Search   
MSDS 
:
 2-Acetylbutyrolactone, 99+%
CAS 
:
 517-23-7
SYNONYMS 
:
 ABL
**** SECTION 2 - COMPOSITION, INFORMATION ON INGREDIENTS ****

+----------------+--------------------------------------+----------+-----------+
| CAS# | Chemical Name | % | EINECS# |
|----------------|--------------------------------------|----------|-----------|
| 517-23-7 |2-Acetylbutyrolactone | | 208-235-2 |
+----------------+--------------------------------------+----------+-----------+
Hazard Symbols: XI
Risk Phrases: 36/37/38

**** SECTION 3 - HAZARDS IDENTIFICATION ****

EMERGENCY OVERVIEW
Irritating to eyes, respiratory system and skin.

Potential Health Effects
Eye:
Causes eye irritation.
Skin:
Causes skin irritation.
Ingestion:
Causes gastrointestinal irritation with nausea, vomiting and
diarrhea.
Inhalation:
Causes respiratory tract irritation.
Chronic:
No information found.

**** SECTION 4 - FIRST AID MEASURES ****

Eyes:
Immediately flush eyes with plenty of water for at least 15 minutes,
occasionally lifting the upper and lower eyelids. Get medical aid
immediately.
Skin:
Get medical aid. Flush skin with plenty of water for at least 15
minutes while removing contaminated clothing and shoes.
Ingestion:
Do NOT induce vomiting. If conscious and alert, rinse mouth and
drink 2-4 cupfuls of milk or water.
Inhalation:
Remove from exposure and move to fresh air immediately. If not
breathing, give artificial respiration. If breathing is difficult,
give oxygen. Get medical aid.
Notes to Physician:

**** SECTION 5 - FIRE FIGHTING MEASURES ****

General Information:
As in any fire, wear a self-contained breathing apparatus in
pressure-demand, MSHA/NIOSH (approved or equivalent), and full
protective gear. During a fire, irritating and highly toxic gases
may be generated by thermal decomposition or combustion.
Extinguishing Media:
In case of fire, use water, dry chemical, chemical foam, or
alcohol-resistant foam.

**** SECTION 6 - ACCIDENTAL RELEASE MEASURES ****

General Information: Use proper personal protective equipment as indicated
in Section 8.
Spills/Leaks:
Absorb spill with inert material (e.g. vermiculite, sand or earth),
then place in suitable container. Clean up spills immediately,
observing precautions in the Protective Equipment section.

**** SECTION 7 - HANDLING and STORAGE ****

Handling:
Wash thoroughly after handling. Remove contaminated clothing and
wash before reuse. Avoid contact with eyes, skin, and clothing. Avoid
ingestion and inhalation.
Storage:
Store in a cool, dry place. Keep container closed when not in use.

**** SECTION 8 - EXPOSURE CONTROLS, PERSONAL PROTECTION ****

Engineering Controls:
Use adequate general or local exhaust ventilation to keep airborne
concentrations below the permissible exposure limits.
Exposure Limits
CAS# 517-23-7:


Personal Protective Equipment

Eyes:
Wear appropriate protective eyeglasses or chemical
safety goggles as described by OSHA's eye and face
protection regulations in 29 CFR 1910.133 or European
Standard EN166.
Skin:
Wear appropriate protective gloves and clothing to
prevent skin exposure.
Clothing:
Wear appropriate protective clothing to minimize
contact with skin.
Respirators:
Follow the OSHA respirator regulations found in 29
CFR 1910.134 or European Standard EN 149. Use a
NIOSH/MSHA or European Standard EN 149 approved
respirator if exposure limits are exceeded or if
irritation or other symptoms are experienced.

**** SECTION 9 - PHYSICAL AND CHEMICAL PROPERTIES ****

Physical State: Liquid
Color: clear colorless to faint yellow
Odor: Ester-like odor.
pH: Not available.
Vapor Pressure: Not available.
Viscosity: Not available.
Boiling Point: 107.0 - 108.0 deg C @ 5.00mm Hg
Freezing/Melting Point: Not available.
Autoignition Temperature: Not available.
Flash Point: 211 deg C ( 411.80 deg F)
Explosion Limits, lower: Not available.
Explosion Limits, upper: Not available.
Decomposition Temperature: 211 deg C
Solubility in water: 200 g/l (20 c)
Specific Gravity/Density: 1.1850g/cm3
Molecular Formula:
Molecular Weight: 128.13

**** SECTION 10 - STABILITY AND REACTIVITY ****

Chemical Stability:
Stable under normal temperatures and pressures.
Conditions to Avoid:
Incompatible materials.
Incompatibilities with Other Materials:
Strong oxidants.
Hazardous Decomposition Products:
Carbon monoxide, irritating and toxic fumes and gases, carbon
dioxide.
Hazardous Polymerization: Has not been reported.

**** SECTION 11 - TOXICOLOGICAL INFORMATION ****

RTECS#:
CAS# 517-23-7 unlisted.
LD50/LC50:
Not available.
Carcinogenicity:
2-Acetylbutyrolactone -
Not listed by ACGIH, IARC, or NTP.

**** SECTION 12 - ECOLOGICAL INFORMATION ****



**** SECTION 13 - DISPOSAL CONSIDERATIONS ****

Dispose of in a manner consistent with federal, state, and local regulations.

**** SECTION 14 - TRANSPORT INFORMATION ****

IATA
Not regulated as a hazardous material.
IMO
Not regulated as a hazardous material.
RID/ADR
Not regulated as a hazardous material.

**** SECTION 15 - REGULATORY INFORMATION ****

European/International Regulations
European Labeling in Accordance with EC Directives
Hazard Symbols: XI
Risk Phrases:
R 36/37/38 Irritating to eyes, respiratory system
and skin.
Safety Phrases:
S 24/25 Avoid contact with skin and eyes.
WGK (Water Danger/Protection)
CAS# 517-23-7: No information available.
Canada
CAS# 517-23-7 is listed on Canada's NDSL List.
CAS# 517-23-7 is not listed on Canada's Ingredient Disclosure List.
US FEDERAL
TSCA
CAS# 517-23-7 is listed on the TSCA inventory.

**** SECTION 16 - ADDITIONAL INFORMATION ****

MSDS Creation Date: 9/02/1997 Revision #2 Date: 3/18/2003

The information above is believed to be accurate and represents the best
information currently available to us. However, we make no warranty of
merchantability or any other warranty, express or implied, with respect to
such information, and we assume no liability resulting from its use. Users
should make their own investigations to determine the suitability of the
information for their particular purposes. In no way shall the company be
liable for any claims, losses, or damages of any third party or for lost
profits or any special, indirect, incidental, consequential or exemplary
damages, howsoever arising, even if the company has been advised of
the possibility of such damages.
--------------------------------------------------------------------------------
--------------------------------------------------------------------------------
Search More   
ALL MSDS PAGES IN THIS GROUP
NAMECAS
3-Ethylaniline, 98% 587-02-0
Hydroxypropyl-Betha-Cyclodextrin, 97+% (TLC), (on the dry substance) 94035-02-6
4-Chloro-3-nitrophenyl cyclopropyl ketone, 99+% 31545-26-3
Acetonitrile-D3, 100.0 Atom % D 2206-26-0
Bromopentafluorobenzene, 99% 344-04-7
Normal-Propyl Sulfoxide, Tech. 0-01-1
p-Toluenesulfinic Acid, Sodium Salt, 98+% Hydrate 824-79-3
2-Acetylbutyrolactone, 99+% 517-23-7
Formamidine Disulfide Dihydrochloride, 94% 14807-75-1
4,4'-Dichloro-alpha-methylbenzhydrol, 99% 80-06-8
3-O-Methylglucose, 99% 13224-94-7
Mithramycin, 90% (HPLC) 18378-89-7
Phosphorus pentasulfide, 98+% 1314-80-3
5-Hydroxymethyl-5-methyl-1,3-dioxane, 97% 1121-97-7
2,3,5-Triiodobenzoic Acid, 98% 88-82-4
n-Methylbutylamine, 98% (GC) 110-68-9
Quinacrine dihydrochloride dihydrate, 97+% 0-00-0
4-(Diethylamino)salicylaldehyde, 98% 17754-90-4
3,3'-Diazido-Diphenylsulfone, 97% 75742-13-1
n-Methylethylamine hydrochloride, 99% 624-60-2
Triethylenemelamine, 98% 51-18-3
Exo-2-Bromo-5,5-Ethylenedioxy-Bicyclo ??2.2.1??Heptane-Syn-7-Carboxylic 65877-98-7
3-(Trimethylsilyl)-1-propanol, 97% 2917-47-7
4-Phenylimidazole, 99% 670-95-1
Ethyl phenylpropiolate, 98% 2216-94-6
4-Amino-2-butanol, 98% 39884-48-5
Diethyl p-aminobenzylphosphonate 20074-79-7
1,2-Cyclohexanedicarboxylic anhydride, cis and trans mixture, 98% 85-42-7
1,3,6,8-Pyrenetetrasulfonic Acid Tetra- Sodium Salt, 99% (UV-VIS) 59572-10-0
Tetraphenylene, 98% 212-74-8
5-Nitroanthranilonitrile, 99% 17420-30-3
2,2-Dichlorooctadecanoic acid, 90% 56279-50-6
[1,3-Bis(Diphenylphosphino)Propane]Nickel (II) Chloride 15629-92-2
1-Chloro-2,5-Dibromobenzene, 99+% 3460-24-0
1,8-Diamino-3,6-dioxaoctane, 98% 929-59-9
2-(1-Naphthylmethyl)-2-imidazoline hydrochloride, 99% 550-99-2
Monomethylviologen, 99% (titr.)
3-Phenoxypropionic acid, 99% 7170-38-9
1-Heptanol, 98% 111-70-6
2,6-Dihydroxyanthraquinone ,94% 84-60-6
Ethyl Eosin (Potassium Salt) 6359-04-2
2-Hydroxypropyl methacrylate, stabilized with 0.11% MEHQ 923-26-2
Triphenylphosphine 603-35-0
o-Fluorophenylacetonitrile, 97% 326-62-5
1-(Trimethylsilyl)-1-propyne, 98% 6224-91-5
Tetraethylammonium Chloride Hydrate, 99% 56-34-8
Chromium (III) Sulfide, 99% 12018-22-3
Alpha-2-Chloroisodurene, 98% 1585-16-6
2-Amino-5-Nitrothiazole, 97% 121-66-4
3-Methyl-1-(4-sulfophenyl)-2-pyrazolin-5- one (pract), 98% (titr.) 89-36-1

Free MSDS Search ( Providing 250,000+ Material Properties )
Chemcas.com| Ads link:todaystock.net