Search   
MSDS 
:
 1-Pentadecene, 98%
CAS 
:
 13360-61-7
SYNONYMS 
:
 Pentadec-1-ene
**** SECTION 2 - COMPOSITION, INFORMATION ON INGREDIENTS ****

+----------------+--------------------------------------+----------+-----------+
| CAS# | Chemical Name | % | EINECS# |
|----------------|--------------------------------------|----------|-----------|
| 13360-61-7 |1-Pentadecene | 98 | 236-414-5 |
+----------------+--------------------------------------+----------+-----------+
Hazard Symbols: None Listed.
Risk Phrases: None Listed.

**** SECTION 3 - HAZARDS IDENTIFICATION ****

EMERGENCY OVERVIEW
The toxicological properties of this material have not been fully
investigated.

Potential Health Effects
Eye:
May cause eye irritation.
Skin:
May cause skin irritation.
Ingestion:
May cause irritation of the digestive tract. The toxicological
properties of this substance have not been fully investigated.
Inhalation:
May cause respiratory tract irritation. The toxicological properties
of this substance have not been fully investigated.
Chronic:
No information found.

**** SECTION 4 - FIRST AID MEASURES ****

Eyes:
Immediately flush eyes with plenty of water for at least 15 minutes,
occasionally lifting the upper and lower eyelids. Get medical aid.
Skin:
Get medical aid. Flush skin with plenty of water for at least 15
minutes while removing contaminated clothing and shoes. Wash clothing
before reuse.
Ingestion:
Never give anything by mouth to an unconscious person. Get medical
aid. Do NOT induce vomiting. If conscious and alert, rinse mouth and
drink 2-4 cupfuls of milk or water.
Inhalation:
Remove from exposure and move to fresh air immediately. If not
breathing, give artificial respiration. If breathing is difficult,
give oxygen. Get medical aid.
Notes to Physician:

**** SECTION 5 - FIRE FIGHTING MEASURES ****

General Information:
As in any fire, wear a self-contained breathing apparatus in
pressure-demand, MSHA/NIOSH (approved or equivalent), and full
protective gear. During a fire, irritating and highly toxic gases
may be generated by thermal decomposition or combustion. Vapors may
be heavier than air. They can spread along the ground and collect
in low or confined areas.
Extinguishing Media:
Water may be ineffective. Use water spray, dry chemical, carbon
dioxide, or appropriate foam.

**** SECTION 6 - ACCIDENTAL RELEASE MEASURES ****

General Information: Use proper personal protective equipment as indicated
in Section 8.
Spills/Leaks:
Absorb spill using an absorbent, non-combustible material such as
earth, sand, or vermiculite. Do not use combustible materials such
as sawdust. Provide ventilation.

**** SECTION 7 - HANDLING and STORAGE ****

Handling:
Wash thoroughly after handling. Remove contaminated clothing and
wash before reuse. Use with adequate ventilation. Avoid contact with
eyes, skin, and clothing. Avoid ingestion and inhalation.
Storage:
Store in a tightly closed container. Store in a cool, dry,
well-ventilated area away from incompatible substances.

**** SECTION 8 - EXPOSURE CONTROLS, PERSONAL PROTECTION ****

Engineering Controls:
Facilities storing or utilizing this material should be equipped
with an eyewash facility and a safety shower. Use adequate
ventilation to keep airborne concentrations low.
Exposure Limits
CAS# 13360-61-7:


Personal Protective Equipment

Eyes:
Wear appropriate protective eyeglasses or chemical
safety goggles as described by OSHA's eye and face
protection regulations in 29 CFR 1910.133 or European
Standard EN166.
Skin:
Wear appropriate protective gloves to prevent skin
exposure.
Clothing:
Wear appropriate protective clothing to prevent skin
exposure.
Respirators:
A respiratory protection program that meets OSHA's 29
CFR 1910.134 and ANSI Z88.2 requirements or European
Standard EN 149 must be followed whenever workplace
conditions warrant respirator use.

**** SECTION 9 - PHYSICAL AND CHEMICAL PROPERTIES ****

Physical State: Clear liquid
Color: clear very light yellow
Odor: None reported.
pH: Not available.
Vapor Pressure: Not available.
Viscosity: Not available.
Boiling Point: 268.0 - 269.0 deg C @ 760.00m
Freezing/Melting Point: -4 deg C
Autoignition Temperature: Not applicable.
Flash Point: > 112 deg C (> 233.60 deg F)
Explosion Limits, lower: Not available.
Explosion Limits, upper: Not available.
Decomposition Temperature: Not available.
Solubility in water: Not available.
Specific Gravity/Density: .7750g/cm3
Molecular Formula: C15H30
Molecular Weight: 210.40

**** SECTION 10 - STABILITY AND REACTIVITY ****

Chemical Stability:
Stable under normal temperatures and pressures.
Conditions to Avoid:
Incompatible materials, strong oxidants.
Incompatibilities with Other Materials:
Oxidizing agents.
Hazardous Decomposition Products:
Carbon monoxide, irritating and toxic fumes and gases, carbon
dioxide.
Hazardous Polymerization: Has not been reported.

**** SECTION 11 - TOXICOLOGICAL INFORMATION ****

RTECS#:
CAS# 13360-61-7 unlisted.
LD50/LC50:
Not available.
Carcinogenicity:
1-Pentadecene -
Not listed by ACGIH, IARC, or NTP.

**** SECTION 12 - ECOLOGICAL INFORMATION ****



**** SECTION 13 - DISPOSAL CONSIDERATIONS ****

Dispose of in a manner consistent with federal, state, and local regulations.

**** SECTION 14 - TRANSPORT INFORMATION ****

IATA
Not regulated as a hazardous material.
IMO
Not regulated as a hazardous material.
RID/ADR
Not regulated as a hazardous material.

**** SECTION 15 - REGULATORY INFORMATION ****

European/International Regulations
European Labeling in Accordance with EC Directives
Hazard Symbols: Not available.
Risk Phrases:
Safety Phrases:
S 24/25 Avoid contact with skin and eyes.
WGK (Water Danger/Protection)
CAS# 13360-61-7: No information available.
Canada
CAS# 13360-61-7 is listed on Canada's NDSL List.
CAS# 13360-61-7 is not listed on Canada's Ingredient Disclosure List.
US FEDERAL
TSCA
CAS# 13360-61-7 is listed on the TSCA inventory.

**** SECTION 16 - ADDITIONAL INFORMATION ****

MSDS Creation Date: 9/02/1997 Revision #4 Date: 3/18/2003

The information above is believed to be accurate and represents the best
information currently available to us. However, we make no warranty of
merchantability or any other warranty, express or implied, with respect to
such information, and we assume no liability resulting from its use. Users
should make their own investigations to determine the suitability of the
information for their particular purposes. In no way shall the company be
liable for any claims, losses, or damages of any third party or for lost
profits or any special, indirect, incidental, consequential or exemplary
damages, howsoever arising, even if the company has been advised of
the possibility of such damages.
--------------------------------------------------------------------------------
--------------------------------------------------------------------------------
Search More   
ALL MSDS PAGES IN THIS GROUP
NAMECAS
Cadmium cyclohexanebutyrate 55700-14-6
1,3-Dichloropropane, 99% 142-28-9
1,2,3,4-Tetrahydrocarbazole, 99% 942-01-8
2-Chloro-4-Nitroaniline, 99% 121-87-9
4,6-Dihydroxypyrimidine, 98% 1193-24-4
(+)-Dehydroisoandrosterone, 99% (hplc) 53-43-0
Tiron(R) 149-45-1
Allyltributyltin, 97% 24850-33-7
Vanadium oxobis(1-phenyl-1,3-butane- dionate) 14767-37-4
Alpha-Methyl-D-Mannopyranoside, 99% 617-04-9
4-Chloro-3-Nitrobenzyl Alcohol, 98% 55912-20-4
3-Ethoxyacrylic Acid Ethyl Ester 1001-26-9
DL-4-Amino-3-Hydroxybutyric Acid, 98% 352-21-6
2-Bromo-4-Methylphenol, 96% 6627-55-0
4-Hydroxy-3-Methoxycinnamic Acid, 99% 1135-24-6
2,4-Dibromothiophene, 96% 3140-92-9
Acridine-9-Carboxylic Acid Hydrate 5336-90-3
Platinum on alumina (5% pt) 7440-06-4
l-Methionine methylsulfonium iodide, 99% e.e. 34236-06-1
N,n'-diheptyl-4,4'-bipyridinium dibromide, 99% (titr.) 6159-05-3
Ethyl 3-exo-aminobicyclo[2.2.1]heptane-2-exo-carboxylate 95630-75-4
Benzenesulfonic Acid Sodium Salt, 98% (uv-vis) 515-42-4
3,4'-Dimethylbenzophenone 13152-94-8
2-Bromobutyric acid, 99% 80-58-0
2-Methylbutylamine, 98% 96-15-1
4-Bromophenyl Methyl Carbinol, 98% 5391-88-8
2,3-Dimethylphenol, 97% (GC) 526-75-0
Phorone (2,6-dimethyl-2,5-heptadien-4- one), 98% 504-20-1
Alpha-Cyano-4-Hydroxycinnamic Acid, 97% 28166-41-8
Cibacron Brilliant Yellow 3G-P 50662-99-2
1-Bromo-2,6-Dichlorobenzene, 99% 19393-92-1
3-Hydroxypiperidine Hydrochloride, 99% 64051-79-2
Brij?? 58, contains 0.01% BHA and 0.005% citric acid as preservatives 9004-95-9
3'-Ethoxyacetanilide, 99+% 591-33-3
2-Fluoro-5-methylsulphonylnitrobenzene 95+%
(s)-(-)-2-Phenyl-1-propanol, 99+% 1517-68-6
3,6-Dichloropyridazine, 97% 141-30-0
2-Butoxytetrahydrofuran, 99% 1927-59-9
Benzethonium chloride, 97% 121-54-0
DL-Glyceraldehyde, 98% 56-82-6
Borane-N,N-diethylaniline complex 13289-97-9
4-Octylphenol, 99% (GC) 1806-26-4
Dibenzyldiselenide, 99+% 1482-82-2
1-Pentadecene, 98% 13360-61-7
5-Bromoacenaphthene, 94% 2051-98-1
Acetal, 99% 105-57-7
Niobium atomic absorption standard solution, 1 mg/ml Nb in 5% HF 7440-03-1
Cytochalasin A 14110-64-6
Cumene, 99% 98-82-8
Pentaerythrityl Tetrastearate (Pract) 115-83-3

Free MSDS Search ( Providing 250,000+ Material Properties )
Chemcas.com| Ads link:todaystock.net