Search   
MSDS 
:
 Acetyl bromide
CAS 
:
 506-96-7
SYNONYMS 
:
 Ethanoyl bromide
**** SECTION 2 - COMPOSITION, INFORMATION ON INGREDIENTS ****

+----------------+--------------------------------------+----------+-----------+
| CAS# | Chemical Name | % | EINECS# |
|----------------|--------------------------------------|----------|-----------|
| 506-96-7 |Acetyl bromide | 100 | 208-061-7 |
+----------------+--------------------------------------+----------+-----------+
Hazard Symbols: T C
Risk Phrases: 14 25 34

**** SECTION 3 - HAZARDS IDENTIFICATION ****

EMERGENCY OVERVIEW
Reacts violently with water. Toxic if swallowed. Causes
burns.Corrosive.Water-reactive.Air sensitive.

Potential Health Effects
Eye:
Causes severe eye burns. May result in corneal injury.
Skin:
Contact with liquid is corrosive and causes severe burns and
ulceration.
Ingestion:
May be fatal if swallowed. May cause irritation of the digestive
tract and possible burns.
Inhalation:
Irritation may lead to chemical pneumonitis and pulmonary edema. May
cause burns to the respiratory tract.
Chronic:
No information found.

**** SECTION 4 - FIRST AID MEASURES ****

Eyes:
Immediately flush eyes with plenty of water for at least 15 minutes,
occasionally lifting the upper and lower eyelids. Get medical aid
immediately. Do NOT allow victim to rub eyes or keep eyes closed.
Skin:
Get medical aid immediately. Immediately flush skin with plenty of
water for at least 15 minutes while removing contaminated clothing
and shoes.
Ingestion:
Do not induce vomiting. If victim is conscious and alert, give 2-4
cupfuls of milk or water. Never give anything by mouth to an
unconscious person. Get medical aid immediately.
Inhalation:
Get medical aid immediately. Remove from exposure and move to fresh
air immediately. If breathing is difficult, give oxygen. Do NOT use
mouth-to-mouth resuscitation. If breathing has ceased apply
artificial respiration using oxygen and a suitable mechanical device
such as a bag and a mask.
Notes to Physician:

**** SECTION 5 - FIRE FIGHTING MEASURES ****

General Information:
As in any fire, wear a self-contained breathing apparatus in
pressure-demand, MSHA/NIOSH (approved or equivalent), and full
protective gear. Vapors can travel to a source of ignition and flash
back. During a fire, irritating and highly toxic gases may be
generated by thermal decomposition or combustion. Water Reactive.
Material will react with water and may release a flammable and/or
toxic gas. Use water spray to keep fire-exposed containers cool.
Vapors may be heavier than air. They can spread along the ground
and collect in low or confined areas. Contact with metals may evolve
flammable hydrogen gas. Vapors may form an explosive mixture with
air. Containers may explode when heated or if contaminated with
water. Substance will react with water (some violently) releasing
flammable, toxic, or corrosive gases and runoff.
Extinguishing Media:
Do NOT use water directly on fire. Use water spray to cool
fire-exposed containers. Use carbon dioxide or dry chemical. Do NOT
get water inside containers. Do NOT use straight streams of water.

**** SECTION 6 - ACCIDENTAL RELEASE MEASURES ****

General Information: Use proper personal protective equipment as indicated
in Section 8.
Spills/Leaks:
Absorb spill with inert material (e.g. vermiculite, sand or earth),
then place in suitable container. Neutralize spill with sodium
bicarbonate. Use water spray to disperse the gas/vapor. Remove all
sources of ignition. Provide ventilation. Do not get water on
spilled substances or inside containers.

**** SECTION 7 - HANDLING and STORAGE ****

Handling:
Wash thoroughly after handling. Remove contaminated clothing and
wash before reuse. Use with adequate ventilation. Do not allow water
to get into the container because of violent reaction. Do not get in
eyes, on skin, or on clothing. Keep container tightly closed. Do not
ingest or inhale.
Storage:
Keep container closed when not in use. Store in a tightly closed
container. Store in a cool, dry, well-ventilated area away from
incompatible substances. Keep away from water.

**** SECTION 8 - EXPOSURE CONTROLS, PERSONAL PROTECTION ****

Engineering Controls:
Use adequate ventilation to keep airborne concentrations low.
Exposure Limits
CAS# 506-96-7:


Personal Protective Equipment

Eyes:
Wear appropriate protective eyeglasses or chemical
safety goggles as described by OSHA's eye and face
protection regulations in 29 CFR 1910.133 or European
Standard EN166.
Skin:
Wear appropriate protective gloves to prevent skin
exposure.
Clothing:
Wear appropriate protective clothing to prevent skin
exposure.
Respirators:
Follow the OSHA respirator regulations found in 29
CFR 1910.134 or European Standard EN 149. Use a
NIOSH/MSHA or European Standard EN 149 approved
respirator if exposure limits are exceeded or if
irritation or other symptoms are experienced.

**** SECTION 9 - PHYSICAL AND CHEMICAL PROPERTIES ****

Physical State: Liquid
Color: colorless
Odor: Pungent odor.
pH: Not available.
Vapor Pressure: Not available.
Viscosity: Not available.
Boiling Point: 80 deg C
Freezing/Melting Point: -96.5 deg C
Autoignition Temperature: Not applicable.
Flash Point: Not applicable.
Explosion Limits, lower: Not available.
Explosion Limits, upper: Not available.
Decomposition Temperature: Not available.
Solubility in water: Soluble.
Specific Gravity/Density: 1.7 (Water=1)
Molecular Formula: C2H3BrO
Molecular Weight: 122.9244

**** SECTION 10 - STABILITY AND REACTIVITY ****

Chemical Stability:
Stable under normal temperatures and pressures. Substance undergoes
color change upon exposure to air.
Conditions to Avoid:
Incompatible materials, contact with water.
Incompatibilities with Other Materials:
Strong oxidizing agents, strong bases, alcohols, water and steam.
Hazardous Decomposition Products:
Carbon monoxide, irritating and toxic fumes and gases, carbon
dioxide, hydrogen bromide.
Hazardous Polymerization: Has not been reported.

**** SECTION 11 - TOXICOLOGICAL INFORMATION ****

RTECS#:
CAS# 506-96-7: AO5955000
LD50/LC50:
Not available.
Oral, rats: LD50 = <50 mg/kg
Carcinogenicity:
Acetyl bromide -
Not listed by ACGIH, IARC, or NTP.
Other:
See actual entry in RTECS for complete information.

**** SECTION 12 - ECOLOGICAL INFORMATION ****



**** SECTION 13 - DISPOSAL CONSIDERATIONS ****

Products which are considered hazardous for supply are classified as Special
Waste and the disposal of such chemicals is covered by regulations which may
vary according to location. Contact a specialist disposal company or the local
waste regulator for advice. Empty containers must be decontaminated before
returning for recycling.

**** SECTION 14 - TRANSPORT INFORMATION ****

IATA
No information available.
IMO
No information available.
RID/ADR
No information available.
USA RQ: CAS# 506-96-7: 5000 lb final RQ; 2270 kg final RQ

**** SECTION 15 - REGULATORY INFORMATION ****

European/International Regulations
European Labeling in Accordance with EC Directives
Hazard Symbols: T C
Risk Phrases:
R 14 Reacts violently with water.
R 25 Toxic if swallowed.
R 34 Causes burns.
Safety Phrases:
S 9 Keep container in a well-ventilated place.
S 23 Do not inhale gas/fumes/vapour/spray.
S 25 Avoid contact with eyes.
S 26 In case of contact with eyes, rinse immediately
with plenty of water and seek medical advice.
S 36/37/39 Wear suitable protective clothing, gloves
and eye/face protection.
S 37/39 Wear suitable gloves and eye/face
protection.
S 45 In case of accident or if you feel unwell, seek
medical advice immediately (show the label where
possible).
WGK (Water Danger/Protection)
CAS# 506-96-7: No information available.
Canada
CAS# 506-96-7 is listed on Canada's NDSL List.
CAS# 506-96-7 is listed on Canada's Ingredient Disclosure List.
US FEDERAL
TSCA
CAS# 506-96-7 is listed on the TSCA inventory.

**** SECTION 16 - ADDITIONAL INFORMATION ****

MSDS Creation Date: 6/08/1998 Revision #3 Date: 10/07/2003

The information above is believed to be accurate and represents the best
information currently available to us. However, we make no warranty of
merchantability or any other warranty, express or implied, with respect to
such information, and we assume no liability resulting from its use. Users
should make their own investigations to determine the suitability of the
information for their particular purposes. In no way shall the company be
liable for any claims, losses, or damages of any third party or for lost
profits or any special, indirect, incidental, consequential or exemplary
damages, howsoever arising, even if the company has been advised of
the possibility of such damages.
--------------------------------------------------------------------------------
--------------------------------------------------------------------------------
Search More   
ALL MSDS PAGES IN THIS GROUP
NAMECAS
Benzyltriphenylphosphonium bromide 1449-46-3
Sodium Hydroxide 0.1N Solution 1310-73-2
Sodium Hydroxide 0.5 N 1310-73-2
Sodium Hydroxide 1N 1310-73-2
Lithium Standard 90-43-7
Dilutor Cleaning Solution 90-43-7
Calix[4]-bis-2,3-naphtho-crown-6 0-00-0
Calix[4]-bis-1,2-benzo-crown-6
Calix[4]-bis-crown-6 157769-14-7
Broth (All Types-Both Liquid and Powder)
Pumice 1332-09-8
Factor V Abnormal Control Level 1
Barium manganate(vi), 95% 7787-35-1
Factor II Deficient Plasma
Factor I Deficient Plasma
Factor XII Deficient Plasma
nTris(trimethylsilyl)silane, 96% (gc) 1873-77-4
Beta-(2-Thienyl)-Acrylic Acid, 98% 15690-25-2
Factor IX Abnormal Control Level 4
Factor IX Abnormal Control Level 3
Factor IX Abnormal Control Level 2
Factor IX Abnormal Control Level 1
Methyl 4-chlorobutyrate, 98+% 3153-37-5
Factor VIII Abnormal Control Level 4
Factor VIII Abnormal Control Level 3
Adipoyl chloride 111-50-2
1,12-Dibromododecane, 96 % 3344-70-5
Allyl Bromide 106-95-6
Alizarin Red S 130-22-3
Alginic acid 9005-38-3
DL-Isocitric Acid, Monopotassium Salt, 99%
Alizarin 72-48-0
2-Bromobenzyl alcohol, 98% 18982-54-2
DL-Alanine 302-72-7
Albumin, Bovine (Fraction V) 9048-46-8
Kaolin Washed with Acid, Light 1332-58-7
Adenosine-5-Triphosphoric Acid Disodium Salt 987-65-5
0.02M (0.1N) Potassium Permanganate 7722-64-7
Acrylaldehyde 107-02-8
Acridine Orange 65-61-2
Zirconyl Chloride Octahydrate 7699-43-6
Zirconium Dioxide 1314-23-4
1,5-Diiodopentane, 98% 628-76-2
Buffer Solution pH 2.0 56-40-6
Sodium tetra-ethylborate 2679-89-2
2-(Methylamino)Isobutyric Acid, 99% 2566-34-9
Buffer Solution pH 3.0 877-24-7
Acetyl bromide 506-96-7
Buffer Solution pH 4.0 877-24-7
1-Acetoxy-2-Methoxyethane 110-49-6

Free MSDS Search ( Providing 250,000+ Material Properties )
Chemcas.com| Ads link:todaystock.net