Search   
MSDS 
:
 MP Alumina R, ICN material
CAS 
:
 1344-28-1
SYNONYMS 
:
 Alumina
**** SECTION 2 - COMPOSITION, INFORMATION ON INGREDIENTS ****

+----------------+--------------------------------------+----------+-----------+
| CAS# | Chemical Name | % | EINECS# |
|----------------|--------------------------------------|----------|-----------|
| 1344-28-1 |Aluminium oxide | 90-100% | 215-691-6 |
+----------------+--------------------------------------+----------+-----------+
Hazard Symbols: None Listed.
Risk Phrases: None Listed.

**** SECTION 3 - HAZARDS IDENTIFICATION ****

EMERGENCY OVERVIEW
Not available.

Potential Health Effects
Eye:
May cause eye irritation.
Skin:
May cause skin irritation. May be harmful if absorbed through the
skin.
Ingestion:
May cause irritation of the digestive tract. May be harmful if
swallowed.
Inhalation:
May cause respiratory tract irritation. May be harmful if inhaled.
Chronic:
Prolonged or repeated exposure may cause nausea, dizziness, and
headache.

**** SECTION 4 - FIRST AID MEASURES ****

Eyes:
Flush eyes with plenty of water for at least 15 minutes,
occasionally lifting the upper and lower eyelids. Get medical aid.
Skin:
Get medical aid. Flush skin with plenty of water for at least 15
minutes while removing contaminated clothing and shoes.
Ingestion:
Get medical aid. Wash mouth out with water.
Inhalation:
Remove from exposure and move to fresh air immediately.
Notes to Physician:

**** SECTION 5 - FIRE FIGHTING MEASURES ****

General Information:
As in any fire, wear a self-contained breathing apparatus in
pressure-demand, MSHA/NIOSH (approved or equivalent), and full
protective gear. Substance is noncombustible. Vapors or dust may
form explosive mixture with air.
Extinguishing Media:
Use extinguishing media most appropriate for the surrounding fire.

**** SECTION 6 - ACCIDENTAL RELEASE MEASURES ****

General Information: Use proper personal protective equipment as indicated
in Section 8.
Spills/Leaks:
Vacuum or sweep up material and place into a suitable disposal
container. Avoid generating dusty conditions.

**** SECTION 7 - HANDLING and STORAGE ****

Handling:
Avoid breathing dust, vapor, mist, or gas. Avoid contact with skin
and eyes.
Storage:
Store in a cool, dry place. Store in a tightly closed container.

**** SECTION 8 - EXPOSURE CONTROLS, PERSONAL PROTECTION ****

Engineering Controls:
Use adequate general or local exhaust ventilation to keep airborne
concentrations below the permissible exposure limits.
Exposure Limits
CAS# 1344-28-1:
United States OSHA: 15 mg/m3 TWA (total dust); 5 mg/m3 TWA
(respirable fraction)
Belgium - TWA: 10 mg/m3 VLE (as Al)
France - VME: 10 mg/m3 VME
Japan: 0.5 mg/m3 OEL (respirable dust); 2 mg/m3 OEL (total dust)
Malaysia: 10 mg/m3 TWA (particulate matter containing no asbestos
<1% crystalline sili
Netherlands: 10 mg/m3 MAC
Spain: 10 mg/m3 VLA-ED

Personal Protective Equipment

Eyes:
Not available.
Skin:
Wear appropriate protective gloves to prevent skin
exposure.
Clothing:
Wear appropriate protective clothing to prevent skin
exposure.
Respirators:
Follow the OSHA respirator regulations found in 29
CFR 1910.134 or European Standard EN 149. Use a
NIOSH/MSHA or European Standard EN 149 approved
respirator if exposure limits are exceeded or if
irritation or other symptoms are experienced.

**** SECTION 9 - PHYSICAL AND CHEMICAL PROPERTIES ****

Physical State: Powder
Color: white
Odor: odorless
pH: Not available.
Vapor Pressure: Not available.
Viscosity: Not available.
Boiling Point: 2980 deg C
Freezing/Melting Point: 2030 deg C
Autoignition Temperature: Not available.
Flash Point: Not available.
Explosion Limits, lower: Not available.
Explosion Limits, upper: Not available.
Decomposition Temperature:
Solubility in water: Insoluble.
Specific Gravity/Density:
Molecular Formula: Al2O3
Molecular Weight: 101.96

**** SECTION 10 - STABILITY AND REACTIVITY ****

Chemical Stability:
Stable under normal temperatures and pressures.
Conditions to Avoid:
Incompatible materials, temperatures above 200C, exposure to moist
air or water.
Incompatibilities with Other Materials:
Oxidizing agents, strong reducing agents, strong acids, strong bases,
halocarbons, halogens, nitrates, oxygen difluoride, hydrogen
peroxide, mercury.
Hazardous Decomposition Products:
Aluminum oxide.
Hazardous Polymerization: Will not occur.

**** SECTION 11 - TOXICOLOGICAL INFORMATION ****

RTECS#:
CAS# 1344-28-1: BD1200000
LD50/LC50:
Not available.
Carcinogenicity:
Aluminium oxide -
Not listed by ACGIH, IARC, or NTP.
Other:
See actual entry in RTECS for complete information.

**** SECTION 12 - ECOLOGICAL INFORMATION ****



**** SECTION 13 - DISPOSAL CONSIDERATIONS ****

Dispose of in a manner consistent with federal, state, and local regulations.

**** SECTION 14 - TRANSPORT INFORMATION ****

IATA
Not regulated as a hazardous material.
IMO
Not regulated as a hazardous material.
RID/ADR
Not regulated as a hazardous material.

**** SECTION 15 - REGULATORY INFORMATION ****

European/International Regulations
European Labeling in Accordance with EC Directives
Hazard Symbols: Not available.
Risk Phrases:
Safety Phrases:
S 24/25 Avoid contact with skin and eyes.
WGK (Water Danger/Protection)
CAS# 1344-28-1: 0
Canada
CAS# 1344-28-1 is listed on Canada's DSL List.
CAS# 1344-28-1 is listed on Canada's Ingredient Disclosure List.
US FEDERAL
TSCA
CAS# 1344-28-1 is listed on the TSCA inventory.

**** SECTION 16 - ADDITIONAL INFORMATION ****

MSDS Creation Date: 9/20/2004 Revision #0 Date: Original.

The information above is believed to be accurate and represents the best
information currently available to us. However, we make no warranty of
merchantability or any other warranty, express or implied, with respect to
such information, and we assume no liability resulting from its use. Users
should make their own investigations to determine the suitability of the
information for their particular purposes. In no way shall the company be
liable for any claims, losses, or damages of any third party or for lost
profits or any special, indirect, incidental, consequential or exemplary
damages, howsoever arising, even if the company has been advised of
the possibility of such damages.
--------------------------------------------------------------------------------
--------------------------------------------------------------------------------
Search More   
ALL MSDS PAGES IN THIS GROUP
NAMECAS
Methyl 2-isocyano-3-methylpentanoate, 96% 0-01-1
4-Bromobenzonitrile, 98% 623-00-7
Methyl 3,4,5-Trihydroxybenzoate, 99 % 99-24-1
3-Hydroxy-2-nitropyridine, 97% 15128-82-2
Methyl 2-isocyano-3-methylbutyrate, 96% 40846-66-0
Methyl 3-isocyanopropionate, 96% 0-01-1
Methyl 2-isocyanopropionate, 96% 33115-74-1
1-Isocyano-3-isopropoxypropane, 96% 602262-07-7
1,1,3,3-Tetramethylbutyl isocyanide 14542-93-9
2,3-Dihydro-6-isocyano-1,4-benzodioxine, 95% 174092-82-1
Butyl Lactate, 99% (GC) 138-22-7
Dimethyl-d6 sulfate, 99+ atom % d 15199-43-6
Cyclopentyl isocyanide, 96% 68498-54-4
2-Cyclohexen-1-ylethyl isocyanide, 96% 172223-58-4
Diphenylmethyl isocyanide, 96% 3128-85-6
Methyl 2-isocyano-3-phenylpropionate, 96% 63157-14-2
alpha-Methylbenzyl isocyanide, 96% 17329-20-3
4-Fluorophenyl isocyanide, 95% 24075-34-1
3-Phenylpropyl isocyanide, 96% 111944-21-9
Phenylethyl isocyanide, 96% 59795-89-0
Benzo[a]pyrene, 96.5% 50-32-8
1-(Trifluoroacetyl)imidazole, 95% 1546-79-8
Ethylurea, 97% 625-52-5
1-Naphthalenemethanol, 98% 4780-79-4
Trimethylaluminum, 1,0M solution in heptane 75-24-1
Triisobutylaluminium, 1.1M solution in toluene 100-99-2
Ethylmagnesium chloride, 2.0M solution in THF 109-99-9
Triethylaluminium, 1,3M solution in heptane 97-93-8
Diethylzinc, 1,5M solution in toluene 108-88-3
Sodium thiophosphate hydrate 10489-48-2
cis-2,6-Dimethylmorpholine, 97% 6485-55-8
N-(2-Chloroethyl)pyrrolidine hydrochloride, 98% 7250-67-1
MP Alumina R, ICN material 1344-28-1
Tributylborane, 98% 122-56-5
L(-)-10-Camphorsulfonyl chloride 39262-22-1
Sodium cyanoborohydride, solution in THF 109-99-9
1-Phenyl-2-propanol, 99% 14898-87-4
N-(4-Dimethylamino-3,5-dinitrophenyl)maleimide 3475-74-9
8-Chloro-1-octanol, 98% 23144-52-7
1,10-Diamino-4,7-dioxadecane 2997-01-5
(4-Methoxybenzylidene)malonitrile, 98% 2826-26-8
1-(2-Hydroxyphenyl)piperazine, 98% 1011-17-2
5-Bromo-2-methylaniline, 98% 39478-78-9
1-Iodo-3-methylbutane, stabilized, 98% 541-28-6
2,4,6-Trivinylcyclotriboroxane-pyridine complex 92988-08-4
2-Methyl-5-nitroanisole, 99% 13120-77-9
Methyl 3-benzoylpropionate, 97% 25333-24-8
Ethyl 3-methylbenzoate, 98% 120-33-2
3,4-Dichlorostyrene, stabilized, 95% 2039-83-0
Dihydroquinine hydrobromide hydrate 0-01-1

Free MSDS Search ( Providing 250,000+ Material Properties )
Chemcas.com| Ads link:todaystock.net