**** SECTION 2 - COMPOSITION, INFORMATION ON INGREDIENTS ****
+----------------+--------------------------------------+----------+-----------+
| CAS# | Chemical Name | % | EINECS# |
|----------------|--------------------------------------|----------|-----------|
| 1498-42-6 |Ethyl dichlorophosphate | 98 | 216-098-5 |
+----------------+--------------------------------------+----------+-----------+
Hazard Symbols: F C
Risk Phrases: 11 34
**** SECTION 3 - HAZARDS IDENTIFICATION ****
EMERGENCY OVERVIEW
Highly flammable. Causes burns.Corrosive.Moisture sensitive.
Potential Health Effects
Eye:
Causes eye burns. May cause chemical conjunctivitis and corneal
damage.
Skin:
Causes skin burns. May cause cyanosis of the extremities. May cause
skin rash (in milder cases), and cold and clammy skin with cyanosis
or pale color.
Ingestion:
May cause severe and permanent damage to the digestive tract. Causes
gastrointestinal tract burns. May cause perforation of the digestive
tract. Ingestion of large amounts may cause CNS depression. May
cause systemic effects.
Inhalation:
Causes chemical burns to the respiratory tract. Aspiration may lead
to pulmonary edema. Vapors may cause dizziness or suffocation. May
cause systemic effects. May cause burning sensation in the chest.
Chronic:
Effects may be delayed.
**** SECTION 4 - FIRST AID MEASURES ****
Eyes:
Flush eyes with plenty of water for at least 15 minutes,
occasionally lifting the upper and lower eyelids. Get medical aid
immediately. Do NOT allow victim to rub eyes or keep eyes closed.
Extensive irrigation with water is required (at least 30 minutes).
Skin:
Get medical aid immediately. Immediately flush skin with plenty of
water for at least 15 minutes while removing contaminated clothing
and shoes. Wash clothing before reuse. Destroy contaminated shoes.
Ingestion:
Never give anything by mouth to an unconscious person. Get medical
aid immediately. Do NOT induce vomiting. If conscious and alert,
rinse mouth and drink 2-4 cupfuls of milk or water.
Inhalation:
Get medical aid immediately. Remove from exposure and move to fresh
air immediately. If breathing is difficult, give oxygen. Do not use
mouth-to-mouth resuscitation if victim ingested or inhaled the
substance; induce artificial respiration with the aid of a pocket
mask equipped with a one-way valve or other proper respiratory
medical device.
Notes to Physician:
**** SECTION 5 - FIRE FIGHTING MEASURES ****
General Information:
As in any fire, wear a self-contained breathing apparatus in
pressure-demand, MSHA/NIOSH (approved or equivalent), and full
protective gear. Vapors may form an explosive mixture with air.
Vapors can travel to a source of ignition and flash back. During a
fire, irritating and highly toxic gases may be generated by thermal
decomposition or combustion. Will burn if involved in a fire. Use
water spray to keep fire-exposed containers cool. Containers may
explode in the heat of a fire. Flammable liquid and vapor. Vapors
may be heavier than air. They can spread along the ground and
collect in low or confined areas. Water hydrolyzes material
liberating acidic gas which in contact with metal surfaces can
generate flammable and/or explosive hydrogen gas.
Extinguishing Media:
Use water spray to cool fire-exposed containers. Use dry chemical,
carbon dioxide, or alcohol-resistant foam. DO NOT USE WATER! Do NOT
get water inside containers.
**** SECTION 6 - ACCIDENTAL RELEASE MEASURES ****
General Information: Use proper personal protective equipment as indicated
in Section 8.
Spills/Leaks:
Absorb spill with inert material (e.g. vermiculite, sand or earth),
then place in suitable container. Avoid runoff into storm sewers and
ditches which lead to waterways. Remove all sources of ignition. Use
a spark-proof tool. Provide ventilation. Do not get water inside
containers. A vapor suppressing foam may be used to reduce vapors.
**** SECTION 7 - HANDLING and STORAGE ****
Handling:
Wash thoroughly after handling. Remove contaminated clothing and
wash before reuse. Ground and bond containers when transferring
material. Use spark-proof tools and explosion proof equipment. Do not
get in eyes, on skin, or on clothing. Empty containers retain product
residue, (liquid and/or vapor), and can be dangerous. Keep away from
heat, sparks and flame. Do not ingest or inhale. Do not allow
contact with water. Do not pressurize, cut, weld, braze, solder,
drill, grind, or expose empty containers to heat, sparks or open
flames. Keep from contact with moist air and steam.
Storage:
Keep away from heat, sparks, and flame. Store in a tightly closed
container. Flammables-area. Store protected from moisture. Store in
a cool, dry area away from incompatible substances.
**** SECTION 8 - EXPOSURE CONTROLS, PERSONAL PROTECTION ****
Engineering Controls:
Facilities storing or utilizing this material should be equipped
with an eyewash facility and a safety shower. Use adequate general or
local explosion-proof ventilation to keep airborne levels to
acceptable levels.
Exposure Limits
CAS# 1498-42-6:
Personal Protective Equipment
Eyes:
Wear appropriate protective eyeglasses or chemical
safety goggles as described by OSHA's eye and face
protection regulations in 29 CFR 1910.133 or European
Standard EN166.
Skin:
Wear appropriate protective gloves to prevent skin
exposure.
Clothing:
Wear appropriate protective clothing to prevent skin
exposure.
Respirators:
A respiratory protection program that meets OSHA's 29
CFR 1910.134 and ANSI Z88.2 requirements or European
Standard EN 149 must be followed whenever workplace
conditions warrant respirator use.
**** SECTION 9 - PHYSICAL AND CHEMICAL PROPERTIES ****
Physical State: Liquid
Color: clear, colorless
Odor: none reported
pH: Not available.
Vapor Pressure: Not available.
Viscosity: Not available.
Boiling Point: 117.0 - 118.0 deg C @ 760.00m
Freezing/Melting Point: Not available.
Autoignition Temperature: Not applicable.
Flash Point: 4 deg C ( 39.20 deg F)
Explosion Limits, lower: Not available.
Explosion Limits, upper: Not available.
Decomposition Temperature: Not available.
Solubility in water: Not available.
Specific Gravity/Density: 1.2860g/cm3
Molecular Formula: C2H5Cl2OP
Molecular Weight: 146.94
**** SECTION 10 - STABILITY AND REACTIVITY ****
Chemical Stability:
Stable under normal temperatures and pressures. May decompose on
exposure to moist air or water.
Conditions to Avoid:
Incompatible materials, ignition sources, moisture, excess heat,
strong oxidants.
Incompatibilities with Other Materials:
Moisture, water, strong oxidizing agents, strong bases.
Hazardous Decomposition Products:
Hydrogen chloride, phosphine, carbon monoxide, oxides of phosphorus,
irritating and toxic fumes and gases, carbon dioxide.
Hazardous Polymerization: Has not been reported
**** SECTION 11 - TOXICOLOGICAL INFORMATION ****
RTECS#:
CAS# 1498-42-6 unlisted.
LD50/LC50:
Not available.
Carcinogenicity:
Ethyl dichlorophosphate -
Not listed by ACGIH, IARC, or NTP.
**** SECTION 12 - ECOLOGICAL INFORMATION ****
**** SECTION 13 - DISPOSAL CONSIDERATIONS ****
Dispose of in a manner consistent with federal, state, and local regulations.
**** SECTION 14 - TRANSPORT INFORMATION ****
IATA
Shipping Name: FLAMMABLE LIQUID, CORROSIVE, N.O.S.*
Hazard Class: 3 (8)
UN Number: 2924
Packing Group: II
IMO
Shipping Name: FLAMMABLE LIQUID, CORROSIVE, N.O.S.
Hazard Class: 3.1 (8)
UN Number: 2924
Packing Group: II
RID/ADR
Shipping Name: FLAMMABLE LIQUID, CORROSIVE, N.O.S.
Hazard Class: 3
UN Number: 2924
Packing group: II
**** SECTION 15 - REGULATORY INFORMATION ****
European/International Regulations
European Labeling in Accordance with EC Directives
Hazard Symbols: F C
Risk Phrases:
R 11 Highly flammable.
R 34 Causes burns.
Safety Phrases:
S 16 Keep away from sources of ignition - No
smoking.
S 24/25 Avoid contact with skin and eyes.
WGK (Water Danger/Protection)
CAS# 1498-42-6: No information available.
Canada
None of the chemicals in this product are listed on the DSL/NDSL list.
CAS# 1498-42-6 is not listed on Canada's Ingredient Disclosure List.
US FEDERAL
TSCA
CAS# 1498-42-6 is not listed on the TSCA inventory.
It is for research and development use only.
**** SECTION 16 - ADDITIONAL INFORMATION ****
MSDS Creation Date: 9/02/1997 Revision #6 Date: 3/18/2003
The information above is believed to be accurate and represents the best
information currently available to us. However, we make no warranty of
merchantability or any other warranty, express or implied, with respect to
such information, and we assume no liability resulting from its use. Users
should make their own investigations to determine the suitability of the
information for their particular purposes. In no way shall the company be
liable for any claims, losses, or damages of any third party or for lost
profits or any special, indirect, incidental, consequential or exemplary
damages, howsoever arising, even if the company has been advised of
the possibility of such damages.
--------------------------------------------------------------------------------
--------------------------------------------------------------------------------
|
|
|
| ALL MSDS PAGES IN THIS GROUP
| | NAME | CAS |
|
Tridecanenitrile, 98%
| 629-60-7 |
|
Nitrosylsulfuric acid (40% in 87% sulfuric acid), 40%
| 7664-93-9 |
|
Nickel Cyclohexanebutyrate, min. 13.5%Ni
| 3906-55-6 |
|
4-Aminophenyl Sulfone, 97%
| 80-08-0 |
|
5-Fluorosalicylic Acid, 99%
| 345-16-4 |
|
4'-Bromo-3'-Nitroacetophenone, 99+%(TLC)
| 18640-58-9 |
|
1,3,5-Triethylhexahydro-S-Triazine, 97%
| 7779-27-3 |
|
Indole-3-Carbinol Hydrate, 99%
| 123334-15-6 |
|
3,5,5-Trimethylhexanoic acid, 95%(gc)
| 3302-10-1 |
|
3,4-Dimethoxybenzoic Acid, 99+%
| 93-07-2 |
|
2-Ethynylpyridine, 98+%
| 1945-84-2 |
|
Nitromethane
| 75-52-5 |
|
3,7-Dimethyl-2,6-Octadienenitrile, 97%, (Mixture of Isomers)
| 5146-66-7 |
|
Rhodium (III) Chloride, Anhydrous
| 10049-07-7 |
|
Methyl 4-Amino-1-Benzyl-1,2,5,6-Tetrahydropyridine-3-Carboxylate, 99%
| 0-01-1 |
|
Ruthenium on carbon 5% ruthenium, ca. 50% moisture
| |
|
5-Chloro-2-nitrobenzotrifluoride, 99%
| 118-79-6 |
|
4-Iodotoluene, 98%
| 624-31-7 |
|
Sodium Nitroprusside
| 14402-89-2 |
|
1,2,4-Butanetriol, 95%
| 3068-00-6 |
|
Ethyl dichlorophosphite, 98%
| 1498-42-6 |
|
L-(-)-Malic Acid, Disodium Salt Monohydrate, 98%
| 64887-73-6 |
|
Riboflavin 5'-Phosphate Sodium Salt, Dihydrate, 73.0-79.0% (on Dry
| 6184-17-4 |
|
3-Fluorophthalic anhydride, 98%
| 652-39-1 |
|
2,4-Thiazolidinedione, 99%
| 2295-31-0 |
|
Tris-Phosphate, 98%
| 6992-39-8 |
|
Mercurochrome, 24-27% Mercury (corrected for volatiles)
| 129-16-8 |
|
3-Bromophenylhydrazine Hydrochloride, 98%
| 27246-81-7 |
|
1,2-Diiodoethane, 99%
| 624-60-2 |
|
4-Methylbenzhydrol, 98%
| 1517-63-1 |
|
2-Propoxyethanol, 98% (gc)
| 2807-30-9 |
|
3,5-Dimethyl-p-anisic acid, 98%
| 21553-46-8 |
|
n-Methylisatin 3-(thiosemicarbazone), 96%
| 1910-68-5 |
|
Benzeneseleninic anhydride, 98%
| 17697-12-0 |
|
Sodium Sulfide Hydrate, 60-62%, scales
| 27610-45-3 |
|
N-(2-Chloroethyl)benzamide, 99%
| 26385-07-9 |
|
2-Chlorophenyl isothiocyanate, 99%
| 2740-81-0 |
|
4-Indanol, 98%
| 1641-41-4 |
|
1,4-Thioxane, 98%
| 15980-15-1 |
|
Quinine, anhydrous, 99% (titr)
| 130-95-0 |
|
Potassium Phosphate, Dibasic Trihydrate, 99+%
| 16788-57-1 |
|
Benzyl Methyl Sulfide, 98%
| 766-92-7 |
|
5-Nitro-2-furaldehyde, 99%
| 698-63-5 |
|
o-Cresol, 99+% (gc)
| 95-48-7 |
|
(+)-Octopine
| 34522-32-2 |
|
o-Dichlorobenzene
| 95-50-1 |
|
5,7-Dichloro-8-Hydroxyquinoline, 99%
| 773-76-2 |
|
3,3,5,5-Tetramethylcyclohexanol, 96%
| 2650-40-0 |
|
Pentafluoropyridine, 99+%
| 700-16-3 |
|
Perfluoro-1-iodohexane, 99%
| 355-43-1 |
|
|