Search   
MSDS 
:
 2-Chloroethyl ethyl sulfide, 95%
CAS 
:
 693-07-2
SYNONYMS 
:
 2-(Ethylthio) chloroethane;2-chloroethyl ethyl     thioether;2-ethylthioethyl chloride; ethyl (2-chloroethyl) sulfide
**** SECTION 2 - COMPOSITION, INFORMATION ON INGREDIENTS ****

+----------------+--------------------------------------+----------+-----------+
| CAS# | Chemical Name | % | EINECS# |
|----------------|--------------------------------------|----------|-----------|
| 693-07-2 |2-Chloroethyl ethyl sulfide | 95 | 211-742-1 |
+----------------+--------------------------------------+----------+-----------+
Hazard Symbols: XN
Risk Phrases: 10 22 36/37/38 40

**** SECTION 3 - HAZARDS IDENTIFICATION ****

EMERGENCY OVERVIEW
Flammable. Harmful if swallowed. Irritating to eyes, respiratory
system and skin. Limited evidence of a carcinogenic effect.Corrosive.

Potential Health Effects
Eye:
Causes severe eye irritation. May cause chemical conjunctivitis
and corneal damage.
Skin:
Causes severe skin irritation. This material is a vesicant, that is,
it will induce blistering. Causes blistering of the skin. Effects may
be delayed. May cause cyanosis of the extremities.
Ingestion:
Harmful if swallowed. May cause gastrointestinal irritation with
nausea, vomiting and diarrhea. Ingestion of large amounts may cause
CNS depression.
Inhalation:
Causes severe respiratory tract irritation. Aspiration may lead to
pulmonary edema. Vapors may cause dizziness or suffocation. May cause
burning sensation in the chest.
Chronic:
Not available.

**** SECTION 4 - FIRST AID MEASURES ****

Eyes:
Immediately flush eyes with plenty of water for at least 15 minutes,
occasionally lifting the upper and lower eyelids. Get medical aid
immediately.
Skin:
Get medical aid immediately. Flush skin with plenty of water for at
least 15 minutes while removing contaminated clothing and shoes.
Wash clothing before reuse.
Ingestion:
Never give anything by mouth to an unconscious person. Get medical
aid immediately. Do NOT induce vomiting. If conscious and alert,
rinse mouth and drink 2-4 cupfuls of milk or water.
Inhalation:
Get medical aid immediately. Remove from exposure and move to fresh
air immediately. If not breathing, give artificial respiration. If
breathing is difficult, give oxygen.
Notes to Physician:
Treat symptomatically and supportively.

**** SECTION 5 - FIRE FIGHTING MEASURES ****

General Information:
Containers can build up pressure if exposed to heat and/or fire. As
in any fire, wear a self-contained breathing apparatus in
pressure-demand, MSHA/NIOSH (approved or equivalent), and full
protective gear. Vapors may form an explosive mixture with air.
Vapors can travel to a source of ignition and flash back. During a
fire, irritating and highly toxic gases may be generated by thermal
decomposition or combustion. Will burn if involved in a fire. Use
water spray to keep fire-exposed containers cool. Containers may
explode in the heat of a fire. Flammable liquid and vapor. Vapors may
be heavier than air. They can spread along the ground and collect in
low or confined areas.
Extinguishing Media:
For small fires, use dry chemical, carbon dioxide, water spray or
alcohol-resistant foam. For large fires, use water spray, fog, or
alcohol-resistant foam. Use water spray to cool fire-exposed
containers. Water may be ineffective. Do NOT use straight streams of
water.

**** SECTION 6 - ACCIDENTAL RELEASE MEASURES ****

General Information: Use proper personal protective equipment as indicated
in Section 8.
Spills/Leaks:
Remove all sources of ignition. Absorb spill using an absorbent,
non-combustible material such as earth, sand, or vermiculite. Do not
use combustible materials such as sawdust. Use a spark-proof tool.
Provide ventilation. A vapor suppressing foam may be used to reduce
vapors.

**** SECTION 7 - HANDLING and STORAGE ****

Handling:
Wash thoroughly after handling. Remove contaminated clothing and
wash before reuse. Use only in a well-ventilated area. Ground and
bond containers when transferring material. Use spark-proof tools and
explosion proof equipment. Do not get in eyes, on skin, or on
clothing. Empty containers retain product residue, (liquid and/or
vapor), and can be dangerous. Keep container tightly closed. Keep
away from heat, sparks and flame. Do not ingest or inhale. Do not
pressurize, cut, weld, braze, solder, drill, grind, or expose empty
containers to heat, sparks or open flames.
Storage:
Keep away from heat, sparks, and flame. Store in a tightly closed
container. Store in a cool, dry, well-ventilated area away from
incompatible substances. Flammables-area.

**** SECTION 8 - EXPOSURE CONTROLS, PERSONAL PROTECTION ****

Engineering Controls:
Facilities storing or utilizing this material should be equipped
with an eyewash facility and a safety shower. Use adequate general or
local explosion-proof ventilation to keep airborne levels to
acceptable levels.
Exposure Limits
CAS# 693-07-2:


Personal Protective Equipment

Eyes:
Wear appropriate protective eyeglasses or chemical
safety goggles as described by OSHA's eye and face
protection regulations in 29 CFR 1910.133 or European
Standard EN166.
Skin:
Wear appropriate protective gloves to prevent skin
exposure.
Clothing:
Wear appropriate protective clothing to prevent skin
exposure.
Respirators:
A respiratory protection program that meets OSHA's 29
CFR 1910.134 and ANSI Z88.2 requirements or European
Standard EN 149 must be followed whenever workplace
conditions warrant respirator use.

**** SECTION 9 - PHYSICAL AND CHEMICAL PROPERTIES ****

Physical State: Liquid
Color: clear slightly yellow
Odor: stench - sulfide odor
pH: Not available.
Vapor Pressure: 44 mm Hg @ 73 deg C
Viscosity: Not available.
Boiling Point: 156.0 - 157.0 deg C @ 760.00m
Freezing/Melting Point: Not available.
Autoignition Temperature: Not applicable.
Flash Point: 52 deg C ( 125.60 deg F)
Explosion Limits, lower: Not available.
Explosion Limits, upper: Not available.
Decomposition Temperature: Not available.
Solubility in water: Slightly soluble.
Specific Gravity/Density: 1.0700g/cm3
Molecular Formula: C4H9ClS
Molecular Weight: 124.63

**** SECTION 10 - STABILITY AND REACTIVITY ****

Chemical Stability:
Stable at room temperature in closed containers under normal storage
and handling conditions.
Conditions to Avoid:
Incompatible materials, ignition sources, excess heat, strong
oxidants.
Incompatibilities with Other Materials:
Strong oxidizing agents, strong bases.
Hazardous Decomposition Products:
Hydrogen chloride, carbon monoxide, oxides of sulfur, carbon dioxide,
hydrogen sulfide, chloride fumes, 1,4-dithiane.
Hazardous Polymerization: Has not been reported.

**** SECTION 11 - TOXICOLOGICAL INFORMATION ****

RTECS#:
CAS# 693-07-2: WQ3250000
LD50/LC50:
CAS# 693-07-2: Draize test, rabbit, eye: 250 ug/24H Severe; Draize
test, rabbit, skin: 500 mg/24H Severe; Oral, rat: LD50 = 252 mg/kg.
Carcinogenicity:
2-Chloroethyl ethyl sulfide -
Not listed by ACGIH, IARC, or NTP.
Other:
See actual entry in RTECS for complete information.

**** SECTION 12 - ECOLOGICAL INFORMATION ****

Other
No information available.

**** SECTION 13 - DISPOSAL CONSIDERATIONS ****

Dispose of in a manner consistent with federal, state, and local regulations.

**** SECTION 14 - TRANSPORT INFORMATION ****

IATA
Shipping Name: FLAMMABLE LIQUID, TOXIC, N.O.S.*
Hazard Class: 3 (6.1)
UN Number: 1992
Packing Group: III
IMO
Shipping Name: FLAMMABLE LIQUID, TOXIC, N.O.S.
Hazard Class: 3.3
UN Number: 1992
Packing Group: III
RID/ADR
Shipping Name: FLAMMABLE LIQUID, TOXIC, N.O.S.
Hazard Class: 3
UN Number: 1992
Packing group: III

**** SECTION 15 - REGULATORY INFORMATION ****

European/International Regulations
European Labeling in Accordance with EC Directives
Hazard Symbols: XN
Risk Phrases:
R 10 Flammable.
R 22 Harmful if swallowed.
R 36/37/38 Irritating to eyes, respiratory system
and skin.
R 40 Limited evidence of a carcinogenic effect.
Safety Phrases:
S 16 Keep away from sources of ignition - No
smoking.
S 36/37/39 Wear suitable protective clothing, gloves
and eye/face protection.
S 45 In case of accident or if you feel unwell, seek
medical advice immediately (show the label where
possible).
WGK (Water Danger/Protection)
CAS# 693-07-2: No information available.
Canada
CAS# 693-07-2 is listed on Canada's NDSL List.
CAS# 693-07-2 is listed on Canada's Ingredient Disclosure List.
US FEDERAL
TSCA
CAS# 693-07-2 is listed on the TSCA inventory.

**** SECTION 16 - ADDITIONAL INFORMATION ****

MSDS Creation Date: 9/02/1997 Revision #6 Date: 3/18/2003

The information above is believed to be accurate and represents the best
information currently available to us. However, we make no warranty of
merchantability or any other warranty, express or implied, with respect to
such information, and we assume no liability resulting from its use. Users
should make their own investigations to determine the suitability of the
information for their particular purposes. In no way shall the company be
liable for any claims, losses, or damages of any third party or for lost
profits or any special, indirect, incidental, consequential or exemplary
damages, howsoever arising, even if the company has been advised of
the possibility of such damages.
--------------------------------------------------------------------------------
--------------------------------------------------------------------------------
Search More   
ALL MSDS PAGES IN THIS GROUP
NAMECAS
Tellurium, Reagent (Powder), >99% (Titr.) 13494-80-9
Pamoic acid, 98+% (hplc) 130-85-8
Isopilocarpine nitrate 5984-94-1
4-Ethylcyclohexanone, 97% 5441-51-0
Pentane 109-66-0
Pepsin 9001-75-6
2-Methyl-3-Furanethiol, ca.90%, Balance Oxidized Compound 28588-74-1
Perchloric acid, 50-72% 7601-90-3
4-Amino-2,6-Dibromophenol, 99% (TLC) 609-21-2
Calcon, pract. 2538-85-4
4-Nitrophenyl phosphate di(cyclohexylamine) salt 52483-84-8
1-Aminopyrene, 97% 1606-67-3
Periodic Acid 10450-60-9
Tribenzylamine, 99+% 620-40-6
Diethyl chlorothiophosphate, 97% 2524-04-1
Petrolatum, White 8009-03-8
Petroleum Ether 71-43-2
N-Amylamine , 99% 110-58-7
4-Formylcinnamic acid, 98%, predominantly trans 23359-08-2
Cresyl Violet perchlorate, laser grade, 99% 41830-80-2
1-Octyne, 99% 629-05-0
Phenol, Crystallized 108-95-2
Phenol Liquid 108-95-2
Dodecylphenol, mixture of isomers 104-43-8
Phenolphthalein 77-09-8
N-Methyl Pyrrolecarboxylate, 95%, Remainder Mainly Pyrrole 4277-63-8
2,6-Diphenylpyridine, 97+% 3558-69-8
n-(Phenylseleno)-phthalimide, 98% 71098-88-9
Ethyl 3-(2,2-dichlorovinyl)-2,2-dimethyl-1 59609-49-3
Phenylacetic acid 103-82-2
Phenylthiotrimethylsilane, 97% 4551-15-9
Tetrakis(2-Hydroxyethyl)Ammonium Bromide, 99% (Titr.) 4328-04-5
n-Hexane-d14, 99.5+ atom % D 110-54-3
Calycanthine 595-05-1
2,2-Dichloropentanoic acid, 92% 18240-68-1
2-Chloro-5-Nitropyridine, 99% 4548-45-2
3,6-Endoxo-1,2,3,6-tetrahydrophthalic anhydride, 98% 5426-09-5
Linolenoyl Chloride (Pract) 59044-29-0
2-Amino-2-Thiazoline, 98% 1779-81-3
7-Trifluoromethyl-4-Quinolinethiol, Tech. 322-97-4
4-Piperidinoacetophenone, 97% 10342-85-5
4-Chloro-2,6-diaminopyrimidine, 98% 156-83-2
4-Heptylphenol, 98% (Titr.) 1987-50-4
Tetracosanol 99+% 506-51-4
4-Maleimido-Tempo,Free Radical 15178-63-9
2-Chloroethyl ethyl sulfide, 95% 693-07-2
Titanium (II) Hydride, 98% 7704-98-5
Phenyl Salicylate 118-55-8
Rhodanine, 99% 141-84-4
3,4-Dichlorophenyl Isocyanate, 99+% (GC) 102-36-3

Free MSDS Search ( Providing 250,000+ Material Properties )
Chemcas.com| Ads link:todaystock.net