above is believed to be accurate and represents the best
information currently available to us. However, we make no warranty of
merchantability or any other warranty, express or implied, with respect to
such information, and we assume no liability resulting from its use. Users
should make their own investigations to determine the suitability of the
information for their particular purposes. In no way shall the company be
liable for any claims, losses, or damages of any third party or for lost
profits or any special, indirect, incidental, consequential or exemplary
damages, howsoever arising, even if the company has been advised of
the possibility of such damages.
--------------------------------------------------------------------------------
--------------------------------------------------------------------------------
|
|
|
ALL MSDS PAGES IN THIS GROUP
| NAME | CAS |
1-Phenyl-4,5-Dichloro-6-Pyridazone, 99+%
| 1698-53-9 |
N,N-Dimethyl-P-Phenylenediamine Dihydrochloride 99%
| 536-46-9 |
1-Adamantanecarboxylic Acid, 99%
| 828-51-3 |
Dl-2-(M-Chlorophenoxy)Propionic Acid, 98%
| 101-10-0 |
Mercaptoacetic acid, sodium salt, 98%
| 367-51-1 |
Heptanophenone, 98+%
| 1671-75-6 |
Cyclobutanone, 98+%
| 1191-95-3 |
m-Tolualdehyde, 98%, stabilized with 0.1% Hydroquinone
| 620-23-5 |
D(+)-raffinose pentahydrate, 99+%
| 17629-30-0 |
Cyclohexanone 2,4-Dinitrophenylhydrazone, 99+%
| 1589-62-4 |
DL-Aspartic Acid
| 617-45-8 |
Diallyldisulfide, 70%, Remainder Mainly Diallyl Sulfide
| 2179-57-9 |
DL-2-Aminoadipic Acid Hydrate
| 542-32-5 |
3,3'-Diethylthiatricarbocyanine Iodide, Laser Grade
| 3071-70-3 |
Hexadecanedioic acid, 97%
| 505-54-4 |
Sodium tri-sec-butylborohydride, 1M solution in tetrahydrofuran
| 109-99-9 |
L-Phenylalanine Methyl Ester Hydrochloride, 98%
| 7524-50-7 |
3,3',4',5-Tetrachlorosalicylanilide, 99% (UV-Vis)
| 1154-59-2 |
p-Toluene Sulfonic Acid Monohydrate Cr 500g
| 6192-52-5 |
4-Chlorobenzoic acid, 99%
| 74-11-3 |
Chlortetracycline Hydrochloride, can be used as Secondary Standard
| 64-72-2 |
2-Bromopyridine-N-oxide hydrochloride, 97%
| 80866-91-7 |
2,6-Difluorophenylacetic Acid, 99% (Titr.)
| 85068-28-6 |
4-Aminobenzoic Acid, Sodium Salt, Hydrate
| 555-06-6 |
Neocuproine hydrochloride monohydrate, 99%
| 7296-20-0 |
9-Fluorenylmethyl chloroformate 97%
| 28920-43-6 |
Butadiene monoxide, 97%
| 930-22-3 |
L-(-)-Fucose, 97%
| 2438-80-4 |
Ethenesulfonyl fluoride, 97% (gc)
| 677-25-8 |
P-(2,4-Dinitroanilino)phenol Moist Solid Containing 30% Water
| 119-15-3 |
1,3-Dichlorobenzene, 98%
| 541-73-1 |
Bis-(acetonitrile)-palladium(ii)chloride, 99%
| 14592-56-4 |
Tri-tert-butyl borate, 98%
| 7397-43-5 |
D(-)-Glucose Diethyl Mercaptal
| 1941-52-2 |
Piperonylonitrile, 97%
| 4421-09-4 |
D(+)-Alpha-Bromocamphor-Pi-Sulfonic Acid Ammonium Salt, 99%
| 14575-84-9 |
3-Iodoaniline, 98%
| 626-01-7 |
Citronellol, 95%
| 106-22-9 |
Methyl-5-doxyl-stearate, free radical
| 38568-24-0 |
N-Methyl-N-Phenylcarbamoyl Chloride, 99% (Titr.)
| 4285-42-1 |
Alpha, Alpha,2-Trichloro-6-Fluorotoluene, 99%
| 62476-62-4 |
3-(2-Maleimidoethyl-carbomoyl)-Proxyl, Free Radical
| 66641-27-8 |
(Methoxymethyl)-triphenylphosphonium chloride, 98%
| 4009-98-7 |
n-Methylisatoic anhydride, tech., 90+%
| 10328-92-4 |
(+)-Camptothecin, 98%
| 7689-03-4 |
Pentachlorophenol
| 87-86-5 |
Humic acid, sodium salt, tech
| 68131-04-4 |
N-Aminophthalimide, Tech., 90+%
| 1875-48-5 |
n-Acetyl-s-phenyl-l-cysteine methyl ester
| 19542-77-9 |
3-(4-Hydroxyphenyl)propionic acid, 98%
| 501-97-3 |
|
|