Search   
MSDS 
:
 Tellurium, Reagent (Powder), >99% (Titr.)
CAS 
:
 13494-80-9
SYNONYMS 
:
 Telloy.
**** SECTION 2 - COMPOSITION, INFORMATION ON INGREDIENTS ****

+----------------+--------------------------------------+----------+-----------+
| CAS# | Chemical Name | % | EINECS# |
|----------------|--------------------------------------|----------|-----------|
| 13494-80-9 |Tellurium | >99 | 236-813-4 |
+----------------+--------------------------------------+----------+-----------+
Hazard Symbols: T
Risk Phrases: 25

**** SECTION 3 - HAZARDS IDENTIFICATION ****

EMERGENCY OVERVIEW
Toxic if swallowed.

Potential Health Effects
Eye:
May cause eye irritation.
Skin:
May cause skin irritation. Contact with the skin may cause skin
lesions which are characterized by cracking of the skin and the
development of slow-healing ulcers.
Ingestion:
Poison by ingestion. May cause headache. May cause nausea and
vomiting. May cause garlic smell on the breath and body.
Inhalation:
Inhalation of high concentrations may cause central nervous system
effects characterized by nausea, headache, dizziness, unconsciousness
and coma. May cause respiratory tract irritation. Inhalation may be
fatal as a result of spasm, inflammation, edema of the larynx and
bronchi, chemical pneumonitis and pulmonary edema.
Chronic:
Adverse reproductive effects have been reported in animals. Exposure
to large doses may cause central nervous system depression.

**** SECTION 4 - FIRST AID MEASURES ****

Eyes:
Immediately flush eyes with plenty of water for at least 15 minutes,
occasionally lifting the upper and lower eyelids. Get medical aid.
Skin:
Get medical aid. Immediately flush skin with plenty of water for at
least 15 minutes while removing contaminated clothing and shoes.
Wash clothing before reuse.
Ingestion:
Do not induce vomiting. If victim is conscious and alert, give 2-4
cupfuls of milk or water. Never give anything by mouth to an
unconscious person. Get medical aid immediately. Wash mouth out with
water.
Inhalation:
Remove from exposure and move to fresh air immediately. If breathing
is difficult, give oxygen. Get medical aid. Do NOT use mouth-to-mouth
resuscitation. If breathing has ceased apply artificial respiration
using oxygen and a suitable mechanical device such as a bag and a
mask.
Notes to Physician:

**** SECTION 5 - FIRE FIGHTING MEASURES ****

General Information:
As in any fire, wear a self-contained breathing apparatus in
pressure-demand, MSHA/NIOSH (approved or equivalent), and full
protective gear. During a fire, irritating and highly toxic gases
may be generated by thermal decomposition or combustion. Containers
may explode when heated. Non-combustible, substance itself does not
burn but may decompose upon heating to produce irritating, corrosive
and/or toxic fumes. Runoff from fire control or dilution water may
cause pollution.
Extinguishing Media:
Do NOT get water inside containers. Do NOT use straight streams of
water. For small fires, use dry chemical, carbon dioxide, or water
spray. Cool containers with flooding quantities of water until well
after fire is out. For large fires, use water spray, fog or regular
foam.

**** SECTION 6 - ACCIDENTAL RELEASE MEASURES ****

General Information: Use proper personal protective equipment as indicated
in Section 8.
Spills/Leaks:
Vacuum or sweep up material and place into a suitable disposal
container. Avoid runoff into storm sewers and ditches which lead to
waterways. Clean up spills immediately, observing precautions in the
Protective Equipment section. Avoid generating dusty conditions.
Provide ventilation. Do not get water inside containers.

**** SECTION 7 - HANDLING and STORAGE ****

Handling:
Wash thoroughly after handling. Use with adequate ventilation.
Minimize dust generation and accumulation. Follow all MSDS and label
precautions even after container is emptied because they may contain
product residues. Do not breathe dust, vapor, mist, or gas. Do not
get in eyes, on skin, or on clothing. Keep container tightly closed.
Use only in a chemical fume hood.
Storage:
Store in a cool, dry, well-ventilated area away from incompatible
substances. Keep containers tightly closed.

**** SECTION 8 - EXPOSURE CONTROLS, PERSONAL PROTECTION ****

Engineering Controls:
Facilities storing or utilizing this material should be equipped
with an eyewash facility and a safety shower. Use adequate
ventilation to keep airborne concentrations low.
Exposure Limits
CAS# 13494-80-9:
United Kingdom, WEL - TWA: 0.1 mg/m3 TWA
United Kingdom, WEL - STEL: 0.3 mg/m3 STEL
United States OSHA: 0.1 mg/m3 TWA
Belgium - TWA: 0.1 mg/m3 VLE
France - VME: 0.1 mg/m3 VME
Germany: 0.1 mg/m3 TWA (inhalable fraction)
Malaysia: 0.1 mg/m3 TWA
Netherlands: 0.1 mg/m3 MAC
Russia: 0.01 mg/m3 TWA
Spain: 0.1 mg/m3 VLA-ED

Personal Protective Equipment

Eyes:
Wear appropriate protective eyeglasses or chemical
safety goggles as described by OSHA's eye and face
protection regulations in 29 CFR 1910.133 or European
Standard EN166.
Skin:
Wear appropriate protective gloves to prevent skin
exposure.
Clothing:
Wear appropriate protective clothing to prevent skin
exposure.
Respirators:
Follow the OSHA respirator regulations found in 29
CFR 1910.134 or European Standard EN 149. Use a
NIOSH/MSHA or European Standard EN 149 approved
respirator if exposure limits are exceeded or if
irritation or other symptoms are experienced.

**** SECTION 9 - PHYSICAL AND CHEMICAL PROPERTIES ****

Physical State: Powder
Color: grey - white
Odor: odorless
pH: Not available.
Vapor Pressure: 1 mm Hg @520 deg C
Viscosity: Not available.
Boiling Point: 989.8 deg C
Freezing/Melting Point: 449.5 deg C
Autoignition Temperature: Not applicable.
Flash Point: Not applicable.
Explosion Limits, lower: Not available.
Explosion Limits, upper: Not available.
Decomposition Temperature:
Solubility in water: insoluble
Specific Gravity/Density: 6.11-6.27
Molecular Formula: Te
Molecular Weight: 127.60

**** SECTION 10 - STABILITY AND REACTIVITY ****

Chemical Stability:
Stable at room temperature in closed containers under normal storage
and handling conditions. Slowy tarnishes in air.
Conditions to Avoid:
Incompatible materials, ignition sources, dust generation, excess
heat.
Incompatibilities with Other Materials:
Zinc, strong acids, strong bases, oxidizing agents, active metals,
halogens.
Hazardous Decomposition Products:
Irritating and toxic fumes and gases.
Hazardous Polymerization: Will not occur.

**** SECTION 11 - TOXICOLOGICAL INFORMATION ****

RTECS#:
CAS# 13494-80-9: WY2625000
LD50/LC50:
CAS# 13494-80-9: Inhalation, rat: LC50 = >2420 mg/m3/4H; Oral,
mouse: LD50 = 20 mg/kg; Oral, rabbit: LD50 = 67 mg/kg; Oral, rat:
LD50 = 83 mg/kg.
Carcinogenicity:
Tellurium -
Not listed by ACGIH, IARC, or NTP.
Other:
See actual entry in RTECS for complete information.

**** SECTION 12 - ECOLOGICAL INFORMATION ****



**** SECTION 13 - DISPOSAL CONSIDERATIONS ****

Dispose of in a manner consistent with federal, state, and local regulations.

**** SECTION 14 - TRANSPORT INFORMATION ****

IATA
Shipping Name: TELLURIUM COMPOUND, N.O.S.
Hazard Class: 6.1
UN Number: 3284
Packing Group: III
IMO
Shipping Name: TELLURIUM COMPOUND, N.O.S.
Hazard Class: 6.1
UN Number: 3284
Packing Group: III
RID/ADR
Shipping Name: TELLURIUM COMPOUND, N.O.S.
Hazard Class: 6.1
UN Number: 3284
Packing group: III

**** SECTION 15 - REGULATORY INFORMATION ****

European/International Regulations
European Labeling in Accordance with EC Directives
Hazard Symbols: T
Risk Phrases:
R 25 Toxic if swallowed.
Safety Phrases:
S 22 Do not breathe dust.
S 24/25 Avoid contact with skin and eyes.
WGK (Water Danger/Protection)
CAS# 13494-80-9: No information available.
Canada
CAS# 13494-80-9 is listed on Canada's DSL List.
CAS# 13494-80-9 is listed on Canada's Ingredient Disclosure List.
US FEDERAL
TSCA
CAS# 13494-80-9 is listed on the TSCA inventory.

**** SECTION 16 - ADDITIONAL INFORMATION ****

MSDS Creation Date: 4/13/1999 Revision #3 Date: 3/18/2003

The information above is believed to be accurate and represents the best
information currently available to us. However, we make no warranty of
merchantability or any other warranty, express or implied, with respect to
such information, and we assume no liability resulting from its use. Users
should make their own investigations to determine the suitability of the
information for their particular purposes. In no way shall the company be
liable for any claims, losses, or damages of any third party or for lost
profits or any special, indirect, incidental, consequential or exemplary
damages, howsoever arising, even if the company has been advised of
the possibility of such damages.
--------------------------------------------------------------------------------
--------------------------------------------------------------------------------
Search More   
ALL MSDS PAGES IN THIS GROUP
NAMECAS
Tellurium, Reagent (Powder), >99% (Titr.) 13494-80-9
Pamoic acid, 98+% (hplc) 130-85-8
Isopilocarpine nitrate 5984-94-1
4-Ethylcyclohexanone, 97% 5441-51-0
Pentane 109-66-0
Pepsin 9001-75-6
2-Methyl-3-Furanethiol, ca.90%, Balance Oxidized Compound 28588-74-1
Perchloric acid, 50-72% 7601-90-3
4-Amino-2,6-Dibromophenol, 99% (TLC) 609-21-2
Calcon, pract. 2538-85-4
4-Nitrophenyl phosphate di(cyclohexylamine) salt 52483-84-8
1-Aminopyrene, 97% 1606-67-3
Periodic Acid 10450-60-9
Tribenzylamine, 99+% 620-40-6
Diethyl chlorothiophosphate, 97% 2524-04-1
Petrolatum, White 8009-03-8
Petroleum Ether 71-43-2
N-Amylamine , 99% 110-58-7
4-Formylcinnamic acid, 98%, predominantly trans 23359-08-2
Cresyl Violet perchlorate, laser grade, 99% 41830-80-2
1-Octyne, 99% 629-05-0
Phenol, Crystallized 108-95-2
Phenol Liquid 108-95-2
Dodecylphenol, mixture of isomers 104-43-8
Phenolphthalein 77-09-8
N-Methyl Pyrrolecarboxylate, 95%, Remainder Mainly Pyrrole 4277-63-8
2,6-Diphenylpyridine, 97+% 3558-69-8
n-(Phenylseleno)-phthalimide, 98% 71098-88-9
Ethyl 3-(2,2-dichlorovinyl)-2,2-dimethyl-1 59609-49-3
Phenylacetic acid 103-82-2
Phenylthiotrimethylsilane, 97% 4551-15-9
Tetrakis(2-Hydroxyethyl)Ammonium Bromide, 99% (Titr.) 4328-04-5
n-Hexane-d14, 99.5+ atom % D 110-54-3
Calycanthine 595-05-1
2,2-Dichloropentanoic acid, 92% 18240-68-1
2-Chloro-5-Nitropyridine, 99% 4548-45-2
3,6-Endoxo-1,2,3,6-tetrahydrophthalic anhydride, 98% 5426-09-5
Linolenoyl Chloride (Pract) 59044-29-0
2-Amino-2-Thiazoline, 98% 1779-81-3
7-Trifluoromethyl-4-Quinolinethiol, Tech. 322-97-4
4-Piperidinoacetophenone, 97% 10342-85-5
4-Chloro-2,6-diaminopyrimidine, 98% 156-83-2
4-Heptylphenol, 98% (Titr.) 1987-50-4
Tetracosanol 99+% 506-51-4
4-Maleimido-Tempo,Free Radical 15178-63-9
2-Chloroethyl ethyl sulfide, 95% 693-07-2
Titanium (II) Hydride, 98% 7704-98-5
Phenyl Salicylate 118-55-8
Rhodanine, 99% 141-84-4
3,4-Dichlorophenyl Isocyanate, 99+% (GC) 102-36-3

Free MSDS Search ( Providing 250,000+ Material Properties )
Chemcas.com| Ads link:todaystock.net