Search   
MSDS 
:
 4-Aminobutyraldehyde diethyl acetal, ca. 95%(GC)
CAS 
:
 6346-09-4
SYNONYMS 
:
 4,4-Diethoxybutylamine
**** SECTION 2 - COMPOSITION, INFORMATION ON INGREDIENTS ****

+----------------+--------------------------------------+----------+-----------+
| CAS# | Chemical Name | % | EINECS# |
|----------------|--------------------------------------|----------|-----------|
| 6346-09-4 |4-Aminobutyraldehyde diethyl acetal | | 228-753-2 |
+----------------+--------------------------------------+----------+-----------+
Hazard Symbols: XI
Risk Phrases: 36/37/38

**** SECTION 3 - HAZARDS IDENTIFICATION ****

EMERGENCY OVERVIEW
Irritating to eyes, respiratory system and skin.

Potential Health Effects
The toxicological properties of this material have not been
investigated. Use appropriate procedures to prevent opportunities
for direct contact with the skin or eyes and to prevent inhalation.

**** SECTION 4 - FIRST AID MEASURES ****

Eyes:
Immediately flush eyes with plenty of water for at least 15 minutes,
occasionally lifting the upper and lower eyelids.
Skin:
Flush skin with plenty of water for at least 15 minutes while
removing contaminated clothing and shoes.
Ingestion:
Do NOT induce vomiting. If conscious and alert, rinse mouth and
drink 2-4 cupfuls of milk or water.
Inhalation:
Remove from exposure and move to fresh air immediately.
Notes to Physician:

**** SECTION 5 - FIRE FIGHTING MEASURES ****

General Information:
As in any fire, wear a self-contained breathing apparatus in
pressure-demand, MSHA/NIOSH (approved or equivalent), and full
protective gear. During a fire, irritating and highly toxic gases
may be generated by thermal decomposition or combustion.
Extinguishing Media:
In case of fire, use water, dry chemical, chemical foam, or
alcohol-resistant foam.

**** SECTION 6 - ACCIDENTAL RELEASE MEASURES ****

General Information: Use proper personal protective equipment as indicated
in Section 8.
Spills/Leaks:
Absorb spill with inert material (e.g. vermiculite, sand or earth),
then place in suitable container. Clean up spills immediately,
observing precautions in the Protective Equipment section.

**** SECTION 7 - HANDLING and STORAGE ****

Handling:
Wash thoroughly after handling. Remove contaminated clothing and
wash before reuse. Avoid contact with eyes, skin, and clothing. Avoid
ingestion and inhalation.
Storage:
Store in a cool, dry place. Keep container closed when not in use.

**** SECTION 8 - EXPOSURE CONTROLS, PERSONAL PROTECTION ****

Engineering Controls:
Use adequate general or local exhaust ventilation to keep airborne
concentrations below the permissible exposure limits. Use process
enclosure, local exhaust ventilation, or other engineering controls
to control airborne levels.
Exposure Limits
CAS# 6346-09-4:


Personal Protective Equipment

Eyes:
Wear safety glasses and chemical goggles if splashing
is possible.
Skin:
Wear appropriate protective gloves and clothing to
prevent skin exposure.
Clothing:
Wear appropriate protective clothing to minimize
contact with skin.
Respirators:
Wear a NIOSH/MSHA or European Standard EN 149
approved full-facepiece airline respirator in the
positive pressure mode with emergency escape
provisions.

**** SECTION 9 - PHYSICAL AND CHEMICAL PROPERTIES ****

Physical State: Liquid
Color: clear, colorless
Odor: None reported.
pH: Not available.
Vapor Pressure: Not available.
Viscosity: Not available.
Boiling Point: 196 deg C @ 760.00mmHg
Freezing/Melting Point: 0 deg C
Autoignition Temperature: Not available.
Flash Point: 62 deg C ( 143.60 deg F)
Explosion Limits, lower: Not available.
Explosion Limits, upper: Not available.
Decomposition Temperature:
Solubility in water: miscible
Specific Gravity/Density: .9090g/cm3
Molecular Formula: H2N(CH2)3CH(OC2H5)2
Molecular Weight: 161.24

**** SECTION 10 - STABILITY AND REACTIVITY ****

Chemical Stability:
Stable under normal temperatures and pressures.
Conditions to Avoid:
Incompatible materials, strong oxidants.
Incompatibilities with Other Materials:
Not available.
Hazardous Decomposition Products:
Nitrogen oxides, carbon monoxide, irritating and toxic fumes and
gases, carbon dioxide, nitrogen.
Hazardous Polymerization: Has not been reported.

**** SECTION 11 - TOXICOLOGICAL INFORMATION ****

RTECS#:
CAS# 6346-09-4 unlisted.
LD50/LC50:
Not available.
Carcinogenicity:
4-Aminobutyraldehyde diethyl acetal -
Not listed by ACGIH, IARC, or NTP.

**** SECTION 12 - ECOLOGICAL INFORMATION ****



**** SECTION 13 - DISPOSAL CONSIDERATIONS ****

Dispose of in a manner consistent with federal, state, and local regulations.

**** SECTION 14 - TRANSPORT INFORMATION ****

IATA
Not regulated as a hazardous material.
IMO
Not regulated as a hazardous material.
RID/ADR
Not regulated as a hazardous material.

**** SECTION 15 - REGULATORY INFORMATION ****

European/International Regulations
European Labeling in Accordance with EC Directives
Hazard Symbols: XI
Risk Phrases:
R 36/37/38 Irritating to eyes, respiratory system
and skin.
Safety Phrases:
S 8 Keep container dry.
S 24/25 Avoid contact with skin and eyes.
WGK (Water Danger/Protection)
CAS# 6346-09-4: No information available.
Canada
None of the chemicals in this product are listed on the DSL/NDSL list.
CAS# 6346-09-4 is not listed on Canada's Ingredient Disclosure List.
US FEDERAL
TSCA
CAS# 6346-09-4 is not listed on the TSCA inventory.
It is for research and development use only.

**** SECTION 16 - ADDITIONAL INFORMATION ****

MSDS Creation Date: 9/02/1997 Revision #2 Date: 3/18/2003

The information above is believed to be accurate and represents the best
information currently available to us. However, we make no warranty of
merchantability or any other warranty, express or implied, with respect to
such information, and we assume no liability resulting from its use. Users
should make their own investigations to determine the suitability of the
information for their particular purposes. In no way shall the company be
liable for any claims, losses, or damages of any third party or for lost
profits or any special, indirect, incidental, consequential or exemplary
damages, howsoever arising, even if the company has been advised of
the possibility of such damages.
--------------------------------------------------------------------------------
--------------------------------------------------------------------------------
Search More   
ALL MSDS PAGES IN THIS GROUP
NAMECAS
1-Iododecane, 99% (GC) 2050-77-3
N-Methylmaleamic Acid, 99+% 6936-48-7
9-Bromophenanthrene, 96% 573-17-1
N-(2-Chloroethyl)acetamide, 98% 7355-58-0
3-Nitrobenzenesulfonyl chloride, 97% 121-51-7
1,3-Diiodopropane, 99% 627-31-6
Ammonium Sulfobetaine - 15 % Solution in Water 0-00-1
2-Amino-3-picoline, 96% 1603-40-3
2-Amino-4-Phenyl-5-N-Tetradecylthiazole, 98% 64415-14-1
3-Endo-Aminobicyclo??2.2.1??Hept-5-ene-2-Endo-Carboxamide, 99+% 105786-38-7
Palladium on activated carbon (3% pd)
Triphenylethylene, 98+% 58-72-0
Zirconyl(IV)-nitrate hydrate 14985-18-3
3-Hydrazinoquinoline dihydrochloride, 96% (titr.) 61621-35-0
Vinyl crotonate, 98% 14861-06-4
Cyclopropyl methyl carbinol, 96% 765-42-4
8,8'-Quinolyl Disulfide 1160-28-7
5-(Hydroxymethyl)Furfural, 98% 67-47-0
Beta-D-Ribofuranose 1-Acetate 2,3,5-Tri-Benzoate, 99+ % 6972-71-0
2,6-Dichloropurine, 97% 5451-40-1
9-Isopropylcarbazole 1484-09-9
alpha-Methylene-gamma-butyrolactone 547-65-9
Perfluoro-Compound FC-43 311-89-7
Hexanal, 96% 66-25-1
1-Chloro-4-Iodobenzene, 99% 637-87-6
(2R,3S)-(-)-2-Amino-3-hydroxy-4-methylpentanoic acid, 99.5+% 87421-23-6
5-Bromofuroic acid 585-70-6
Paraformaldehyde-D, 99+ atom% D 43094-80-0
Palladium(II) Acetate 3375-31-3
N-Glycyl-L-leucine 869-19-2
2-Aminopyridine, 99% (Titr.) 504-29-0
Terephthaldicarboxaldehyde, 98% 623-26-7
4-Hydroxy-3-methyl-2-butanone, tech. ca. 85% 3393-64-4
2-Chloroanthraquinone 131-09-9
2-Chloroethanol, 99+% 107-07-3
Benzilic acid, 99+% 76-93-7
trans-Diethyl caronate 67945-22-6
Quinine monohydrochloride dihydrate, 99% 6119-47-7
Ethyl 4-Chloroacetoacetate, 98% 638-07-3
2,4,6-Trinitrobenzenesulfonic acid, trihydrate, 90% (titr.) 2508-19-2
3,4-Dichlorobenzyl Chloride, 98+% 102-47-6
4-Aminobutyraldehyde diethyl acetal, ca. 95%(GC) 6346-09-4
Methyl propiolate, 99% 922-67-8
2-Mercaptobenzimidazole, 98% 583-39-1
(+/-)-2-Amino-1-butanol, 97% 13054-87-0
2-Hydrazinobenzoic Acid Hydrochloride, 97% (Titr.) 52356-01-1
Tetraphenylarsonium Chloride Hydrochloride Dihydrate, 97% 21006-74-6
Resazurin, sodium salt (cert), 85% (uv-vis ) 62758-13-8
4-Hydroxy-3-Nitrobenzaldehyde, 97% 3011-34-5
Tributyl Citrate, 99+% (GC) 77-94-1

Free MSDS Search ( Providing 250,000+ Material Properties )
Chemcas.com| Ads link:todaystock.net