Search   
MSDS 
:
 Benzyltriphenylphosphonium bromide
CAS 
:
 1449-46-3
SYNONYMS 
:
 None
**** SECTION 2 - COMPOSITION, INFORMATION ON INGREDIENTS ****

+----------------+--------------------------------------+----------+-----------+
| CAS# | Chemical Name | % | EINECS# |
|----------------|--------------------------------------|----------|-----------|
| 1449-46-3 |Benzyltriphenylphosphonium bromide | 100 | 215-908-4 |
+----------------+--------------------------------------+----------+-----------+
Hazard Symbols: XN
Risk Phrases: 20/21/22

**** SECTION 3 - HAZARDS IDENTIFICATION ****

EMERGENCY OVERVIEW
Harmful by inhalation, in contact with skin and if swallowed.The
toxicological properties of this material have not been fully
investigated.

Potential Health Effects
Eye:
May cause eye irritation.
Skin:
May cause skin irritation. May be harmful if absorbed through the
skin.
Ingestion:
May cause irritation of the digestive tract. The toxicological
properties of this substance have not been fully investigated. May be
harmful if swallowed.
Inhalation:
May cause respiratory tract irritation. The toxicological properties
of this substance have not been fully investigated. May be harmful if
inhaled.
Chronic:
No information found.

**** SECTION 4 - FIRST AID MEASURES ****

Eyes:
Flush eyes with plenty of water for at least 15 minutes,
occasionally lifting the upper and lower eyelids. Get medical aid.
Skin:
Get medical aid. Flush skin with plenty of water for at least 15
minutes while removing contaminated clothing and shoes. Wash clothing
before reuse.
Ingestion:
If victim is conscious and alert, give 2-4 cupfuls of milk or water.
Get medical aid. Wash mouth out with water.
Inhalation:
Remove from exposure and move to fresh air immediately. If not
breathing, give artificial respiration. If breathing is difficult,
give oxygen. Get medical aid.
Notes to Physician:
Antidote:
None reported.

**** SECTION 5 - FIRE FIGHTING MEASURES ****

General Information:
As in any fire, wear a self-contained breathing apparatus in
pressure-demand, MSHA/NIOSH (approved or equivalent), and full
protective gear. This material in sufficient quantity and reduced
particle size is capable of creating a dust explosion.
Extinguishing Media:
Use carbon dioxide or dry chemical. DO NOT USE WATER! Do NOT get
water inside containers.

**** SECTION 6 - ACCIDENTAL RELEASE MEASURES ****

General Information: Use proper personal protective equipment as indicated
in Section 8.
Spills/Leaks:
Vacuum or sweep up material and place into a suitable disposal
container. Avoid generating dusty conditions. Provide ventilation. Do
not get water inside containers.

**** SECTION 7 - HANDLING and STORAGE ****

Handling:
Wash thoroughly after handling. Use with adequate ventilation.
Minimize dust generation and accumulation. Avoid contact with eyes,
skin, and clothing. Avoid ingestion and inhalation. Do not allow
contact with water. Keep from contact with moist air and steam.
Storage:
Store in a tightly closed container. Store in a cool, dry,
well-ventilated area away from incompatible substances. Store
protected from moisture.

**** SECTION 8 - EXPOSURE CONTROLS, PERSONAL PROTECTION ****

Engineering Controls:
Use adequate ventilation to keep airborne concentrations low.
Exposure Limits
CAS# 1449-46-3:


Personal Protective Equipment

Eyes:
Wear appropriate protective eyeglasses or chemical
safety goggles as described by OSHA's eye and face
protection regulations in 29 CFR 1910.133 or European
Standard EN166.
Skin:
Wear appropriate protective gloves to prevent skin
exposure.
Clothing:
Wear appropriate protective clothing to prevent skin
exposure.
Respirators:
Follow the OSHA respirator regulations found in 29
CFR 1910.134 or European Standard EN 149. Use a
NIOSH/MSHA or European Standard EN 149 approved
respirator if exposure limits are exceeded or if
irritation or other symptoms are experienced.

**** SECTION 9 - PHYSICAL AND CHEMICAL PROPERTIES ****

Physical State: Solid
Color: off-white
Odor: Not available.
pH: Not available.
Vapor Pressure: Not available.
Viscosity: Not available.
Boiling Point: Not available.
Freezing/Melting Point: 295 deg C
Autoignition Temperature: Not available.
Flash Point: Not available.
Explosion Limits, lower: Not available.
Explosion Limits, upper: Not available.
Decomposition Temperature:
Solubility in water: Reacts.
Specific Gravity/Density:
Molecular Formula: C25H22BrP
Molecular Weight: 433.32

**** SECTION 10 - STABILITY AND REACTIVITY ****

Chemical Stability:
Stable.
Conditions to Avoid:
Dust generation, excess heat, exposure to moist air or water.
Incompatibilities with Other Materials:
Strong oxidizing agents, water.
Hazardous Decomposition Products:
Phosphine, carbon monoxide, oxides of phosphorus, carbon dioxide,
hydrogen bromide.
Hazardous Polymerization: Will not occur.

**** SECTION 11 - TOXICOLOGICAL INFORMATION ****

RTECS#:
CAS# 1449-46-3 unlisted.
LD50/LC50:
Not available.
Carcinogenicity:
Benzyltriphenylphosphonium bromide -
Not listed by ACGIH, IARC, or NTP.

**** SECTION 12 - ECOLOGICAL INFORMATION ****

Other
No information available.

**** SECTION 13 - DISPOSAL CONSIDERATIONS ****

Dispose of in a manner consistent with federal, state, and local regulations.

**** SECTION 14 - TRANSPORT INFORMATION ****

IATA
Shipping Name: Not regulated.
Hazard Class:
UN Number:
Packing Group:
IMO
Shipping Name: Not regulated.
Hazard Class:
UN Number:
Packing Group:
RID/ADR
Shipping Name: Not regulated.
Hazard Class:
UN Number:
Packing group:

**** SECTION 15 - REGULATORY INFORMATION ****

European/International Regulations
European Labeling in Accordance with EC Directives
Hazard Symbols: XN
Risk Phrases:
R 20/21/22 Harmful by inhalation, in contact with
skin and if swallowed.
Safety Phrases:
S 36/37 Wear suitable protective clothing and
gloves.
WGK (Water Danger/Protection)
CAS# 1449-46-3: No information available.
Canada
None of the chemicals in this product are listed on the DSL/NDSL list.
CAS# 1449-46-3 is not listed on Canada's Ingredient Disclosure List.
US FEDERAL
TSCA
CAS# 1449-46-3 is not listed on the TSCA inventory.
It is for research and development use only.

**** SECTION 16 - ADDITIONAL INFORMATION ****

MSDS Creation Date: 4/27/1999 Revision #3 Date: 5/15/2003

The information above is believed to be accurate and represents the best
information currently available to us. However, we make no warranty of
merchantability or any other warranty, express or implied, with respect to
such information, and we assume no liability resulting from its use. Users
should make their own investigations to determine the suitability of the
information for their particular purposes. In no way shall the company be
liable for any claims, losses, or damages of any third party or for lost
profits or any special, indirect, incidental, consequential or exemplary
damages, howsoever arising, even if the company has been advised of
the possibility of such damages.
--------------------------------------------------------------------------------
--------------------------------------------------------------------------------
Search More   
ALL MSDS PAGES IN THIS GROUP
NAMECAS
Benzyltriphenylphosphonium bromide 1449-46-3
Sodium Hydroxide 0.1N Solution 1310-73-2
Sodium Hydroxide 0.5 N 1310-73-2
Sodium Hydroxide 1N 1310-73-2
Lithium Standard 90-43-7
Dilutor Cleaning Solution 90-43-7
Calix[4]-bis-2,3-naphtho-crown-6 0-00-0
Calix[4]-bis-1,2-benzo-crown-6
Calix[4]-bis-crown-6 157769-14-7
Broth (All Types-Both Liquid and Powder)
Pumice 1332-09-8
Factor V Abnormal Control Level 1
Barium manganate(vi), 95% 7787-35-1
Factor II Deficient Plasma
Factor I Deficient Plasma
Factor XII Deficient Plasma
nTris(trimethylsilyl)silane, 96% (gc) 1873-77-4
Beta-(2-Thienyl)-Acrylic Acid, 98% 15690-25-2
Factor IX Abnormal Control Level 4
Factor IX Abnormal Control Level 3
Factor IX Abnormal Control Level 2
Factor IX Abnormal Control Level 1
Methyl 4-chlorobutyrate, 98+% 3153-37-5
Factor VIII Abnormal Control Level 4
Factor VIII Abnormal Control Level 3
Adipoyl chloride 111-50-2
1,12-Dibromododecane, 96 % 3344-70-5
Allyl Bromide 106-95-6
Alizarin Red S 130-22-3
Alginic acid 9005-38-3
DL-Isocitric Acid, Monopotassium Salt, 99%
Alizarin 72-48-0
2-Bromobenzyl alcohol, 98% 18982-54-2
DL-Alanine 302-72-7
Albumin, Bovine (Fraction V) 9048-46-8
Kaolin Washed with Acid, Light 1332-58-7
Adenosine-5-Triphosphoric Acid Disodium Salt 987-65-5
0.02M (0.1N) Potassium Permanganate 7722-64-7
Acrylaldehyde 107-02-8
Acridine Orange 65-61-2
Zirconyl Chloride Octahydrate 7699-43-6
Zirconium Dioxide 1314-23-4
1,5-Diiodopentane, 98% 628-76-2
Buffer Solution pH 2.0 56-40-6
Sodium tetra-ethylborate 2679-89-2
2-(Methylamino)Isobutyric Acid, 99% 2566-34-9
Buffer Solution pH 3.0 877-24-7
Acetyl bromide 506-96-7
Buffer Solution pH 4.0 877-24-7
1-Acetoxy-2-Methoxyethane 110-49-6

Free MSDS Search ( Providing 250,000+ Material Properties )
Chemcas.com| Ads link:todaystock.net