Search   
MSDS 
:
 (+/-)-2-Amino-1-butanol, 97%
CAS 
:
 13054-87-0
SYNONYMS 
:
 2-Aminobutan-1-ol.
**** SECTION 2 - COMPOSITION, INFORMATION ON INGREDIENTS ****

+----------------+--------------------------------------+----------+-----------+
| CAS# | Chemical Name | % | EINECS# |
|----------------|--------------------------------------|----------|-----------|
| 13054-87-0 |(+/-)-2-Amino-1-butanol | 97 | 235-940-2 |
+----------------+--------------------------------------+----------+-----------+
Hazard Symbols: C
Risk Phrases: 22 34

**** SECTION 3 - HAZARDS IDENTIFICATION ****

EMERGENCY OVERVIEW
Harmful if swallowed. Causes burns.

Potential Health Effects
Eye:
Causes eye burns.
Skin:
Causes skin burns.
Ingestion:
Causes gastrointestinal tract burns. May cause central nervous
system depression, characterized by excitement, followed by headache,
dizziness, drowsiness, and nausea. Advanced stages may cause
collapse, unconsciousness, coma and possible death due to respiratory
failure. May cause cardiac disturbances.
Inhalation:
Causes chemical burns to the respiratory tract. Aspiration may lead
to pulmonary edema. May cause cardiac abnormalities. Inhalation at
high concentrations may cause CNS depression and asphixiation.
Chronic:
No information found.

**** SECTION 4 - FIRST AID MEASURES ****

Eyes:
Get medical aid immediately. Do NOT allow victim to rub eyes or keep
eyes closed. Extensive irrigation with water is required (at least 30
minutes).
Skin:
Get medical aid immediately. Immediately flush skin with plenty of
water for at least 15 minutes while removing contaminated clothing
and shoes.
Ingestion:
Do not induce vomiting. If victim is conscious and alert, give 2-4
cupfuls of milk or water. Get medical aid immediately.
Inhalation:
Get medical aid immediately. Remove from exposure and move to fresh
air immediately. If breathing is difficult, give oxygen. Do NOT use
mouth-to-mouth resuscitation. If breathing has ceased apply
artificial respiration using oxygen and a suitable mechanical device
such as a bag and a mask.
Notes to Physician:

**** SECTION 5 - FIRE FIGHTING MEASURES ****

General Information:
As in any fire, wear a self-contained breathing apparatus in
pressure-demand, MSHA/NIOSH (approved or equivalent), and full
protective gear. During a fire, irritating and highly toxic gases
may be generated by thermal decomposition or combustion. Use water
spray to keep fire-exposed containers cool. Contact with metals may
evolve flammable hydrogen gas. Containers may explode when heated.
Runoff from fire control or dilution water may cause pollution.
Combustible liquid and vapor.
Extinguishing Media:
Use water spray to cool fire-exposed containers. Do NOT get water
inside containers. For small fires, use dry chemical, carbon
dioxide, or water spray. For large fires, use dry chemical, carbon
dioxide, alcohol-resistant foam, or water spray.

**** SECTION 6 - ACCIDENTAL RELEASE MEASURES ****

General Information: Use proper personal protective equipment as indicated
in Section 8.
Spills/Leaks:
Absorb spill with inert material (e.g. vermiculite, sand or earth),
then place in suitable container. Avoid runoff into storm sewers and
ditches which lead to waterways. Wash area with soap and water. Clean
up spills immediately, observing precautions in the Protective
Equipment section. Remove all sources of ignition. Use a spark-proof
tool. Provide ventilation.

**** SECTION 7 - HANDLING and STORAGE ****

Handling:
Wash thoroughly after handling. Remove contaminated clothing and
wash before reuse. Avoid contact with eyes, skin, and clothing. Empty
containers retain product residue, (liquid and/or vapor), and can be
dangerous. Keep container tightly closed. Avoid ingestion and
inhalation. Use only in a chemical fume hood. Do not pressurize,
cut, weld, braze, solder, drill, grind, or expose empty containers to
heat, sparks or open flames. Keep away from heat and flame.
Storage:
Keep away from sources of ignition. Store in a tightly closed
container. Store in a cool, dry, well-ventilated area away from
incompatible substances. Corrosives area.

**** SECTION 8 - EXPOSURE CONTROLS, PERSONAL PROTECTION ****

Engineering Controls:
Facilities storing or utilizing this material should be equipped
with an eyewash facility and a safety shower. Use adequate
ventilation to keep airborne concentrations low. Use only under a
chemical fume hood.
Exposure Limits
CAS# 13054-87-0:


Personal Protective Equipment

Eyes:
Wear chemical splash goggles.
Skin:
Wear appropriate protective gloves to prevent skin
exposure.
Clothing:
Wear appropriate protective clothing to prevent skin
exposure.
Respirators:
Follow the OSHA respirator regulations found in 29
CFR 1910.134 or European Standard EN 149. Use a
NIOSH/MSHA or European Standard EN 149 approved
respirator if exposure limits are exceeded or if
irritation or other symptoms are experienced.

**** SECTION 9 - PHYSICAL AND CHEMICAL PROPERTIES ****

Physical State: Liquid
Color: Clear
Odor: Faint amine odor.
pH: Not available.
Vapor Pressure: Not available.
Viscosity: Not available.
Boiling Point: 176 - 178 deg C @ 760 mm Hg
Freezing/Melting Point: -2 deg C
Autoignition Temperature: Not applicable.
Flash Point: 84 deg C ( 183.20 deg F)
Explosion Limits, lower: Not available.
Explosion Limits, upper: Not available.
Decomposition Temperature:
Solubility in water: soluble in water
Specific Gravity/Density: .9430g/cm3
Molecular Formula: C2H5CH(NH2)CH2OH
Molecular Weight: 89.14

**** SECTION 10 - STABILITY AND REACTIVITY ****

Chemical Stability:
Stable under normal temperatures and pressures.
Conditions to Avoid:
Ignition sources, excess heat.
Incompatibilities with Other Materials:
Strong oxidizing agents, strong acids.
Hazardous Decomposition Products:
Nitrogen oxides, carbon monoxide, carbon dioxide.
Hazardous Polymerization: Has not been reported.

**** SECTION 11 - TOXICOLOGICAL INFORMATION ****

RTECS#:
CAS# 13054-87-0 unlisted.
LD50/LC50:
Not available.
Carcinogenicity:
(+/-)-2-Amino-1-butanol -
Not listed by ACGIH, IARC, or NTP.

**** SECTION 12 - ECOLOGICAL INFORMATION ****



**** SECTION 13 - DISPOSAL CONSIDERATIONS ****

Dispose of in a manner consistent with federal, state, and local regulations.

**** SECTION 14 - TRANSPORT INFORMATION ****

IATA
Shipping Name: AMINES, LIQUID, CORROSIVE, N.O.S.*
Hazard Class: 8
UN Number: 2735
Packing Group: III
IMO
Shipping Name: AMINES, LIQUID, CORROSIVE, N.O.S.
Hazard Class: 8
UN Number: 2735
Packing Group: III
RID/ADR
Shipping Name: AMINES, LIQUID, CORROSIVE, N.O.S.
Hazard Class: 8
UN Number: 2735
Packing group: III

**** SECTION 15 - REGULATORY INFORMATION ****

European/International Regulations
European Labeling in Accordance with EC Directives
Hazard Symbols: C
Risk Phrases:
R 22 Harmful if swallowed.
R 34 Causes burns.
Safety Phrases:
S 25 Avoid contact with eyes.
S 36/37/39 Wear suitable protective clothing, gloves
and eye/face protection.
S 45 In case of accident or if you feel unwell, seek
medical advice immediately (show the label where
possible).
WGK (Water Danger/Protection)
CAS# 13054-87-0: 1
Canada
None of the chemicals in this product are listed on the DSL/NDSL list.
CAS# 13054-87-0 is not listed on Canada's Ingredient Disclosure List.
US FEDERAL
TSCA
CAS# 13054-87-0 is not listed on the TSCA inventory.
It is for research and development use only.

**** SECTION 16 - ADDITIONAL INFORMATION ****

MSDS Creation Date: 9/02/1997 Revision #5 Date: 12/21/2004

The information above is believed to be accurate and represents the best
information currently available to us. However, we make no warranty of
merchantability or any other warranty, express or implied, with respect to
such information, and we assume no liability resulting from its use. Users
should make their own investigations to determine the suitability of the
information for their particular purposes. In no way shall the company be
liable for any claims, losses, or damages of any third party or for lost
profits or any special, indirect, incidental, consequential or exemplary
damages, howsoever arising, even if the company has been advised of
the possibility of such damages.
--------------------------------------------------------------------------------
--------------------------------------------------------------------------------
Search More   
ALL MSDS PAGES IN THIS GROUP
NAMECAS
1-Iododecane, 99% (GC) 2050-77-3
N-Methylmaleamic Acid, 99+% 6936-48-7
9-Bromophenanthrene, 96% 573-17-1
N-(2-Chloroethyl)acetamide, 98% 7355-58-0
3-Nitrobenzenesulfonyl chloride, 97% 121-51-7
1,3-Diiodopropane, 99% 627-31-6
Ammonium Sulfobetaine - 15 % Solution in Water 0-00-1
2-Amino-3-picoline, 96% 1603-40-3
2-Amino-4-Phenyl-5-N-Tetradecylthiazole, 98% 64415-14-1
3-Endo-Aminobicyclo??2.2.1??Hept-5-ene-2-Endo-Carboxamide, 99+% 105786-38-7
Palladium on activated carbon (3% pd)
Triphenylethylene, 98+% 58-72-0
Zirconyl(IV)-nitrate hydrate 14985-18-3
3-Hydrazinoquinoline dihydrochloride, 96% (titr.) 61621-35-0
Vinyl crotonate, 98% 14861-06-4
Cyclopropyl methyl carbinol, 96% 765-42-4
8,8'-Quinolyl Disulfide 1160-28-7
5-(Hydroxymethyl)Furfural, 98% 67-47-0
Beta-D-Ribofuranose 1-Acetate 2,3,5-Tri-Benzoate, 99+ % 6972-71-0
2,6-Dichloropurine, 97% 5451-40-1
9-Isopropylcarbazole 1484-09-9
alpha-Methylene-gamma-butyrolactone 547-65-9
Perfluoro-Compound FC-43 311-89-7
Hexanal, 96% 66-25-1
1-Chloro-4-Iodobenzene, 99% 637-87-6
(2R,3S)-(-)-2-Amino-3-hydroxy-4-methylpentanoic acid, 99.5+% 87421-23-6
5-Bromofuroic acid 585-70-6
Paraformaldehyde-D, 99+ atom% D 43094-80-0
Palladium(II) Acetate 3375-31-3
N-Glycyl-L-leucine 869-19-2
2-Aminopyridine, 99% (Titr.) 504-29-0
Terephthaldicarboxaldehyde, 98% 623-26-7
4-Hydroxy-3-methyl-2-butanone, tech. ca. 85% 3393-64-4
2-Chloroanthraquinone 131-09-9
2-Chloroethanol, 99+% 107-07-3
Benzilic acid, 99+% 76-93-7
trans-Diethyl caronate 67945-22-6
Quinine monohydrochloride dihydrate, 99% 6119-47-7
Ethyl 4-Chloroacetoacetate, 98% 638-07-3
2,4,6-Trinitrobenzenesulfonic acid, trihydrate, 90% (titr.) 2508-19-2
3,4-Dichlorobenzyl Chloride, 98+% 102-47-6
4-Aminobutyraldehyde diethyl acetal, ca. 95%(GC) 6346-09-4
Methyl propiolate, 99% 922-67-8
2-Mercaptobenzimidazole, 98% 583-39-1
(+/-)-2-Amino-1-butanol, 97% 13054-87-0
2-Hydrazinobenzoic Acid Hydrochloride, 97% (Titr.) 52356-01-1
Tetraphenylarsonium Chloride Hydrochloride Dihydrate, 97% 21006-74-6
Resazurin, sodium salt (cert), 85% (uv-vis ) 62758-13-8
4-Hydroxy-3-Nitrobenzaldehyde, 97% 3011-34-5
Tributyl Citrate, 99+% (GC) 77-94-1

Free MSDS Search ( Providing 250,000+ Material Properties )
Chemcas.com| Ads link:todaystock.net