Search   
MSDS 
:
 Alizarin Yellow R Sodium Salt, 96% (UV-VIS)
CAS 
:
 1718-34-9
SYNONYMS 
:
 Alizarian Yellow R Sodium Salt; 5-(P-Nitrophenylazo) Salicylic Acid     Sodium Salt; Sodium P-Nitrobenzeneazosalicylate.
**** SECTION 2 - COMPOSITION, INFORMATION ON INGREDIENTS ****

+----------------+--------------------------------------+----------+-----------+
| CAS# | Chemical Name | % | EINECS# |
|----------------|--------------------------------------|----------|-----------|
| 1718-34-9 |Alizarin Yellow R Sodium Salt | 96 | 217-002-4 |
+----------------+--------------------------------------+----------+-----------+
Hazard Symbols: None Listed.
Risk Phrases: None Listed.

**** SECTION 3 - HAZARDS IDENTIFICATION ****

EMERGENCY OVERVIEW
Not available.

Potential Health Effects
Eye:
May cause eye irritation.
Skin:
May cause skin irritation.
Ingestion:
May cause gastrointestinal irritation with nausea, vomiting and
diarrhea. The toxicological properties of this substance have not
been fully investigated.
Inhalation:
May cause respiratory tract irritation. The toxicological properties
of this substance have not been fully investigated.
Chronic:
No information found.

**** SECTION 4 - FIRST AID MEASURES ****

Eyes:
Immediately flush eyes with plenty of water for at least 15 minutes,
occasionally lifting the upper and lower eyelids. Get medical aid.
Skin:
Immediately flush skin with plenty of water for at least 15 minutes
while removing contaminated clothing and shoes. Get medical aid if
irritation develops or persists.
Ingestion:
Do not induce vomiting. If victim is conscious and alert, give 2-4
cupfuls of milk or water. Never give anything by mouth to an
unconscious person. Get medical aid immediately.
Inhalation:
Remove from exposure and move to fresh air immediately. If not
breathing, give artificial respiration. If breathing is difficult,
give oxygen. Get medical aid.
Notes to Physician:

**** SECTION 5 - FIRE FIGHTING MEASURES ****

General Information:
As in any fire, wear a self-contained breathing apparatus in
pressure-demand, MSHA/NIOSH (approved or equivalent), and full
protective gear. During a fire, irritating and highly toxic gases
may be generated by thermal decomposition or combustion.
Extinguishing Media:
For small fires, use dry chemical, carbon dioxide, water spray or
alcohol-resistant foam. For large fires, use dry chemical, carbon
dioxide, alcohol-resistant foam, or water spray.

**** SECTION 6 - ACCIDENTAL RELEASE MEASURES ****

General Information: Use proper personal protective equipment as indicated
in Section 8.
Spills/Leaks:
Vacuum or sweep up material and place into a suitable disposal
container. Clean up spills immediately, observing precautions in the
Protective Equipment section. Avoid generating dusty conditions.
Provide ventilation.

**** SECTION 7 - HANDLING and STORAGE ****

Handling:
Wash thoroughly after handling. Remove contaminated clothing and
wash before reuse. Use with adequate ventilation. Minimize dust
generation and accumulation. Do not get in eyes, on skin, or on
clothing. Do not ingest or inhale.
Storage:
Store in a cool, dry place. Store in a tightly closed container.

**** SECTION 8 - EXPOSURE CONTROLS, PERSONAL PROTECTION ****

Engineering Controls:
Facilities storing or utilizing this material should be equipped
with an eyewash facility and a safety shower. Use adequate
ventilation to keep airborne concentrations low.
Exposure Limits
CAS# 1718-34-9:


Personal Protective Equipment

Eyes:
Wear appropriate protective eyeglasses or chemical
safety goggles as described by OSHA's eye and face
protection regulations in 29 CFR 1910.133 or European
Standard EN166.
Skin:
Wear appropriate gloves to prevent skin exposure.
Clothing:
Wear appropriate protective clothing to prevent skin
exposure.
Respirators:
Follow the OSHA respirator regulations found in 29
CFR 1910.134 or European Standard EN 149. Use a
NIOSH/MSHA or European Standard EN 149 approved
respirator if exposure limits are exceeded or if
irritation or other symptoms are experienced.

**** SECTION 9 - PHYSICAL AND CHEMICAL PROPERTIES ****

Physical State: Solid
Color: brown yellow, red brown or brown
Odor: Odorless
pH: Not available.
Vapor Pressure: Negligible
Viscosity: Not available.
Boiling Point: Decomposes
Freezing/Melting Point: 482 deg F
Autoignition Temperature: Not applicable.
Flash Point: Not applicable.
Explosion Limits, lower: Not available.
Explosion Limits, upper: Not available.
Decomposition Temperature: Not available.
Solubility in water: Soluble in water
Specific Gravity/Density: >1.0
Molecular Formula: 4NO2C6H4N2C6H3C3Na1203H3
Molecular Weight: 635.1811

**** SECTION 10 - STABILITY AND REACTIVITY ****

Chemical Stability:
Stable under normal temperatures and pressures.
Conditions to Avoid:
Incompatible materials, dust generation, excess heat.
Incompatibilities with Other Materials:
Strong oxidizing agents
Hazardous Decomposition Products:
Nitrogen oxides, carbon monoxide, irritating and toxic fumes and
gases, carbon dioxide.
Hazardous Polymerization: Has not been reported.

**** SECTION 11 - TOXICOLOGICAL INFORMATION ****

RTECS#:
CAS# 1718-34-9: DH2528600
LD50/LC50:
Not available.
Carcinogenicity:
Alizarin Yellow R Sodium Salt -
Not listed by ACGIH, IARC, or NTP.
Other:
See actual entry in RTECS for complete information.

**** SECTION 12 - ECOLOGICAL INFORMATION ****



**** SECTION 13 - DISPOSAL CONSIDERATIONS ****

Dispose of in a manner consistent with federal, state, and local regulations.

**** SECTION 14 - TRANSPORT INFORMATION ****

IATA
Not regulated as a hazardous material.
IMO
Not regulated as a hazardous material.
RID/ADR
Not regulated as a hazardous material.

**** SECTION 15 - REGULATORY INFORMATION ****

European/International Regulations
European Labeling in Accordance with EC Directives
Hazard Symbols: Not available.
Risk Phrases:
Safety Phrases:
WGK (Water Danger/Protection)
CAS# 1718-34-9: No information available.
Canada
CAS# 1718-34-9 is listed on Canada's DSL List.
CAS# 1718-34-9 is not listed on Canada's Ingredient Disclosure List.
US FEDERAL
TSCA
CAS# 1718-34-9 is listed on the TSCA inventory.

**** SECTION 16 - ADDITIONAL INFORMATION ****

MSDS Creation Date: 6/15/1998 Revision #3 Date: 3/18/2003

The information above is believed to be accurate and represents the best
information currently available to us. However, we make no warranty of
merchantability or any other warranty, express or implied, with respect to
such information, and we assume no liability resulting from its use. Users
should make their own investigations to determine the suitability of the
information for their particular purposes. In no way shall the company be
liable for any claims, losses, or damages of any third party or for lost
profits or any special, indirect, incidental, consequential or exemplary
damages, howsoever arising, even if the company has been advised of
the possibility of such damages.
--------------------------------------------------------------------------------
--------------------------------------------------------------------------------
Search More   
ALL MSDS PAGES IN THIS GROUP
NAMECAS
3-Dimethylaminoacrylonitrile, 99% 2407-68-3
(-)-8-Phenylmenthol, 98% 65253-04-5
4-Nitrophenyl Phosphate, Bis-(Cyclohexyl- Ammonium) Salt, 99+% 14545-82-5
3,3,5-Trimethylcyclohexanol,98% Mixture of Cis and Trans 116-02-9
L(-)-Phenylephrine Hydrochloride, 99% 61-76-7
(S)-(+)-2-Chloropropan-1-ol, 96% 19210-21-0
Dimethylthexylsilyl Chloride 67373-56-2
DL-Alanine, 99% 302-72-7
(-)-Menthyl lactate, 98% 59259-38-0
1,1-Diphenyl-2-Picrylhydrazine 1707-75-1
9-Nitroanthracene, 97% 602-60-8
Cis-Stilbene, 97% 645-49-8
2-Fluorobenzoyl Chloride, 97% 393-52-2
Alizarin Yellow R Sodium Salt, 96% (UV-VIS) 1718-34-9
Phenyl carbamate, 97% 622-46-8
m-Methoxybenzyl chloride, 97% 824-98-6
Methyl Violet 2B, Indicator Grade 8004-87-3
4,7-Diphenyl-1,10-Phenanthroline, 99% (UV-Vis) 1662-01-7
4'-Fluoro-2'-nitroacetanilide, 99+% 448-39-5
DL-2-Amino-4-Pentenoic Acid, 99+% 7685-44-1
4-Chloro-3,5-Dinitrobenzonitrile, 94% (GC) 1930-72-9
(n-Butyl)triphenylphosphonium bromide, 99% 1779-51-7
L-Tyrosine-D11 39748-77-1
Dimethyl pimelate, 99% 1732-08-7
Decahydronaphthalene-d18, 99.5 atom % D 91-17-8
4,4'-Dimethoxybiphenyl, 98% 2132-80-1
4-Bromo-N,N-Dimethylaniline, 99% 586-77-6
n-Benzylethanolamine, 96% (gc) 104-63-2
Dioctyl phenylphosphonate 98% 1754-47-8
4-Nitrobenzenesulfonyl chloride, 95% (titr.) 98-74-8
1,4-Diisopropylbenzene, 99% 100-18-5
4,4'-bis(pentyloxy)azoxybenzene 19482-05-4
Benzyl Cinnamate, 99% 103-41-3
4'-Methoxybutyrophenone, Tech., 93% (GC) 4160-51-4
2,2,5,5-Tetramethyl-3-Imidazoline-1-Oxyl-Carboxylic Acid, Sodium 0-00-0
2-Ethylaniline, 98% 578-54-1
1-Amino-4-methylpiperazine, 99% 6928-85-4
Squalane, 99% 111-01-3
Triphenylcarbenium hexachloroantimonate, 98% 1586-91-0
3-(Trifluoromethyl)-Cinnamic Acid, 98% 779-89-5
3-Pentyn-1-ol, 99% 10229-10-4
Rhodium Acetate Dimer, Anhydrous,ca 46% Rh 5503-41-3
Diethyl Carbonate, P.A. 105-58-8
Methyl 3-oxo-pentanoate, 98% 30414-53-0
Ethyl 3-hydroxybutyrate, 99% 5405-41-4
4-Propylaniline, 98% 2696-84-6
2'-Fluoro-4'-Methoxyacetophenone, 99% 74457-86-6
Lithiumtriethylborodeuteride, 1M solution in THF 109-99-9
2-Chlorobenzotrifluoride, 99% 88-16-4
1-Chloro-1-phenylethane, 99% 672-65-1

Free MSDS Search ( Providing 250,000+ Material Properties )
Chemcas.com| Ads link:todaystock.net