Search   
MSDS 
:
 Petrolatum, White
CAS 
:
 8009-03-8
SYNONYMS 
:
 Petroleum Jelly
**** SECTION 2 - COMPOSITION, INFORMATION ON INGREDIENTS ****

+----------------+--------------------------------------+----------+-----------+
| CAS# | Chemical Name | % | EINECS# |
|----------------|--------------------------------------|----------|-----------|
| 8009-03-8 |PETROLATUM | 100 | 232-373-2 |
+----------------+--------------------------------------+----------+-----------+
Hazard Symbols: None Listed.
Risk Phrases: None Listed.

**** SECTION 3 - HAZARDS IDENTIFICATION ****

EMERGENCY OVERVIEW
Not available.

Potential Health Effects
Eye:
May cause mild eye irritation.
Skin:
May cause skin irritation. Low hazard for usual industrial handling.
Ingestion:
Ingestion of large amounts may cause gastrointestinal irritation.
Inhalation:
Inhalation of a mist of this material may cause respiratory tract
irritation.
Chronic:
Prolonged or repeated skin contact may cause dermatitis.

**** SECTION 4 - FIRST AID MEASURES ****

Eyes:
Flush eyes with plenty of water for at least 15 minutes,
occasionally lifting the upper and lower eyelids. Get medical aid.
Skin:
Flush skin with plenty of water for at least 15 minutes while
removing contaminated clothing and shoes. Get medical aid if
irritation develops or persists. Wash clothing before reuse.
Ingestion:
Get medical aid. Do NOT induce vomiting. If conscious and alert,
rinse mouth and drink 2-4 cupfuls of milk or water.
Inhalation:
Remove from exposure and move to fresh air immediately. If not
breathing, give artificial respiration. If breathing is difficult,
give oxygen. Get medical aid if cough or other symptoms appear.
Notes to Physician:

**** SECTION 5 - FIRE FIGHTING MEASURES ****

General Information:
As in any fire, wear a self-contained breathing apparatus in
pressure-demand, MSHA/NIOSH (approved or equivalent), and full
protective gear. Combustion generates toxic fumes. During a fire,
irritating and highly toxic gases may be generated by thermal
decomposition or combustion.
Extinguishing Media:
Use agent most appropriate to extinguish fire. Use water spray, dry
chemical, carbon dioxide, or appropriate foam.

**** SECTION 6 - ACCIDENTAL RELEASE MEASURES ****

General Information: Use proper personal protective equipment as indicated
in Section 8.
Spills/Leaks:
Absorb spill with inert material (e.g. vermiculite, sand or earth),
then place in suitable container. Clean up spills immediately,
observing precautions in the Protective Equipment section. Sweep up
or absorb material, then place into a suitable clean, dry, closed
container for disposal. Provide ventilation.

**** SECTION 7 - HANDLING and STORAGE ****

Handling:
Wash thoroughly after handling. Wash hands before eating. Use with
adequate ventilation. Avoid contact with eyes, skin, and clothing.
Keep container tightly closed. Avoid ingestion and inhalation.
Storage:
Store in a tightly closed container. Store in a cool, dry,
well-ventilated area away from incompatible substances.

**** SECTION 8 - EXPOSURE CONTROLS, PERSONAL PROTECTION ****

Engineering Controls:
Good general ventilation should be sufficient to control airborne
levels. Facilities storing or utilizing this material should be
equipped with an eyewash facility and a safety shower.
Exposure Limits
CAS# 8009-03-8:


Personal Protective Equipment

Eyes:
Wear appropriate protective eyeglasses or chemical
safety goggles as described by OSHA's eye and face
protection regulations in 29 CFR 1910.133 or European
Standard EN166.
Skin:
Protective garments not normally required.
Clothing:
Protective garments not normally required.
Respirators:
A respiratory protection program that meets OSHA's 29
CFR 1910.134 and ANSI Z88.2 requirements or European
Standard EN 149 must be followed whenever workplace
conditions warrant respirator use.

**** SECTION 9 - PHYSICAL AND CHEMICAL PROPERTIES ****

Physical State: Solid
Color: almost colorless
Odor: odorless
pH: Not available.
Vapor Pressure: Not available.
Viscosity: cSt 100 deg C
Boiling Point: Not available.
Freezing/Melting Point: 38 - 45 deg C
Autoignition Temperature: Not available.
Flash Point: 185 deg C ( 365.00 deg F)
Explosion Limits, lower: Not available.
Explosion Limits, upper: Not available.
Decomposition Temperature:
Solubility in water: insoluble
Specific Gravity/Density: .8400g/cm3
Molecular Formula:
Molecular Weight:

**** SECTION 10 - STABILITY AND REACTIVITY ****

Chemical Stability:
Stable under normal temperatures and pressures.
Conditions to Avoid:
Incompatible materials, excess heat.
Incompatibilities with Other Materials:
Oxidizing agents.
Hazardous Decomposition Products:
Carbon monoxide, irritating and toxic fumes and gases, carbon
dioxide, irritating aldehydes and ketones.
Hazardous Polymerization: Will not occur.

**** SECTION 11 - TOXICOLOGICAL INFORMATION ****

RTECS#:
CAS# 8009-03-8: SE6780000
LD50/LC50:
Not available.
Carcinogenicity:
PETROLATUM -
Not listed by ACGIH, IARC, or NTP.
Other:
See actual entry in RTECS for complete information.

**** SECTION 12 - ECOLOGICAL INFORMATION ****



**** SECTION 13 - DISPOSAL CONSIDERATIONS ****

Dispose of in a manner consistent with federal, state, and local regulations.

**** SECTION 14 - TRANSPORT INFORMATION ****

IATA
Not regulated as a hazardous material.
IMO
Not regulated as a hazardous material.
RID/ADR
Not regulated as a hazardous material.

**** SECTION 15 - REGULATORY INFORMATION ****

European/International Regulations
European Labeling in Accordance with EC Directives
Hazard Symbols: Not available.
Risk Phrases:
Safety Phrases:
S 24/25 Avoid contact with skin and eyes.
S 28A After contact with skin, wash immediately with
plenty of water.
S 37 Wear suitable gloves.
S 45 In case of accident or if you feel unwell, seek
medical advice immediately (show the label where
possible).
WGK (Water Danger/Protection)
CAS# 8009-03-8: 0
Canada
CAS# 8009-03-8 is listed on Canada's DSL List.
CAS# 8009-03-8 is not listed on Canada's Ingredient Disclosure List.
US FEDERAL
TSCA
CAS# 8009-03-8 is listed on the TSCA inventory.

**** SECTION 16 - ADDITIONAL INFORMATION ****

MSDS Creation Date: 7/07/1999 Revision #3 Date: 3/18/2003

The information above is believed to be accurate and represents the best
information currently available to us. However, we make no warranty of
merchantability or any other warranty, express or implied, with respect to
such information, and we assume no liability resulting from its use. Users
should make their own investigations to determine the suitability of the
information for their particular purposes. In no way shall the company be
liable for any claims, losses, or damages of any third party or for lost
profits or any special, indirect, incidental, consequential or exemplary
damages, howsoever arising, even if the company has been advised of
the possibility of such damages.
--------------------------------------------------------------------------------
--------------------------------------------------------------------------------
Search More   
ALL MSDS PAGES IN THIS GROUP
NAMECAS
Tellurium, Reagent (Powder), >99% (Titr.) 13494-80-9
Pamoic acid, 98+% (hplc) 130-85-8
Isopilocarpine nitrate 5984-94-1
4-Ethylcyclohexanone, 97% 5441-51-0
Pentane 109-66-0
Pepsin 9001-75-6
2-Methyl-3-Furanethiol, ca.90%, Balance Oxidized Compound 28588-74-1
Perchloric acid, 50-72% 7601-90-3
4-Amino-2,6-Dibromophenol, 99% (TLC) 609-21-2
Calcon, pract. 2538-85-4
4-Nitrophenyl phosphate di(cyclohexylamine) salt 52483-84-8
1-Aminopyrene, 97% 1606-67-3
Periodic Acid 10450-60-9
Tribenzylamine, 99+% 620-40-6
Diethyl chlorothiophosphate, 97% 2524-04-1
Petrolatum, White 8009-03-8
Petroleum Ether 71-43-2
N-Amylamine , 99% 110-58-7
4-Formylcinnamic acid, 98%, predominantly trans 23359-08-2
Cresyl Violet perchlorate, laser grade, 99% 41830-80-2
1-Octyne, 99% 629-05-0
Phenol, Crystallized 108-95-2
Phenol Liquid 108-95-2
Dodecylphenol, mixture of isomers 104-43-8
Phenolphthalein 77-09-8
N-Methyl Pyrrolecarboxylate, 95%, Remainder Mainly Pyrrole 4277-63-8
2,6-Diphenylpyridine, 97+% 3558-69-8
n-(Phenylseleno)-phthalimide, 98% 71098-88-9
Ethyl 3-(2,2-dichlorovinyl)-2,2-dimethyl-1 59609-49-3
Phenylacetic acid 103-82-2
Phenylthiotrimethylsilane, 97% 4551-15-9
Tetrakis(2-Hydroxyethyl)Ammonium Bromide, 99% (Titr.) 4328-04-5
n-Hexane-d14, 99.5+ atom % D 110-54-3
Calycanthine 595-05-1
2,2-Dichloropentanoic acid, 92% 18240-68-1
2-Chloro-5-Nitropyridine, 99% 4548-45-2
3,6-Endoxo-1,2,3,6-tetrahydrophthalic anhydride, 98% 5426-09-5
Linolenoyl Chloride (Pract) 59044-29-0
2-Amino-2-Thiazoline, 98% 1779-81-3
7-Trifluoromethyl-4-Quinolinethiol, Tech. 322-97-4
4-Piperidinoacetophenone, 97% 10342-85-5
4-Chloro-2,6-diaminopyrimidine, 98% 156-83-2
4-Heptylphenol, 98% (Titr.) 1987-50-4
Tetracosanol 99+% 506-51-4
4-Maleimido-Tempo,Free Radical 15178-63-9
2-Chloroethyl ethyl sulfide, 95% 693-07-2
Titanium (II) Hydride, 98% 7704-98-5
Phenyl Salicylate 118-55-8
Rhodanine, 99% 141-84-4
3,4-Dichlorophenyl Isocyanate, 99+% (GC) 102-36-3

Free MSDS Search ( Providing 250,000+ Material Properties )
Chemcas.com| Ads link:todaystock.net