Search   
MSDS 
:
 4-Nitrobenzenesulfonyl chloride, 95% (titr.)
CAS 
:
 98-74-8
SYNONYMS 
:
 
**** SECTION 2 - COMPOSITION, INFORMATION ON INGREDIENTS ****

+----------------+--------------------------------------+----------+-----------+
| CAS# | Chemical Name | % | EINECS# |
|----------------|--------------------------------------|----------|-----------|
| 98-74-8 |4-Nitrobenzenesulfonyl chloride (titr.| 95 | 202-697-9 |
| |) | | |
+----------------+--------------------------------------+----------+-----------+
Hazard Symbols: C
Risk Phrases: 34

**** SECTION 3 - HAZARDS IDENTIFICATION ****

EMERGENCY OVERVIEW
Causes burns.Moisture sensitive.Corrosive.

Potential Health Effects
Eye:
Causes eye burns.
Skin:
Causes skin burns.
Ingestion:
Causes gastrointestinal tract burns.
Inhalation:
Causes chemical burns to the respiratory tract. Effects of
inhalation may be delayed.
Chronic:
No information found.

**** SECTION 4 - FIRST AID MEASURES ****

Eyes:
Flush eyes with plenty of water for at least 15 minutes,
occasionally lifting the upper and lower eyelids. Get medical aid
immediately. Do NOT allow victim to rub eyes or keep eyes closed.
Extensive irrigation with water is required (at least 30 minutes).
Skin:
Get medical aid. Immediately flush skin with plenty of water for at
least 15 minutes while removing contaminated clothing and shoes.
Wash clothing before reuse. Discard contaminated clothing in a manner
which limits further exposure. Remove contaminated clothing and
shoes. Destroy contaminated shoes.
Ingestion:
Do not induce vomiting. If victim is conscious and alert, give 2-4
cupfuls of milk or water. Never give anything by mouth to an
unconscious person. Get medical aid immediately.
Inhalation:
Get medical aid immediately. Remove from exposure and move to fresh
air immediately. If breathing is difficult, give oxygen. Do NOT use
mouth-to-mouth resuscitation. If breathing has ceased apply
artificial respiration using oxygen and a suitable mechanical device
such as a bag and a mask.
Notes to Physician:

**** SECTION 5 - FIRE FIGHTING MEASURES ****

General Information:
As in any fire, wear a self-contained breathing apparatus in
pressure-demand, MSHA/NIOSH (approved or equivalent), and full
protective gear. During a fire, irritating and highly toxic gases
may be generated by thermal decomposition or combustion. Substance
is noncombustible. Contact with metals may evolve flammable hydrogen
gas. Containers may explode when heated.
Extinguishing Media:
Cool containers with flooding quantities of water until well after
fire is out. Use water spray, dry chemical, carbon dioxide, or
alcohol-resistant foam.

**** SECTION 6 - ACCIDENTAL RELEASE MEASURES ****

General Information: Use proper personal protective equipment as indicated
in Section 8.
Spills/Leaks:
Avoid runoff into storm sewers and ditches which lead to waterways.
Clean up spills immediately, observing precautions in the Protective
Equipment section. Sweep up or absorb material, then place into a
suitable clean, dry, closed container for disposal. Avoid generating
dusty conditions. Provide ventilation.

**** SECTION 7 - HANDLING and STORAGE ****

Handling:
Wash thoroughly after handling. Remove contaminated clothing and
wash before reuse. Minimize dust generation and accumulation. Do not
get in eyes, on skin, or on clothing. Keep container tightly closed.
Do not ingest or inhale. Use with adequate ventilation. Discard
contaminated shoes.
Storage:
Store in a tightly closed container. Store in a cool, dry,
well-ventilated area away from incompatible substances. Corrosives
area.

**** SECTION 8 - EXPOSURE CONTROLS, PERSONAL PROTECTION ****

Engineering Controls:
Use adequate ventilation to keep airborne concentrations low.
Exposure Limits
CAS# 98-74-8:


Personal Protective Equipment

Eyes:
Wear appropriate protective eyeglasses or chemical
safety goggles as described by OSHA's eye and face
protection regulations in 29 CFR 1910.133 or European
Standard EN166.
Skin:
Wear appropriate protective gloves to prevent skin
exposure.
Clothing:
Wear appropriate protective clothing to prevent skin
exposure.
Respirators:
Follow the OSHA respirator regulations found in 29
CFR 1910.134 or European Standard EN 149. Use a
NIOSH/MSHA or European Standard EN 149 approved
respirator if exposure limits are exceeded or if
irritation or other symptoms are experienced.

**** SECTION 9 - PHYSICAL AND CHEMICAL PROPERTIES ****

Physical State: Powder
Color: beige
Odor: Not available.
pH: Not available.
Vapor Pressure: Not available.
Viscosity: Not available.
Boiling Point: 143.0 - 144.0 deg C
Freezing/Melting Point: 75.50 - 78.50 deg C
Autoignition Temperature: Not available.
Flash Point: Not available.
Explosion Limits, lower: Not available.
Explosion Limits, upper: Not available.
Decomposition Temperature:
Solubility in water: insoluble
Specific Gravity/Density:
Molecular Formula: C6H4ClNO4S
Molecular Weight: 221.62

**** SECTION 10 - STABILITY AND REACTIVITY ****

Chemical Stability:
Stable under normal temperatures and pressures.
Conditions to Avoid:
Incompatible materials, dust generation, moisture, metals, strong
oxidants.
Incompatibilities with Other Materials:
Strong oxidizing agents, strong bases.
Hazardous Decomposition Products:
Hydrogen chloride, carbon monoxide, oxides of nitrogen, oxides of
sulfur, carbon dioxide.
Hazardous Polymerization: Has not been reported

**** SECTION 11 - TOXICOLOGICAL INFORMATION ****

RTECS#:
CAS# 98-74-8 unlisted.
LD50/LC50:
Not available.
Carcinogenicity:
4-Nitrobenzenesulfonyl chloride (titr.) -
Not listed by ACGIH, IARC, or NTP.

**** SECTION 12 - ECOLOGICAL INFORMATION ****



**** SECTION 13 - DISPOSAL CONSIDERATIONS ****

Dispose of in a manner consistent with federal, state, and local regulations.

**** SECTION 14 - TRANSPORT INFORMATION ****

IATA
Shipping Name: CORROSIVE SOLID, N.O.S.*
Hazard Class: 8
UN Number: 1759
Packing Group: II
IMO
Shipping Name: CORROSIVE SOLID, N.O.S.
Hazard Class: 8
UN Number: 1759
Packing Group: II
RID/ADR
Shipping Name: CORROSIVE SOLID, N.O.S.
Hazard Class: 8
UN Number: 1759
Packing group: II

**** SECTION 15 - REGULATORY INFORMATION ****

European/International Regulations
European Labeling in Accordance with EC Directives
Hazard Symbols: C
Risk Phrases:
R 34 Causes burns.
Safety Phrases:
S 25 Avoid contact with eyes.
S 27 Take off immediately all contaminated clothing.
S 28 After contact with skin, wash immediately
with...
S 28A After contact with skin, wash immediately with
plenty of water.
S 36/37/39 Wear suitable protective clothing, gloves
and eye/face protection.
S 37 Wear suitable gloves.
S 45 In case of accident or if you feel unwell, seek
medical advice immediately (show the label where
possible).
WGK (Water Danger/Protection)
CAS# 98-74-8: No information available.
Canada
CAS# 98-74-8 is listed on Canada's DSL List.
CAS# 98-74-8 is not listed on Canada's Ingredient Disclosure List.
US FEDERAL
TSCA
CAS# 98-74-8 is listed on the TSCA inventory.

**** SECTION 16 - ADDITIONAL INFORMATION ****

MSDS Creation Date: 9/11/1998 Revision #2 Date: 3/18/2003

The information above is believed to be accurate and represents the best
information currently available to us. However, we make no warranty of
merchantability or any other warranty, express or implied, with respect to
such information, and we assume no liability resulting from its use. Users
should make their own investigations to determine the suitability of the
information for their particular purposes. In no way shall the company be
liable for any claims, losses, or damages of any third party or for lost
profits or any special, indirect, incidental, consequential or exemplary
damages, howsoever arising, even if the company has been advised of
the possibility of such damages.
--------------------------------------------------------------------------------
--------------------------------------------------------------------------------
Search More   
ALL MSDS PAGES IN THIS GROUP
NAMECAS
3-Dimethylaminoacrylonitrile, 99% 2407-68-3
(-)-8-Phenylmenthol, 98% 65253-04-5
4-Nitrophenyl Phosphate, Bis-(Cyclohexyl- Ammonium) Salt, 99+% 14545-82-5
3,3,5-Trimethylcyclohexanol,98% Mixture of Cis and Trans 116-02-9
L(-)-Phenylephrine Hydrochloride, 99% 61-76-7
(S)-(+)-2-Chloropropan-1-ol, 96% 19210-21-0
Dimethylthexylsilyl Chloride 67373-56-2
DL-Alanine, 99% 302-72-7
(-)-Menthyl lactate, 98% 59259-38-0
1,1-Diphenyl-2-Picrylhydrazine 1707-75-1
9-Nitroanthracene, 97% 602-60-8
Cis-Stilbene, 97% 645-49-8
2-Fluorobenzoyl Chloride, 97% 393-52-2
Alizarin Yellow R Sodium Salt, 96% (UV-VIS) 1718-34-9
Phenyl carbamate, 97% 622-46-8
m-Methoxybenzyl chloride, 97% 824-98-6
Methyl Violet 2B, Indicator Grade 8004-87-3
4,7-Diphenyl-1,10-Phenanthroline, 99% (UV-Vis) 1662-01-7
4'-Fluoro-2'-nitroacetanilide, 99+% 448-39-5
DL-2-Amino-4-Pentenoic Acid, 99+% 7685-44-1
4-Chloro-3,5-Dinitrobenzonitrile, 94% (GC) 1930-72-9
(n-Butyl)triphenylphosphonium bromide, 99% 1779-51-7
L-Tyrosine-D11 39748-77-1
Dimethyl pimelate, 99% 1732-08-7
Decahydronaphthalene-d18, 99.5 atom % D 91-17-8
4,4'-Dimethoxybiphenyl, 98% 2132-80-1
4-Bromo-N,N-Dimethylaniline, 99% 586-77-6
n-Benzylethanolamine, 96% (gc) 104-63-2
Dioctyl phenylphosphonate 98% 1754-47-8
4-Nitrobenzenesulfonyl chloride, 95% (titr.) 98-74-8
1,4-Diisopropylbenzene, 99% 100-18-5
4,4'-bis(pentyloxy)azoxybenzene 19482-05-4
Benzyl Cinnamate, 99% 103-41-3
4'-Methoxybutyrophenone, Tech., 93% (GC) 4160-51-4
2,2,5,5-Tetramethyl-3-Imidazoline-1-Oxyl-Carboxylic Acid, Sodium 0-00-0
2-Ethylaniline, 98% 578-54-1
1-Amino-4-methylpiperazine, 99% 6928-85-4
Squalane, 99% 111-01-3
Triphenylcarbenium hexachloroantimonate, 98% 1586-91-0
3-(Trifluoromethyl)-Cinnamic Acid, 98% 779-89-5
3-Pentyn-1-ol, 99% 10229-10-4
Rhodium Acetate Dimer, Anhydrous,ca 46% Rh 5503-41-3
Diethyl Carbonate, P.A. 105-58-8
Methyl 3-oxo-pentanoate, 98% 30414-53-0
Ethyl 3-hydroxybutyrate, 99% 5405-41-4
4-Propylaniline, 98% 2696-84-6
2'-Fluoro-4'-Methoxyacetophenone, 99% 74457-86-6
Lithiumtriethylborodeuteride, 1M solution in THF 109-99-9
2-Chlorobenzotrifluoride, 99% 88-16-4
1-Chloro-1-phenylethane, 99% 672-65-1

Free MSDS Search ( Providing 250,000+ Material Properties )
Chemcas.com| Ads link:todaystock.net