Search   
MSDS 
:
 Neocuproine hydrochloride monohydrate, 99%
CAS 
:
 7296-20-0
SYNONYMS 
:
 2,9-Dimethyl-1,10-phenanthroline hydrochloride monohydrate
**** SECTION 2 - COMPOSITION, INFORMATION ON INGREDIENTS ****

+----------------+--------------------------------------+----------+-----------+
| CAS# | Chemical Name | % | EINECS# |
|----------------|--------------------------------------|----------|-----------|
| 7296-20-0 |Neocuproine hydrochloride monohydrate,| 98% | 230-732-8 |
| | 98% | | |
+----------------+--------------------------------------+----------+-----------+
Hazard Symbols: None Listed.
Risk Phrases: None Listed.

**** SECTION 3 - HAZARDS IDENTIFICATION ****

EMERGENCY OVERVIEW
The toxicological properties of this material have not been fully
investigated.Light sensitive.

Potential Health Effects
Eye:
May cause eye irritation.
Skin:
May cause skin irritation.
Ingestion:
The toxicological properties of this substance have not been fully
investigated. Expected to be a low ingestion hazard.
Inhalation:
May cause respiratory tract irritation. The toxicological properties
of this substance have not been fully investigated.
Chronic:
No information found.

**** SECTION 4 - FIRST AID MEASURES ****

Eyes:
Flush eyes with plenty of water for at least 15 minutes,
occasionally lifting the upper and lower eyelids. Get medical aid
immediately.
Skin:
Get medical aid. Flush skin with plenty of water for at least 15
minutes while removing contaminated clothing and shoes.
Ingestion:
If victim is conscious and alert, give 2-4 cupfuls of milk or water.
Get medical aid immediately.
Inhalation:
Get medical aid immediately. Remove from exposure and move to fresh
air immediately. If not breathing, give artificial respiration. If
breathing is difficult, give oxygen.
Notes to Physician:

**** SECTION 5 - FIRE FIGHTING MEASURES ****

General Information:
As in any fire, wear a self-contained breathing apparatus in
pressure-demand, MSHA/NIOSH (approved or equivalent), and full
protective gear.
Extinguishing Media:
Use water spray, dry chemical, carbon dioxide, or chemical foam.

**** SECTION 6 - ACCIDENTAL RELEASE MEASURES ****

General Information: Use proper personal protective equipment as indicated
in Section 8.
Spills/Leaks:
Vacuum or sweep up material and place into a suitable disposal
container.

**** SECTION 7 - HANDLING and STORAGE ****

Handling:
Wash thoroughly after handling. Use with adequate ventilation. Avoid
contact with skin and eyes. Avoid ingestion and inhalation. Store
protected from light.
Storage:
Store in a cool, dry place. Store in a tightly closed container.

**** SECTION 8 - EXPOSURE CONTROLS, PERSONAL PROTECTION ****

Engineering Controls:
Facilities storing or utilizing this material should be equipped
with an eyewash facility and a safety shower. Use process enclosure,
local exhaust ventilation, or other engineering controls to control
airborne levels.
Exposure Limits
CAS# 7296-20-0:


Personal Protective Equipment

Eyes:
Wear appropriate protective eyeglasses or chemical
safety goggles as described by OSHA's eye and face
protection regulations in 29 CFR 1910.133 or European
Standard EN166.
Skin:
Wear appropriate gloves to prevent skin exposure.
Clothing:
Wear appropriate protective clothing to prevent skin
exposure.
Respirators:
Follow the OSHA respirator regulations found in 29
CFR 1910.134 or European Standard EN 149. Use a
NIOSH/MSHA or European Standard EN 149 approved
respirator if exposure limits are exceeded or if
irritation or other symptoms are experienced.

**** SECTION 9 - PHYSICAL AND CHEMICAL PROPERTIES ****

Physical State: Solid
Color: white
Odor: Not available.
pH: Not available.
Vapor Pressure: Not available.
Viscosity: Not available.
Boiling Point: Not available.
Freezing/Melting Point: 250 deg C dec
Autoignition Temperature: Not available.
Flash Point: 250 deg C ( 482.00 deg F)
Explosion Limits, lower: Not available.
Explosion Limits, upper: Not available.
Decomposition Temperature: 250 deg C
Solubility in water:
Specific Gravity/Density:
Molecular Formula: C14H12N2.HCl.H2O
Molecular Weight: 262.75

**** SECTION 10 - STABILITY AND REACTIVITY ****

Chemical Stability:
Stable under normal temperatures and pressures.
Conditions to Avoid:
Light.
Incompatibilities with Other Materials:
Strong oxidizing agents.
Hazardous Decomposition Products:
Nitrogen oxides, carbon monoxide, carbon dioxide.
Hazardous Polymerization: Has not been reported

**** SECTION 11 - TOXICOLOGICAL INFORMATION ****

RTECS#:
CAS# 7296-20-0 unlisted.
LD50/LC50:
Not available.
Carcinogenicity:
Neocuproine hydrochloride monohydrate, 98% -
Not listed by ACGIH, IARC, or NTP.

**** SECTION 12 - ECOLOGICAL INFORMATION ****



**** SECTION 13 - DISPOSAL CONSIDERATIONS ****

Dispose of in a manner consistent with federal, state, and local regulations.

**** SECTION 14 - TRANSPORT INFORMATION ****

IATA
Not regulated as a hazardous material.
IMO
Not regulated as a hazardous material.
RID/ADR
Not regulated as a hazardous material.

**** SECTION 15 - REGULATORY INFORMATION ****

European/International Regulations
European Labeling in Accordance with EC Directives
Hazard Symbols: Not available.
Risk Phrases:
Safety Phrases:
S 24/25 Avoid contact with skin and eyes.
WGK (Water Danger/Protection)
CAS# 7296-20-0: No information available.
Canada
CAS# 7296-20-0 is listed on Canada's DSL List.
CAS# 7296-20-0 is not listed on Canada's Ingredient Disclosure List.
US FEDERAL
TSCA
CAS# 7296-20-0 is listed on the TSCA inventory.

**** SECTION 16 - ADDITIONAL INFORMATION ****

MSDS Creation Date: 9/02/1997 Revision #2 Date: 3/18/2003

The information above is believed to be accurate and represents the best
information currently available to us. However, we make no warranty of
merchantability or any other warranty, express or implied, with respect to
such information, and we assume no liability resulting from its use. Users
should make their own investigations to determine the suitability of the
information for their particular purposes. In no way shall the company be
liable for any claims, losses, or damages of any third party or for lost
profits or any special, indirect, incidental, consequential or exemplary
damages, howsoever arising, even if the company has been advised of
the possibility of such damages.
--------------------------------------------------------------------------------
--------------------------------------------------------------------------------
Search More   
ALL MSDS PAGES IN THIS GROUP
NAMECAS
1-Phenyl-4,5-Dichloro-6-Pyridazone, 99+% 1698-53-9
N,N-Dimethyl-P-Phenylenediamine Dihydrochloride 99% 536-46-9
1-Adamantanecarboxylic Acid, 99% 828-51-3
Dl-2-(M-Chlorophenoxy)Propionic Acid, 98% 101-10-0
Mercaptoacetic acid, sodium salt, 98% 367-51-1
Heptanophenone, 98+% 1671-75-6
Cyclobutanone, 98+% 1191-95-3
m-Tolualdehyde, 98%, stabilized with 0.1% Hydroquinone 620-23-5
D(+)-raffinose pentahydrate, 99+% 17629-30-0
Cyclohexanone 2,4-Dinitrophenylhydrazone, 99+% 1589-62-4
DL-Aspartic Acid 617-45-8
Diallyldisulfide, 70%, Remainder Mainly Diallyl Sulfide 2179-57-9
DL-2-Aminoadipic Acid Hydrate 542-32-5
3,3'-Diethylthiatricarbocyanine Iodide, Laser Grade 3071-70-3
Hexadecanedioic acid, 97% 505-54-4
Sodium tri-sec-butylborohydride, 1M solution in tetrahydrofuran 109-99-9
L-Phenylalanine Methyl Ester Hydrochloride, 98% 7524-50-7
3,3',4',5-Tetrachlorosalicylanilide, 99% (UV-Vis) 1154-59-2
p-Toluene Sulfonic Acid Monohydrate Cr 500g 6192-52-5
4-Chlorobenzoic acid, 99% 74-11-3
Chlortetracycline Hydrochloride, can be used as Secondary Standard 64-72-2
2-Bromopyridine-N-oxide hydrochloride, 97% 80866-91-7
2,6-Difluorophenylacetic Acid, 99% (Titr.) 85068-28-6
4-Aminobenzoic Acid, Sodium Salt, Hydrate 555-06-6
Neocuproine hydrochloride monohydrate, 99% 7296-20-0
9-Fluorenylmethyl chloroformate 97% 28920-43-6
Butadiene monoxide, 97% 930-22-3
L-(-)-Fucose, 97% 2438-80-4
Ethenesulfonyl fluoride, 97% (gc) 677-25-8
P-(2,4-Dinitroanilino)phenol Moist Solid Containing 30% Water 119-15-3
1,3-Dichlorobenzene, 98% 541-73-1
Bis-(acetonitrile)-palladium(ii)chloride, 99% 14592-56-4
Tri-tert-butyl borate, 98% 7397-43-5
D(-)-Glucose Diethyl Mercaptal 1941-52-2
Piperonylonitrile, 97% 4421-09-4
D(+)-Alpha-Bromocamphor-Pi-Sulfonic Acid Ammonium Salt, 99% 14575-84-9
3-Iodoaniline, 98% 626-01-7
Citronellol, 95% 106-22-9
Methyl-5-doxyl-stearate, free radical 38568-24-0
N-Methyl-N-Phenylcarbamoyl Chloride, 99% (Titr.) 4285-42-1
Alpha, Alpha,2-Trichloro-6-Fluorotoluene, 99% 62476-62-4
3-(2-Maleimidoethyl-carbomoyl)-Proxyl, Free Radical 66641-27-8
(Methoxymethyl)-triphenylphosphonium chloride, 98% 4009-98-7
n-Methylisatoic anhydride, tech., 90+% 10328-92-4
(+)-Camptothecin, 98% 7689-03-4
Pentachlorophenol 87-86-5
Humic acid, sodium salt, tech 68131-04-4
N-Aminophthalimide, Tech., 90+% 1875-48-5
n-Acetyl-s-phenyl-l-cysteine methyl ester 19542-77-9
3-(4-Hydroxyphenyl)propionic acid, 98% 501-97-3

Free MSDS Search ( Providing 250,000+ Material Properties )
Chemcas.com| Ads link:todaystock.net