Search   
MSDS 
:
 Pumice
CAS 
:
 1332-09-8
SYNONYMS 
:
 None
**** SECTION 2 - COMPOSITION, INFORMATION ON INGREDIENTS ****

+----------------+--------------------------------------+----------+-----------+
| CAS# | Chemical Name | % | EINECS# |
|----------------|--------------------------------------|----------|-----------|
| 1332-09-8 |Pumice | 100.0% | unlisted |
+----------------+--------------------------------------+----------+-----------+
Hazard Symbols: None Listed.
Risk Phrases: None Listed.

**** SECTION 3 - HAZARDS IDENTIFICATION ****

EMERGENCY OVERVIEW
Not available.

Potential Health Effects
Eye:
Dust may cause mechanical irritation.
Skin:
Dust may cause mechanical irritation.
Ingestion:
Expected to be a low ingestion hazard.
Inhalation:
Low hazard for usual industrial handling.
Chronic:
No information found.

**** SECTION 4 - FIRST AID MEASURES ****

Eyes:
Get medical aid. Do NOT allow victim to rub eyes or keep eyes
closed. Gently lift eyelids and flush continuously with water.
Skin:
Get medical aid. Flush skin with plenty of soap and water.
Ingestion:
If victim is conscious and alert, give 2-4 cupfuls of milk or water.
Get medical aid if irritation or symptoms occur.
Inhalation:
Remove from exposure and move to fresh air immediately. If not
breathing, give artificial respiration. If breathing is difficult,
give oxygen. Get medical aid if cough or other symptoms appear.
Notes to Physician:

**** SECTION 5 - FIRE FIGHTING MEASURES ****

General Information:
As in any fire, wear a self-contained breathing apparatus in
pressure-demand, MSHA/NIOSH (approved or equivalent), and full
protective gear.
Extinguishing Media:
Use water fog, dry chemical, carbon dioxide, or regular foam.

**** SECTION 6 - ACCIDENTAL RELEASE MEASURES ****

General Information: Use proper personal protective equipment as indicated
in Section 8.
Spills/Leaks:
Vacuum or sweep up material and place into a suitable disposal
container.

**** SECTION 7 - HANDLING and STORAGE ****

Handling:
Use with adequate ventilation.
Storage:
Store in a dry area.

**** SECTION 8 - EXPOSURE CONTROLS, PERSONAL PROTECTION ****

Engineering Controls:
Good general ventilation should be sufficient to control airborne
levels.
Exposure Limits
CAS# 1332-09-8:


Personal Protective Equipment

Eyes:
Wear appropriate protective eyeglasses or chemical
safety goggles as described by OSHA's eye and face
protection regulations in 29 CFR 1910.133 or European
Standard EN166.
Skin:
Protective garments not normally required.
Clothing:
Protective garments not normally required.
Respirators:
Follow the OSHA respirator regulations found in 29
CFR 1910.134 or European Standard EN 149. Use a
NIOSH/MSHA or European Standard EN 149 approved
respirator if exposure limits are exceeded or if
irritation or other symptoms are experienced.

**** SECTION 9 - PHYSICAL AND CHEMICAL PROPERTIES ****

Physical State: Solid
Color: grey
Odor: none reported
pH: Not available.
Vapor Pressure: Not available.
Viscosity: Not available.
Boiling Point: Not available.
Freezing/Melting Point: Not available.
Autoignition Temperature: Not available.
Flash Point: Not available.
Explosion Limits, lower: Not available.
Explosion Limits, upper: Not available.
Decomposition Temperature:
Solubility in water:
Specific Gravity/Density:
Molecular Formula: C5H5N
Molecular Weight: 79.0417

**** SECTION 10 - STABILITY AND REACTIVITY ****

Chemical Stability:
Stable under normal temperatures and pressures.
Conditions to Avoid:
Strong oxidants.
Incompatibilities with Other Materials:
None reported, however, may be incompatible with strong oxidizers.
Hazardous Decomposition Products:
Carbon monoxide, carbon dioxide.
Hazardous Polymerization: Has not been reported

**** SECTION 11 - TOXICOLOGICAL INFORMATION ****

RTECS#:
CAS# 1332-09-8 unlisted.
LD50/LC50:
Not available.
Carcinogenicity:
Pumice -
Not listed by ACGIH, IARC, or NTP.

**** SECTION 12 - ECOLOGICAL INFORMATION ****



**** SECTION 13 - DISPOSAL CONSIDERATIONS ****

Products which are considered hazardous for supply are classified as Special
Waste and the disposal of such chemicals is covered by regulations which may
vary according to location. Contact a specialist disposal company or the local
waste regulator for advice. Empty containers must be decontaminated before
returning for recycling.

**** SECTION 14 - TRANSPORT INFORMATION ****

IATA
Not regulated as a hazardous material.
IMO
Not regulated as a hazardous material.
RID/ADR
Not regulated as a hazardous material.

**** SECTION 15 - REGULATORY INFORMATION ****

European/International Regulations
European Labeling in Accordance with EC Directives
Hazard Symbols: Not available.
Risk Phrases:
Safety Phrases:
WGK (Water Danger/Protection)
CAS# 1332-09-8: No information available.
Canada
CAS# 1332-09-8 is listed on Canada's DSL List.
CAS# 1332-09-8 is not listed on Canada's Ingredient Disclosure List.
US FEDERAL
TSCA
CAS# 1332-09-8 is listed on the TSCA inventory.

**** SECTION 16 - ADDITIONAL INFORMATION ****

MSDS Creation Date: 12/12/1997 Revision #3 Date: 3/18/2003

The information above is believed to be accurate and represents the best
information currently available to us. However, we make no warranty of
merchantability or any other warranty, express or implied, with respect to
such information, and we assume no liability resulting from its use. Users
should make their own investigations to determine the suitability of the
information for their particular purposes. In no way shall the company be
liable for any claims, losses, or damages of any third party or for lost
profits or any special, indirect, incidental, consequential or exemplary
damages, howsoever arising, even if the company has been advised of
the possibility of such damages.
--------------------------------------------------------------------------------
--------------------------------------------------------------------------------
Search More   
ALL MSDS PAGES IN THIS GROUP
NAMECAS
Benzyltriphenylphosphonium bromide 1449-46-3
Sodium Hydroxide 0.1N Solution 1310-73-2
Sodium Hydroxide 0.5 N 1310-73-2
Sodium Hydroxide 1N 1310-73-2
Lithium Standard 90-43-7
Dilutor Cleaning Solution 90-43-7
Calix[4]-bis-2,3-naphtho-crown-6 0-00-0
Calix[4]-bis-1,2-benzo-crown-6
Calix[4]-bis-crown-6 157769-14-7
Broth (All Types-Both Liquid and Powder)
Pumice 1332-09-8
Factor V Abnormal Control Level 1
Barium manganate(vi), 95% 7787-35-1
Factor II Deficient Plasma
Factor I Deficient Plasma
Factor XII Deficient Plasma
nTris(trimethylsilyl)silane, 96% (gc) 1873-77-4
Beta-(2-Thienyl)-Acrylic Acid, 98% 15690-25-2
Factor IX Abnormal Control Level 4
Factor IX Abnormal Control Level 3
Factor IX Abnormal Control Level 2
Factor IX Abnormal Control Level 1
Methyl 4-chlorobutyrate, 98+% 3153-37-5
Factor VIII Abnormal Control Level 4
Factor VIII Abnormal Control Level 3
Adipoyl chloride 111-50-2
1,12-Dibromododecane, 96 % 3344-70-5
Allyl Bromide 106-95-6
Alizarin Red S 130-22-3
Alginic acid 9005-38-3
DL-Isocitric Acid, Monopotassium Salt, 99%
Alizarin 72-48-0
2-Bromobenzyl alcohol, 98% 18982-54-2
DL-Alanine 302-72-7
Albumin, Bovine (Fraction V) 9048-46-8
Kaolin Washed with Acid, Light 1332-58-7
Adenosine-5-Triphosphoric Acid Disodium Salt 987-65-5
0.02M (0.1N) Potassium Permanganate 7722-64-7
Acrylaldehyde 107-02-8
Acridine Orange 65-61-2
Zirconyl Chloride Octahydrate 7699-43-6
Zirconium Dioxide 1314-23-4
1,5-Diiodopentane, 98% 628-76-2
Buffer Solution pH 2.0 56-40-6
Sodium tetra-ethylborate 2679-89-2
2-(Methylamino)Isobutyric Acid, 99% 2566-34-9
Buffer Solution pH 3.0 877-24-7
Acetyl bromide 506-96-7
Buffer Solution pH 4.0 877-24-7
1-Acetoxy-2-Methoxyethane 110-49-6

Free MSDS Search ( Providing 250,000+ Material Properties )
Chemcas.com| Ads link:todaystock.net