Search   
MSDS 
:
 Hexanal, 96%
CAS 
:
 66-25-1
SYNONYMS 
:
 Caproaldehyde; Hexaldehyde; Caproic aldehyde.
**** SECTION 2 - COMPOSITION, INFORMATION ON INGREDIENTS ****

+----------------+--------------------------------------+----------+-----------+
| CAS# | Chemical Name | % | EINECS# |
|----------------|--------------------------------------|----------|-----------|
| 66-25-1 |Hexanal | 96.0 | 200-624-5 |
+----------------+--------------------------------------+----------+-----------+
Hazard Symbols: XI
Risk Phrases: 10 36/37/38

**** SECTION 3 - HAZARDS IDENTIFICATION ****

EMERGENCY OVERVIEW
Flammable. Irritating to eyes, respiratory system and skin.

Potential Health Effects
Eye:
Causes mild eye irritation. May cause chemical conjunctivitis and
corneal damage.
Skin:
Causes mild skin irritation. May cause dermatitis. May cause
cyanosis of the extremities.
Ingestion:
May cause gastrointestinal irritation with nausea, vomiting and
diarrhea. Expected to be a low ingestion hazard. Ingestion of large
amounts may cause CNS depression.
Inhalation:
May cause respiratory tract irritation. Aspiration may lead to
pulmonary edema. Vapors may cause dizziness or suffocation. May cause
burning sensation in the chest.
Chronic:
No information found.

**** SECTION 4 - FIRST AID MEASURES ****

Eyes:
Flush eyes with plenty of water for at least 15 minutes,
occasionally lifting the upper and lower eyelids. Get medical aid.
Skin:
Flush skin with plenty of water for at least 15 minutes while
removing contaminated clothing and shoes. Get medical aid if
irritation develops or persists. Wash clothing before reuse.
Ingestion:
If victim is conscious and alert, give 2-4 cupfuls of milk or water.
Never give anything by mouth to an unconscious person. Get medical
aid.
Inhalation:
Remove from exposure and move to fresh air immediately. If not
breathing, give artificial respiration. If breathing is difficult,
give oxygen. Get medical aid.
Notes to Physician:

**** SECTION 5 - FIRE FIGHTING MEASURES ****

General Information:
As in any fire, wear a self-contained breathing apparatus in
pressure-demand, MSHA/NIOSH (approved or equivalent), and full
protective gear. Vapors may form an explosive mixture with air. Use
water spray to keep fire-exposed containers cool. Containers may
explode in the heat of a fire. Flammable liquid and vapor. Vapors are
heavier than air and may travel to a source of ignition and flash
back. Vapors can spread along the ground and collect in low or
confined areas. This liquid floats on water and may travel to a
source of ignition and spread fire.
Extinguishing Media:
For small fires, use dry chemical, carbon dioxide, water spray or
alcohol-resistant foam. For large fires, use water spray, fog, or
alcohol-resistant foam. Use water spray to cool fire-exposed
containers. Water may be ineffective. Do NOT use straight streams of
water.

**** SECTION 6 - ACCIDENTAL RELEASE MEASURES ****

General Information: Use proper personal protective equipment as indicated
in Section 8.
Spills/Leaks:
Absorb spill with inert material (e.g. vermiculite, sand or earth),
then place in suitable container. Clean up spills immediately,
observing precautions in the Protective Equipment section. Remove all
sources of ignition. Use a spark-proof tool. Provide ventilation. A
vapor suppressing foam may be used to reduce vapors.

**** SECTION 7 - HANDLING and STORAGE ****

Handling:
Wash thoroughly after handling. Ground and bond containers when
transferring material. Use spark-proof tools and explosion proof
equipment. Avoid contact with eyes, skin, and clothing. Empty
containers retain product residue, (liquid and/or vapor), and can be
dangerous. Keep away from heat, sparks and flame. Avoid ingestion
and inhalation. Do not pressurize, cut, weld, braze, solder, drill,
grind, or expose empty containers to heat, sparks or open flames.
Use only with adequate ventilation.
Storage:
Keep away from heat, sparks, and flame. Keep away from sources of
ignition. Store in a tightly closed container. Keep under a nitrogen
blanket. Store in a cool, dry, well-ventilated area away from
incompatible substances. Flammables-area. Keep away from acids.
Refrigeration has been recommended.

**** SECTION 8 - EXPOSURE CONTROLS, PERSONAL PROTECTION ****

Engineering Controls:
Facilities storing or utilizing this material should be equipped
with an eyewash facility and a safety shower. Use adequate general or
local explosion-proof ventilation to keep airborne levels to
acceptable levels.
Exposure Limits
CAS# 66-25-1:


Personal Protective Equipment

Eyes:
Wear appropriate protective eyeglasses or chemical
safety goggles as described by OSHA's eye and face
protection regulations in 29 CFR 1910.133 or European
Standard EN166.
Skin:
Wear appropriate protective gloves to prevent skin
exposure.
Clothing:
Wear appropriate protective clothing to prevent skin
exposure.
Respirators:
Follow the OSHA respirator regulations found in 29
CFR 1910.134 or European Standard EN 149. Use a
NIOSH/MSHA or European Standard EN 149 approved
respirator if exposure limits are exceeded or if
irritation or other symptoms are experienced.

**** SECTION 9 - PHYSICAL AND CHEMICAL PROPERTIES ****

Physical State: Liquid
Color: colorless
Odor: pungent green grass odor; fruity odor on dilution
pH: Not available.
Vapor Pressure: 2.4 mbar @ 20 deg C
Viscosity: 0.69 mPas 20 deg C
Boiling Point: 131 deg C @ 760mm Hg
Freezing/Melting Point: -56 deg C
Autoignition Temperature: 220 deg C ( 428.00 deg F)
Flash Point: 32 deg C ( 89.60 deg F)
Explosion Limits, lower: Not available.
Explosion Limits, upper: Not available.
Decomposition Temperature:
Solubility in water: Insoluble.
Specific Gravity/Density: .83g/cm3 @ 20C
Molecular Formula: C6H12O
Molecular Weight: 100.16

**** SECTION 10 - STABILITY AND REACTIVITY ****

Chemical Stability:
Oxidizes when exposed to air. Autooxidizes and polymerizes,
especially in the presence of traces of acid.
Conditions to Avoid:
Incompatible materials, ignition sources, exposure to air, excess
heat, plastics, rubber.
Incompatibilities with Other Materials:
Strong oxidizing agents, bases, acids, strong reducing agents.
Hazardous Decomposition Products:
Carbon monoxide, carbon dioxide.
Hazardous Polymerization: May occur.

**** SECTION 11 - TOXICOLOGICAL INFORMATION ****

RTECS#:
CAS# 66-25-1: MN7175000
LD50/LC50:
CAS# 66-25-1: Draize test, rabbit, eye: 100 mg/24H Mild; Draize
test, rabbit, eye: 500 mg/24H Mild; Draize test, rabbit, skin: 500
mg/24H Mild; Oral, mouse: LD50 = 8292 mg/kg; Oral, rat: LD50 = 4890
mg/kg.
Carcinogenicity:
Hexanal -
Not listed by ACGIH, IARC, or NTP.
Other:
See actual entry in RTECS for complete information.

**** SECTION 12 - ECOLOGICAL INFORMATION ****

Ecotoxicity:
Fish: Fathead Minnow: LC50 = 724 mg/L; 96 Hr.; UnspecifiedFish:
Fathead Minnow: LC50 = 14.0 mg/L; 96 Hr.; Unspecified

**** SECTION 13 - DISPOSAL CONSIDERATIONS ****

Dispose of in a manner consistent with federal, state, and local regulations.

**** SECTION 14 - TRANSPORT INFORMATION ****

IATA
Shipping Name: HEXALDEHYDE
Hazard Class: 3
UN Number: 1207
Packing Group: III
IMO
Shipping Name: normal-HEXALDEHYDE
Hazard Class: 3.3
UN Number: 1207
Packing Group: III
RID/ADR
Shipping Name: HEXALDEHYDE
Hazard Class: 3
UN Number: 1207
Packing group: III

**** SECTION 15 - REGULATORY INFORMATION ****

European/International Regulations
European Labeling in Accordance with EC Directives
Hazard Symbols: XI
Risk Phrases:
R 10 Flammable.
R 36/37/38 Irritating to eyes, respiratory system
and skin.
Safety Phrases:
S 16 Keep away from sources of ignition - No
smoking.
S 26 In case of contact with eyes, rinse immediately
with plenty of water and seek medical advice.
S 37/39 Wear suitable gloves and eye/face
protection.
WGK (Water Danger/Protection)
CAS# 66-25-1: 1
Canada
CAS# 66-25-1 is listed on Canada's DSL List.
CAS# 66-25-1 is not listed on Canada's Ingredient Disclosure List.
US FEDERAL
TSCA
CAS# 66-25-1 is listed on the TSCA inventory.

**** SECTION 16 - ADDITIONAL INFORMATION ****

MSDS Creation Date: 7/21/1999 Revision #3 Date: 3/04/2004

The information above is believed to be accurate and represents the best
information currently available to us. However, we make no warranty of
merchantability or any other warranty, express or implied, with respect to
such information, and we assume no liability resulting from its use. Users
should make their own investigations to determine the suitability of the
information for their particular purposes. In no way shall the company be
liable for any claims, losses, or damages of any third party or for lost
profits or any special, indirect, incidental, consequential or exemplary
damages, howsoever arising, even if the company has been advised of
the possibility of such damages.
--------------------------------------------------------------------------------
--------------------------------------------------------------------------------
Search More   
ALL MSDS PAGES IN THIS GROUP
NAMECAS
1-Iododecane, 99% (GC) 2050-77-3
N-Methylmaleamic Acid, 99+% 6936-48-7
9-Bromophenanthrene, 96% 573-17-1
N-(2-Chloroethyl)acetamide, 98% 7355-58-0
3-Nitrobenzenesulfonyl chloride, 97% 121-51-7
1,3-Diiodopropane, 99% 627-31-6
Ammonium Sulfobetaine - 15 % Solution in Water 0-00-1
2-Amino-3-picoline, 96% 1603-40-3
2-Amino-4-Phenyl-5-N-Tetradecylthiazole, 98% 64415-14-1
3-Endo-Aminobicyclo??2.2.1??Hept-5-ene-2-Endo-Carboxamide, 99+% 105786-38-7
Palladium on activated carbon (3% pd)
Triphenylethylene, 98+% 58-72-0
Zirconyl(IV)-nitrate hydrate 14985-18-3
3-Hydrazinoquinoline dihydrochloride, 96% (titr.) 61621-35-0
Vinyl crotonate, 98% 14861-06-4
Cyclopropyl methyl carbinol, 96% 765-42-4
8,8'-Quinolyl Disulfide 1160-28-7
5-(Hydroxymethyl)Furfural, 98% 67-47-0
Beta-D-Ribofuranose 1-Acetate 2,3,5-Tri-Benzoate, 99+ % 6972-71-0
2,6-Dichloropurine, 97% 5451-40-1
9-Isopropylcarbazole 1484-09-9
alpha-Methylene-gamma-butyrolactone 547-65-9
Perfluoro-Compound FC-43 311-89-7
Hexanal, 96% 66-25-1
1-Chloro-4-Iodobenzene, 99% 637-87-6
(2R,3S)-(-)-2-Amino-3-hydroxy-4-methylpentanoic acid, 99.5+% 87421-23-6
5-Bromofuroic acid 585-70-6
Paraformaldehyde-D, 99+ atom% D 43094-80-0
Palladium(II) Acetate 3375-31-3
N-Glycyl-L-leucine 869-19-2
2-Aminopyridine, 99% (Titr.) 504-29-0
Terephthaldicarboxaldehyde, 98% 623-26-7
4-Hydroxy-3-methyl-2-butanone, tech. ca. 85% 3393-64-4
2-Chloroanthraquinone 131-09-9
2-Chloroethanol, 99+% 107-07-3
Benzilic acid, 99+% 76-93-7
trans-Diethyl caronate 67945-22-6
Quinine monohydrochloride dihydrate, 99% 6119-47-7
Ethyl 4-Chloroacetoacetate, 98% 638-07-3
2,4,6-Trinitrobenzenesulfonic acid, trihydrate, 90% (titr.) 2508-19-2
3,4-Dichlorobenzyl Chloride, 98+% 102-47-6
4-Aminobutyraldehyde diethyl acetal, ca. 95%(GC) 6346-09-4
Methyl propiolate, 99% 922-67-8
2-Mercaptobenzimidazole, 98% 583-39-1
(+/-)-2-Amino-1-butanol, 97% 13054-87-0
2-Hydrazinobenzoic Acid Hydrochloride, 97% (Titr.) 52356-01-1
Tetraphenylarsonium Chloride Hydrochloride Dihydrate, 97% 21006-74-6
Resazurin, sodium salt (cert), 85% (uv-vis ) 62758-13-8
4-Hydroxy-3-Nitrobenzaldehyde, 97% 3011-34-5
Tributyl Citrate, 99+% (GC) 77-94-1

Free MSDS Search ( Providing 250,000+ Material Properties )
Chemcas.com| Ads link:todaystock.net