Search   
MSDS 
:
 Ethyl phenylpropiolate, 98%
CAS 
:
 2216-94-6
SYNONYMS 
:
 Propiolic acid, phenyl-, ethyl ester; Ethyl     phenylacetylenecarboxylate; Ethyl 3-phenylpropiolate; Ethyl     phenylpropynoate; Ethyl 3-phenylpropymoate; Ethyl     3-phenyl-2-propynoate; 2-Propynoic acid, 3-phenyl-, ethyl ester (9CI)
**** SECTION 2 - COMPOSITION, INFORMATION ON INGREDIENTS ****

+----------------+--------------------------------------+----------+-----------+
| CAS# | Chemical Name | % | EINECS# |
|----------------|--------------------------------------|----------|-----------|
| 2216-94-6 |Ethyl phenylpropiolate | 98 | 218-703-8 |
+----------------+--------------------------------------+----------+-----------+
Hazard Symbols: None Listed.
Risk Phrases: None Listed.

**** SECTION 3 - HAZARDS IDENTIFICATION ****

EMERGENCY OVERVIEW
The toxicological properties of this material have not been fully
investigated.

Potential Health Effects
Eye:
May cause eye irritation.
Skin:
May cause skin irritation.
Ingestion:
May cause irritation of the digestive tract.
Inhalation:
May cause respiratory tract irritation.
Chronic:
No information found.

**** SECTION 4 - FIRST AID MEASURES ****

Eyes:
Immediately flush eyes with plenty of water for at least 15 minutes,
occasionally lifting the upper and lower eyelids. Get medical aid
immediately.
Skin:
Get medical aid. Immediately flush skin with plenty of water for at
least 15 minutes while removing contaminated clothing and shoes.
Ingestion:
Do not induce vomiting. If victim is conscious and alert, give 2-4
cupfuls of milk or water. Never give anything by mouth to an
unconscious person. Get medical aid immediately.
Inhalation:
Remove from exposure and move to fresh air immediately. If not
breathing, give artificial respiration. If breathing is difficult,
give oxygen. Get medical aid.
Notes to Physician:

**** SECTION 5 - FIRE FIGHTING MEASURES ****

General Information:
As in any fire, wear a self-contained breathing apparatus in
pressure-demand, MSHA/NIOSH (approved or equivalent), and full
protective gear. During a fire, irritating and highly toxic gases
may be generated by thermal decomposition or combustion.
Extinguishing Media:
Use water spray, dry chemical, carbon dioxide, or appropriate foam.

**** SECTION 6 - ACCIDENTAL RELEASE MEASURES ****

General Information: Use proper personal protective equipment as indicated
in Section 8.
Spills/Leaks:
Absorb spill with inert material (e.g. vermiculite, sand or earth),
then place in suitable container. Wash area with soap and water.
Clean up spills immediately, observing precautions in the Protective
Equipment section. Provide ventilation.

**** SECTION 7 - HANDLING and STORAGE ****

Handling:
Wash thoroughly after handling. Use with adequate ventilation. Avoid
contact with eyes, skin, and clothing. Avoid ingestion and
inhalation.
Storage:
Store in a cool, dry place. Keep container closed when not in use.
Keep refrigerated. (Store below 4C/39F.)

**** SECTION 8 - EXPOSURE CONTROLS, PERSONAL PROTECTION ****

Engineering Controls:
Use adequate general or local exhaust ventilation to keep airborne
concentrations below the permissible exposure limits.
Exposure Limits
CAS# 2216-94-6:


Personal Protective Equipment

Eyes:
Wear appropriate protective eyeglasses or chemical
safety goggles as described by OSHA's eye and face
protection regulations in 29 CFR 1910.133 or European
Standard EN166.
Skin:
Wear appropriate protective gloves to prevent skin
exposure.
Clothing:
Wear appropriate protective clothing to prevent skin
exposure.
Respirators:
Follow the OSHA respirator regulations found in 29
CFR 1910.134 or European Standard EN 149. Use a
NIOSH/MSHA or European Standard EN 149 approved
respirator if exposure limits are exceeded or if
irritation or other symptoms are experienced.

**** SECTION 9 - PHYSICAL AND CHEMICAL PROPERTIES ****

Physical State: Liquid
Color: light yellow
Odor: None reported.
pH: Not available.
Vapor Pressure: Not available.
Viscosity: Not available.
Boiling Point: 260.0 - 270.0 deg C @ 760.00m
Freezing/Melting Point: Not available.
Autoignition Temperature: Not available.
Flash Point: > 109 deg C (> 228.20 deg F)
Explosion Limits, lower: Not available.
Explosion Limits, upper: Not available.
Decomposition Temperature:
Solubility in water:
Specific Gravity/Density: 1.0550g/cm3
Molecular Formula: C11H10O2
Molecular Weight: 174.20

**** SECTION 10 - STABILITY AND REACTIVITY ****

Chemical Stability:
Stable under normal temperatures and pressures.
Conditions to Avoid:
Incompatible materials.
Incompatibilities with Other Materials:
Strong oxidizing agents.
Hazardous Decomposition Products:
Carbon monoxide, carbon dioxide.
Hazardous Polymerization: Has not been reported.

**** SECTION 11 - TOXICOLOGICAL INFORMATION ****

RTECS#:
CAS# 2216-94-6: UE0110000
LD50/LC50:
Not available.
Carcinogenicity:
Ethyl phenylpropiolate -
Not listed by ACGIH, IARC, or NTP.
Other:
See actual entry in RTECS for complete information.

**** SECTION 12 - ECOLOGICAL INFORMATION ****



**** SECTION 13 - DISPOSAL CONSIDERATIONS ****

Dispose of in a manner consistent with federal, state, and local regulations.

**** SECTION 14 - TRANSPORT INFORMATION ****

IATA
Not regulated as a hazardous material.
IMO
Not regulated as a hazardous material.
RID/ADR
Not regulated as a hazardous material.

**** SECTION 15 - REGULATORY INFORMATION ****

European/International Regulations
European Labeling in Accordance with EC Directives
Hazard Symbols: Not available.
Risk Phrases:
Safety Phrases:
S 24/25 Avoid contact with skin and eyes.
S 36/37/39 Wear suitable protective clothing, gloves
and eye/face protection.
WGK (Water Danger/Protection)
CAS# 2216-94-6: No information available.
Canada
None of the chemicals in this product are listed on the DSL/NDSL list.
CAS# 2216-94-6 is not listed on Canada's Ingredient Disclosure List.
US FEDERAL
TSCA
CAS# 2216-94-6 is not listed on the TSCA inventory.
It is for research and development use only.

**** SECTION 16 - ADDITIONAL INFORMATION ****

MSDS Creation Date: 2/18/1998 Revision #2 Date: 9/06/2002

The information above is believed to be accurate and represents the best
information currently available to us. However, we make no warranty of
merchantability or any other warranty, express or implied, with respect to
such information, and we assume no liability resulting from its use. Users
should make their own investigations to determine the suitability of the
information for their particular purposes. In no way shall the company be
liable for any claims, losses, or damages of any third party or for lost
profits or any special, indirect, incidental, consequential or exemplary
damages, howsoever arising, even if the company has been advised of
the possibility of such damages.
--------------------------------------------------------------------------------
--------------------------------------------------------------------------------
Search More   
ALL MSDS PAGES IN THIS GROUP
NAMECAS
3-Ethylaniline, 98% 587-02-0
Hydroxypropyl-Betha-Cyclodextrin, 97+% (TLC), (on the dry substance) 94035-02-6
4-Chloro-3-nitrophenyl cyclopropyl ketone, 99+% 31545-26-3
Acetonitrile-D3, 100.0 Atom % D 2206-26-0
Bromopentafluorobenzene, 99% 344-04-7
Normal-Propyl Sulfoxide, Tech. 0-01-1
p-Toluenesulfinic Acid, Sodium Salt, 98+% Hydrate 824-79-3
2-Acetylbutyrolactone, 99+% 517-23-7
Formamidine Disulfide Dihydrochloride, 94% 14807-75-1
4,4'-Dichloro-alpha-methylbenzhydrol, 99% 80-06-8
3-O-Methylglucose, 99% 13224-94-7
Mithramycin, 90% (HPLC) 18378-89-7
Phosphorus pentasulfide, 98+% 1314-80-3
5-Hydroxymethyl-5-methyl-1,3-dioxane, 97% 1121-97-7
2,3,5-Triiodobenzoic Acid, 98% 88-82-4
n-Methylbutylamine, 98% (GC) 110-68-9
Quinacrine dihydrochloride dihydrate, 97+% 0-00-0
4-(Diethylamino)salicylaldehyde, 98% 17754-90-4
3,3'-Diazido-Diphenylsulfone, 97% 75742-13-1
n-Methylethylamine hydrochloride, 99% 624-60-2
Triethylenemelamine, 98% 51-18-3
Exo-2-Bromo-5,5-Ethylenedioxy-Bicyclo ??2.2.1??Heptane-Syn-7-Carboxylic 65877-98-7
3-(Trimethylsilyl)-1-propanol, 97% 2917-47-7
4-Phenylimidazole, 99% 670-95-1
Ethyl phenylpropiolate, 98% 2216-94-6
4-Amino-2-butanol, 98% 39884-48-5
Diethyl p-aminobenzylphosphonate 20074-79-7
1,2-Cyclohexanedicarboxylic anhydride, cis and trans mixture, 98% 85-42-7
1,3,6,8-Pyrenetetrasulfonic Acid Tetra- Sodium Salt, 99% (UV-VIS) 59572-10-0
Tetraphenylene, 98% 212-74-8
5-Nitroanthranilonitrile, 99% 17420-30-3
2,2-Dichlorooctadecanoic acid, 90% 56279-50-6
[1,3-Bis(Diphenylphosphino)Propane]Nickel (II) Chloride 15629-92-2
1-Chloro-2,5-Dibromobenzene, 99+% 3460-24-0
1,8-Diamino-3,6-dioxaoctane, 98% 929-59-9
2-(1-Naphthylmethyl)-2-imidazoline hydrochloride, 99% 550-99-2
Monomethylviologen, 99% (titr.)
3-Phenoxypropionic acid, 99% 7170-38-9
1-Heptanol, 98% 111-70-6
2,6-Dihydroxyanthraquinone ,94% 84-60-6
Ethyl Eosin (Potassium Salt) 6359-04-2
2-Hydroxypropyl methacrylate, stabilized with 0.11% MEHQ 923-26-2
Triphenylphosphine 603-35-0
o-Fluorophenylacetonitrile, 97% 326-62-5
1-(Trimethylsilyl)-1-propyne, 98% 6224-91-5
Tetraethylammonium Chloride Hydrate, 99% 56-34-8
Chromium (III) Sulfide, 99% 12018-22-3
Alpha-2-Chloroisodurene, 98% 1585-16-6
2-Amino-5-Nitrothiazole, 97% 121-66-4
3-Methyl-1-(4-sulfophenyl)-2-pyrazolin-5- one (pract), 98% (titr.) 89-36-1

Free MSDS Search ( Providing 250,000+ Material Properties )
Chemcas.com| Ads link:todaystock.net