Search   
MSDS 
:
 Sodium Nitroprusside
CAS 
:
 14402-89-2
SYNONYMS 
:
 Disodium nitrosylpentacyanoferrate; nipride;     nitroprussidnatrium;sodium nitroprussate
**** SECTION 2 - COMPOSITION, INFORMATION ON INGREDIENTS ****

+----------------+--------------------------------------+----------+-----------+
| CAS# | Chemical Name | % | EINECS# |
|----------------|--------------------------------------|----------|-----------|
| 14402-89-2 |Sodium nitroprusside | 100 | 238-373-9 |
+----------------+--------------------------------------+----------+-----------+
Hazard Symbols: T+
Risk Phrases: 28 36

**** SECTION 3 - HAZARDS IDENTIFICATION ****

EMERGENCY OVERVIEW
Very toxic if swallowed. Irritating to eyes.Toxic.

Potential Health Effects
Eye:
May cause eye irritation.
Skin:
May cause skin irritation.
Ingestion:
Harmful if swallowed. May cause irritation of the digestive tract.
The toxicological properties of this substance have not been fully
investigated.
Inhalation:
Dust is irritating to the respiratory tract. May cause cardiac
abnormalities.
Chronic:
No information found.

**** SECTION 4 - FIRST AID MEASURES ****

Eyes:
Flush eyes with plenty of water for at least 15 minutes,
occasionally lifting the upper and lower lids. Get medical aid.
Skin:
Flush skin with plenty of soap and water for at least 15 minutes
while removing contaminated clothing and shoes. Get medical aid if
irritation develops or persists.
Ingestion:
If victim is conscious and alert, give 2-4 cupfuls of milk or water.
Get medical aid immediately.
Inhalation:
Get medical aid immediately. Remove from exposure to fresh air
immediately. If not breathing, give artificial respiration. If
breathing is difficult, give oxygen.
Notes to Physician:
None
Antidote:
None reported

**** SECTION 5 - FIRE FIGHTING MEASURES ****

General Information:
As in any fire, wear a self-contained breathing apparatus in
pressure-demand, MSHA/NIOSH (approved or equivalent), and full
protective gear.
Extinguishing Media:
For small fires, use dry chemical, carbon dioxide, water spray or
alcohol-resistant foam.
Autoignition Temperature: Not applicable.
Flash Point: Not applicable.
NFPA Rating: Not published.
Explosion Limits, Lower: Not available.
Upper: Not available.

**** SECTION 6 - ACCIDENTAL RELEASE MEASURES ****

General Information: Use proper personal protective equipment as indicated
in Section 8.
Spills/Leaks:
Sweep up, then place into a suitable container for disposal. Avoid
generating dusty conditions.

**** SECTION 7 - HANDLING and STORAGE ****

Handling:
Wash thoroughly after handling. Wash hands before eating. Use only
in a well ventilated area. Minimize dust generation and accumulation.
Avoid ingestion and inhalation.
Storage:
Store in a cool, dry place.

**** SECTION 8 - EXPOSURE CONTROLS, PERSONAL PROTECTION ****

Engineering Controls:
Use adequate general or local exhaust ventilation to keep airborne
concentrations below the permissible exposure limits.
Personal Protective Equipment

Eyes:
Wear appropriate protective eyeglasses or chemical
safety goggles as described by OSHA's eye and face
protection regulations in 29 CFR 1910.133.
Skin:
Wear appropriate gloves to prevent skin exposure.
Clothing:
Wear appropriate protective clothing to minimize
contact with skin.
Respirators:
Follow the OSHA respirator regulations found in 29CFR
1910.134. Always use a NIOSH-approved respirator when
necessary.

**** SECTION 9 - PHYSICAL AND CHEMICAL PROPERTIES ****

Physical State: Solid
Appearance: clear dark red
Odor: Not available.
pH: Not available.
Vapor Pressure: Not applicable.
Vapor Density: Not available.
Evaporation Rate: Not applicable.
Viscosity: Not applicable.
Boiling Point: Not available.
Freezing/Melting Point: Not available.
Decomposition Temperature: Not available.
Solubility: 40% @ 20 C
Specific Gravity/Density: 1.72
Molecular Formula: C5FeN6Na2O
Molecular Weight: 261.8662

**** SECTION 10 - STABILITY AND REACTIVITY ****

Chemical Stability:
Stable under normal temperatures and pressures.
Conditions to Avoid:
Dust generation.
Incompatibilities with Other Materials:
Strong oxidizing agents.
Hazardous Decomposition Products:
Nitrogen oxides, carbon monoxide, carbon dioxide, toxic fumes of
sodium oxide.
Hazardous Polymerization: Has not been reported.

**** SECTION 11 - TOXICOLOGICAL INFORMATION ****

RTECS#:
CAS# 14402-89-2: LJ8750000
LD50/LC50:
CAS# 14402-89-2: Oral, mouse: LD50 = 61 mg/kg; Oral, rabbit: LD50 =
34 mg/kg; Oral, rat: LD50 = 99 mg/kg.
Carcinogenicity:
Sodium nitroprusside -
Not listed by ACGIH, IARC, NIOSH, NTP, or OSHA.
Other:
See actual entry in RTECS for complete information.

**** SECTION 12 - ECOLOGICAL INFORMATION ****

For further information, contact Fisher Scientific.

**** SECTION 13 - DISPOSAL CONSIDERATIONS ****

Dispose of in a manner consistent with federal, state, and local regulations.

**** SECTION 14 - TRANSPORT INFORMATION ****

CDG/CPL
Shipping Name: TOXIC SOLID, INORGANIC, NOS (Sodium nitroprusside)
Hazard Class: 6.1
UN Number: 3288
Packing Group: II
IMO
No information available.
IATA
No information available.
RID/ADR
No information available.
Canadian TDG
Shipping Name: POISONOUS SOLIDS NOS (SODIUM NITROPRUSSIDE)
Hazard Class: 6.1(9.2)
UN Number: UN2811

**** SECTION 15 - REGULATORY INFORMATION ****

European/International Regulations
European Labeling in Accordance with EC Directives
Hazard Symbols: T+
Risk Phrases:
R 28 Very toxic if swallowed.
R 36 Irritating to eyes.
Safety Phrases:
S 26 In case of contact with eyes, rinse immediately
with plenty of water and seek medical advice.
S 45 In case of accident of if you feel unwell, seek
medical advice immediately (show the label where
possible).
WGK (Water Danger/Protection)
CAS# 14402-89-2:
Canada
CAS# 14402-89-2 is listed on Canada's DSL/NDSL List.
This product has a WHMIS classification of D1B, D2B.
CAS# 14402-89-2 is not listed on Canada's Ingredient Disclosure List.
Exposure Limits
US FEDERAL
TSCA
CAS# 14402-89-2 is listed on the TSCA inventory.

**** SECTION 16 - ADDITIONAL INFORMATION ****

MSDS Creation Date: 10/05/1995 Revision #6 Date: 12/12/1997

The information above is believed to be accurate and represents the best
information currently available to us. However, we make no warranty of
merchantability or any other warranty, express or implied, with respect to
such information, and we assume no liability resulting from its use. Users
should make their own investigations to determine the suitability of the
information for their particular purposes. In no way shall Fisher be liable
for any claims, losses, or damages of any third party or for lost profits
or any special, indirect, incidental, consequential or exemplary
damages, howsoever arising, even if Fisher has been advised of
the possibility of such damages.
--------------------------------------------------------------------------------


Search More   
ALL MSDS PAGES IN THIS GROUP
NAMECAS
Tridecanenitrile, 98% 629-60-7
Nitrosylsulfuric acid (40% in 87% sulfuric acid), 40% 7664-93-9
Nickel Cyclohexanebutyrate, min. 13.5%Ni 3906-55-6
4-Aminophenyl Sulfone, 97% 80-08-0
5-Fluorosalicylic Acid, 99% 345-16-4
4'-Bromo-3'-Nitroacetophenone, 99+%(TLC) 18640-58-9
1,3,5-Triethylhexahydro-S-Triazine, 97% 7779-27-3
Indole-3-Carbinol Hydrate, 99% 123334-15-6
3,5,5-Trimethylhexanoic acid, 95%(gc) 3302-10-1
3,4-Dimethoxybenzoic Acid, 99+% 93-07-2
2-Ethynylpyridine, 98+% 1945-84-2
Nitromethane 75-52-5
3,7-Dimethyl-2,6-Octadienenitrile, 97%, (Mixture of Isomers) 5146-66-7
Rhodium (III) Chloride, Anhydrous 10049-07-7
Methyl 4-Amino-1-Benzyl-1,2,5,6-Tetrahydropyridine-3-Carboxylate, 99% 0-01-1
Ruthenium on carbon 5% ruthenium, ca. 50% moisture
5-Chloro-2-nitrobenzotrifluoride, 99% 118-79-6
4-Iodotoluene, 98% 624-31-7
Sodium Nitroprusside 14402-89-2
1,2,4-Butanetriol, 95% 3068-00-6
Ethyl dichlorophosphite, 98% 1498-42-6
L-(-)-Malic Acid, Disodium Salt Monohydrate, 98% 64887-73-6
Riboflavin 5'-Phosphate Sodium Salt, Dihydrate, 73.0-79.0% (on Dry 6184-17-4
3-Fluorophthalic anhydride, 98% 652-39-1
2,4-Thiazolidinedione, 99% 2295-31-0
Tris-Phosphate, 98% 6992-39-8
Mercurochrome, 24-27% Mercury (corrected for volatiles) 129-16-8
3-Bromophenylhydrazine Hydrochloride, 98% 27246-81-7
1,2-Diiodoethane, 99% 624-60-2
4-Methylbenzhydrol, 98% 1517-63-1
2-Propoxyethanol, 98% (gc) 2807-30-9
3,5-Dimethyl-p-anisic acid, 98% 21553-46-8
n-Methylisatin 3-(thiosemicarbazone), 96% 1910-68-5
Benzeneseleninic anhydride, 98% 17697-12-0
Sodium Sulfide Hydrate, 60-62%, scales 27610-45-3
N-(2-Chloroethyl)benzamide, 99% 26385-07-9
2-Chlorophenyl isothiocyanate, 99% 2740-81-0
4-Indanol, 98% 1641-41-4
1,4-Thioxane, 98% 15980-15-1
Quinine, anhydrous, 99% (titr) 130-95-0
Potassium Phosphate, Dibasic Trihydrate, 99+% 16788-57-1
Benzyl Methyl Sulfide, 98% 766-92-7
5-Nitro-2-furaldehyde, 99% 698-63-5
o-Cresol, 99+% (gc) 95-48-7
(+)-Octopine 34522-32-2
o-Dichlorobenzene 95-50-1
5,7-Dichloro-8-Hydroxyquinoline, 99% 773-76-2
3,3,5,5-Tetramethylcyclohexanol, 96% 2650-40-0
Pentafluoropyridine, 99+% 700-16-3
Perfluoro-1-iodohexane, 99% 355-43-1

Free MSDS Search ( Providing 250,000+ Material Properties )
Chemcas.com| Ads link:todaystock.net