Search   
MSDS 
:
 2-Butoxytetrahydrofuran, 99%
CAS 
:
 1927-59-9
SYNONYMS 
:
 2-Butoxytetrahydrofuran, all isomers.
**** SECTION 2 - COMPOSITION, INFORMATION ON INGREDIENTS ****

+----------------+--------------------------------------+----------+-----------+
| CAS# | Chemical Name | % | EINECS# |
|----------------|--------------------------------------|----------|-----------|
|----------------|--------------------------------------|----------|-----------|
|----------------|--------------------------------------|----------|-----------|
| 62987-01-3 |2-Butoxytetrahydrofuran | 99 | unlisted |
+----------------+--------------------------------------+----------+-----------+
Text for R-phrases: see Section 16
Hazard Symbols: XI
Risk Phrases: 36/37

**** SECTION 3 - HAZARDS IDENTIFICATION ****

EMERGENCY OVERVIEW
Irritating to eyes and respiratory system.

Potential Health Effects
Eye:
Causes eye irritation.
Skin:
May cause skin irritation.
Ingestion:
May cause gastrointestinal irritation with nausea, vomiting and
diarrhea. The toxicological properties of this substance have not
been fully investigated.
Inhalation:
Causes respiratory tract irritation. The toxicological properties of
this substance have not been fully investigated.
Chronic:
No information found.

**** SECTION 4 - FIRST AID MEASURES ****

Eyes:
Immediately flush eyes with plenty of water for at least 15 minutes,
occasionally lifting the upper and lower eyelids. Get medical aid.
Skin:
Get medical aid. Flush skin with plenty of water for at least 15
minutes while removing contaminated clothing and shoes. Wash clothing
before reuse.
Ingestion:
Never give anything by mouth to an unconscious person. Get medical
aid. Do NOT induce vomiting. If conscious and alert, rinse mouth and
drink 2-4 cupfuls of milk or water.
Inhalation:
Remove from exposure and move to fresh air immediately. If not
breathing, give artificial respiration. If breathing is difficult,
give oxygen. Get medical aid.
Notes to Physician:
Treat symptomatically and supportively.

**** SECTION 5 - FIRE FIGHTING MEASURES ****

General Information:
As in any fire, wear a self-contained breathing apparatus in
pressure-demand, MSHA/NIOSH (approved or equivalent), and full
protective gear. During a fire, irritating and highly toxic gases
may be generated by thermal decomposition or combustion. Use water
spray to keep fire-exposed containers cool. Water may be ineffective.
Material is lighter than water and a fire may be spread by the use of
water. Vapors may be heavier than air. They can spread along the
ground and collect in low or confined areas. Containers may explode
when heated.
Extinguishing Media:
Use extinguishing media most appropriate for the surrounding fire.

**** SECTION 6 - ACCIDENTAL RELEASE MEASURES ****

General Information: Use proper personal protective equipment as indicated
in Section 8.
Spills/Leaks:
Absorb spill with inert material (e.g. vermiculite, sand or earth),
then place in suitable container. Avoid runoff into storm sewers and
ditches which lead to waterways. Clean up spills immediately,
observing precautions in the Protective Equipment section. Remove all
sources of ignition. Provide ventilation.

**** SECTION 7 - HANDLING and STORAGE ****

Handling:
Wash thoroughly after handling. Remove contaminated clothing and
wash before reuse. Use with adequate ventilation. Avoid contact with
eyes, skin, and clothing. Keep container tightly closed. Keep away
from heat and flame. Avoid breathing vapor or mist.
Storage:
Store in a tightly closed container. Store in a cool, dry,
well-ventilated area away from incompatible substances. Containers
should be dated when opened and tested periodically for the presence
of peroxides. Should crystals form in a peroxidizable liquid,
peroxidation may have occurred and the product should be considered
extremely dangerous. In this instance, the container should only be
opened remotely by professionals. All peroxidizable substances should
be stored away from heat and light and be protected from ignition
sources.

**** SECTION 8 - EXPOSURE CONTROLS, PERSONAL PROTECTION ****

Engineering Controls:
Facilities storing or utilizing this material should be equipped
with an eyewash facility and a safety shower. Use adequate
ventilation to keep airborne concentrations low.
Exposure Limits
CAS# 1927-59-9:

CAS# 62987-01-3:


Personal Protective Equipment

Eyes:
Wear chemical splash goggles.
Skin:
Wear appropriate protective gloves to prevent skin
exposure.
Clothing:
Wear appropriate protective clothing to minimize
contact with skin.
Respirators:
A respiratory protection program that meets OSHA's 29
CFR 1910.134 and ANSI Z88.2 requirements or European
Standard EN 149 must be followed whenever workplace
conditions warrant respirator use.

**** SECTION 9 - PHYSICAL AND CHEMICAL PROPERTIES ****

Physical State: Liquid
Color: clear, colorless
Odor: benzene-like
pH: Not available.
Vapor Pressure: Not available.
Viscosity: Not available.
Boiling Point: Not available.
Freezing/Melting Point: Not available.
Autoignition Temperature: Not applicable.
Flash Point: Not available.
Explosion Limits, lower: Not available.
Explosion Limits, upper: Not available.
Decomposition Temperature:
Solubility in water:
Specific Gravity/Density: .9100 g/ml
Molecular Formula: C8H16O2
Molecular Weight: 144.21

**** SECTION 10 - STABILITY AND REACTIVITY ****

Chemical Stability:
Stable at room temperature in closed containers under normal storage
and handling conditions. Substances with similar functional groups
form explosive peroxides.
Conditions to Avoid:
Light, ignition sources, excess heat.
Incompatibilities with Other Materials:
Strong oxidizing agents.
Hazardous Decomposition Products:
Carbon monoxide, irritating and toxic fumes and gases, carbon
dioxide.
Hazardous Polymerization: Has not been reported

**** SECTION 11 - TOXICOLOGICAL INFORMATION ****

RTECS#:
CAS# 1927-59-9 unlisted.
CAS# 62987-01-3 unlisted.
LD50/LC50:
Not available.
Not available.
Carcinogenicity:
2-tert-Butoxytetrahydrofuran -
Not listed by ACGIH, IARC, or NTP.
2-Butoxytetrahydrofuran -
Not listed by ACGIH, IARC, or NTP.

**** SECTION 12 - ECOLOGICAL INFORMATION ****



**** SECTION 13 - DISPOSAL CONSIDERATIONS ****

Dispose of in a manner consistent with federal, state, and local regulations.

**** SECTION 14 - TRANSPORT INFORMATION ****

IATA
Not regulated as a hazardous material.
IMO
Not regulated as a hazardous material.
RID/ADR
Not regulated as a hazardous material.

**** SECTION 15 - REGULATORY INFORMATION ****

European/International Regulations
European Labeling in Accordance with EC Directives
Hazard Symbols: XI
Risk Phrases:
R 36/37 Irritating to eyes and respiratory system.
Safety Phrases:
S 24/25 Avoid contact with skin and eyes.
WGK (Water Danger/Protection)
CAS# 1927-59-9: No information available.
CAS# 62987-01-3: No information available.
Canada
None of the chemicals in this product are listed on the DSL/NDSL list.
CAS# 1927-59-9 is not listed on Canada's Ingredient Disclosure List.
CAS# 62987-01-3 is not listed on Canada's Ingredient Disclosure List.
US FEDERAL
TSCA
CAS# 1927-59-9 is not listed on the TSCA inventory.
It is for research and development use only.
CAS# 62987-01-3 is not listed on the TSCA inventory.
It is for research and development use only.

**** SECTION 16 - ADDITIONAL INFORMATION ****

Text for R-phrases from Section 2
MSDS Creation Date: 9/02/1997 Revision #7 Date: 4/26/2005

The information above is believed to be accurate and represents the best
information currently available to us. However, we make no warranty of
merchantability or any other warranty, express or implied, with respect to
such information, and we assume no liability resulting from its use. Users
should make their own investigations to determine the suitability of the
information for their particular purposes. In no way shall the company be
liable for any claims, losses, or damages of any third party or for lost
profits or any special, indirect, incidental, consequential or exemplary
damages, howsoever arising, even if the company has been advised of
the possibility of such damages.
--------------------------------------------------------------------------------
--------------------------------------------------------------------------------
Search More   
ALL MSDS PAGES IN THIS GROUP
NAMECAS
Cadmium cyclohexanebutyrate 55700-14-6
1,3-Dichloropropane, 99% 142-28-9
1,2,3,4-Tetrahydrocarbazole, 99% 942-01-8
2-Chloro-4-Nitroaniline, 99% 121-87-9
4,6-Dihydroxypyrimidine, 98% 1193-24-4
(+)-Dehydroisoandrosterone, 99% (hplc) 53-43-0
Tiron(R) 149-45-1
Allyltributyltin, 97% 24850-33-7
Vanadium oxobis(1-phenyl-1,3-butane- dionate) 14767-37-4
Alpha-Methyl-D-Mannopyranoside, 99% 617-04-9
4-Chloro-3-Nitrobenzyl Alcohol, 98% 55912-20-4
3-Ethoxyacrylic Acid Ethyl Ester 1001-26-9
DL-4-Amino-3-Hydroxybutyric Acid, 98% 352-21-6
2-Bromo-4-Methylphenol, 96% 6627-55-0
4-Hydroxy-3-Methoxycinnamic Acid, 99% 1135-24-6
2,4-Dibromothiophene, 96% 3140-92-9
Acridine-9-Carboxylic Acid Hydrate 5336-90-3
Platinum on alumina (5% pt) 7440-06-4
l-Methionine methylsulfonium iodide, 99% e.e. 34236-06-1
N,n'-diheptyl-4,4'-bipyridinium dibromide, 99% (titr.) 6159-05-3
Ethyl 3-exo-aminobicyclo[2.2.1]heptane-2-exo-carboxylate 95630-75-4
Benzenesulfonic Acid Sodium Salt, 98% (uv-vis) 515-42-4
3,4'-Dimethylbenzophenone 13152-94-8
2-Bromobutyric acid, 99% 80-58-0
2-Methylbutylamine, 98% 96-15-1
4-Bromophenyl Methyl Carbinol, 98% 5391-88-8
2,3-Dimethylphenol, 97% (GC) 526-75-0
Phorone (2,6-dimethyl-2,5-heptadien-4- one), 98% 504-20-1
Alpha-Cyano-4-Hydroxycinnamic Acid, 97% 28166-41-8
Cibacron Brilliant Yellow 3G-P 50662-99-2
1-Bromo-2,6-Dichlorobenzene, 99% 19393-92-1
3-Hydroxypiperidine Hydrochloride, 99% 64051-79-2
Brij?? 58, contains 0.01% BHA and 0.005% citric acid as preservatives 9004-95-9
3'-Ethoxyacetanilide, 99+% 591-33-3
2-Fluoro-5-methylsulphonylnitrobenzene 95+%
(s)-(-)-2-Phenyl-1-propanol, 99+% 1517-68-6
3,6-Dichloropyridazine, 97% 141-30-0
2-Butoxytetrahydrofuran, 99% 1927-59-9
Benzethonium chloride, 97% 121-54-0
DL-Glyceraldehyde, 98% 56-82-6
Borane-N,N-diethylaniline complex 13289-97-9
4-Octylphenol, 99% (GC) 1806-26-4
Dibenzyldiselenide, 99+% 1482-82-2
1-Pentadecene, 98% 13360-61-7
5-Bromoacenaphthene, 94% 2051-98-1
Acetal, 99% 105-57-7
Niobium atomic absorption standard solution, 1 mg/ml Nb in 5% HF 7440-03-1
Cytochalasin A 14110-64-6
Cumene, 99% 98-82-8
Pentaerythrityl Tetrastearate (Pract) 115-83-3

Free MSDS Search ( Providing 250,000+ Material Properties )
Chemcas.com| Ads link:todaystock.net