Search   
MSDS 
:
 2,2-Dichlorooctadecanoic acid, 90%
CAS 
:
 56279-50-6
SYNONYMS 
:
 None.
**** SECTION 2 - COMPOSITION, INFORMATION ON INGREDIENTS ****

+----------------+--------------------------------------+----------+-----------+
| CAS# | Chemical Name | % | EINECS# |
|----------------|--------------------------------------|----------|-----------|
| 56279-50-6 |2,2-Dichlorooctadecanoic acid, 90% | 90% | unlisted |
+----------------+--------------------------------------+----------+-----------+
Hazard Symbols: C
Risk Phrases: 34

**** SECTION 3 - HAZARDS IDENTIFICATION ****

EMERGENCY OVERVIEW
Causes burns.Corrosive.

Potential Health Effects
Eye:
Causes eye burns.
Skin:
Causes skin burns.
Ingestion:
Causes gastrointestinal tract burns.
Inhalation:
Causes chemical burns to the respiratory tract.
Chronic:
No information found.

**** SECTION 4 - FIRST AID MEASURES ****

Eyes:
Immediately flush eyes with plenty of water for at least 15 minutes,
occasionally lifting the upper and lower eyelids. Get medical aid
immediately.
Skin:
Get medical aid. Immediately flush skin with plenty of water for at
least 15 minutes while removing contaminated clothing and shoes.
Ingestion:
Do not induce vomiting. If victim is conscious and alert, give 2-4
cupfuls of milk or water. Never give anything by mouth to an
unconscious person. Get medical aid immediately.
Inhalation:
Get medical aid immediately. Remove from exposure and move to fresh
air immediately. If not breathing, give artificial respiration. If
breathing is difficult, give oxygen.
Notes to Physician:

**** SECTION 5 - FIRE FIGHTING MEASURES ****

General Information:
As in any fire, wear a self-contained breathing apparatus in
pressure-demand, MSHA/NIOSH (approved or equivalent), and full
protective gear.
Extinguishing Media:
Use foam, dry chemical, or carbon dioxide.

**** SECTION 6 - ACCIDENTAL RELEASE MEASURES ****

General Information: Use proper personal protective equipment as indicated
in Section 8.
Spills/Leaks:
Vacuum or sweep up material and place into a suitable disposal
container. Reduce airborne dust and prevent scattering by moistening
with water. Clean up spills immediately, observing precautions in
the Protective Equipment section.

**** SECTION 7 - HANDLING and STORAGE ****

Handling:
Wash thoroughly after handling. Wash hands before eating. Remove
contaminated clothing and wash before reuse. Use with adequate
ventilation. Do not breathe dust, vapor, mist, or gas. Do not get in
eyes, on skin, or on clothing. Do not ingest or inhale.
Storage:
Store in a cool, dry place. Store in a tightly closed container.
Corrosives area.

**** SECTION 8 - EXPOSURE CONTROLS, PERSONAL PROTECTION ****

Engineering Controls:
Use adequate general or local exhaust ventilation to keep airborne
concentrations below the permissible exposure limits.
Exposure Limits
CAS# 56279-50-6:


Personal Protective Equipment

Eyes:
Wear appropriate protective eyeglasses or chemical
safety goggles as described by OSHA's eye and face
protection regulations in 29 CFR 1910.133 or European
Standard EN166.
Skin:
Wear appropriate protective gloves to prevent skin
exposure.
Clothing:
Wear appropriate protective clothing to prevent skin
exposure.
Respirators:
Follow the OSHA respirator regulations found in 29
CFR 1910.134 or European Standard EN 149. Use a
NIOSH/MSHA or European Standard EN 149 approved
respirator if exposure limits are exceeded or if
irritation or other symptoms are experienced.

**** SECTION 9 - PHYSICAL AND CHEMICAL PROPERTIES ****

Physical State: Solid
Color: slightly yellow
Odor: Not available.
pH: Not available.
Vapor Pressure: Not available.
Viscosity: Not available.
Boiling Point: Not available.
Freezing/Melting Point: 40 - 43 deg C
Autoignition Temperature: Not available.
Flash Point: 180 deg C ( 356.00 deg F)
Explosion Limits, lower: Not available.
Explosion Limits, upper: Not available.
Decomposition Temperature: 180 deg C
Solubility in water:
Specific Gravity/Density:
Molecular Formula: C18H34Cl2O2
Molecular Weight: 353.36

**** SECTION 10 - STABILITY AND REACTIVITY ****

Chemical Stability:
Stable under normal temperatures and pressures.
Conditions to Avoid:
Incompatible materials.
Incompatibilities with Other Materials:
Strong oxidizing agents.
Hazardous Decomposition Products:
Hydrogen chloride, carbon monoxide, carbon dioxide.
Hazardous Polymerization: Has not been reported.

**** SECTION 11 - TOXICOLOGICAL INFORMATION ****

RTECS#:
CAS# 56279-50-6 unlisted.
LD50/LC50:
Not available.
Carcinogenicity:
2,2-Dichlorooctadecanoic acid, 90% -
Not listed by ACGIH, IARC, or NTP.

**** SECTION 12 - ECOLOGICAL INFORMATION ****



**** SECTION 13 - DISPOSAL CONSIDERATIONS ****

Dispose of in a manner consistent with federal, state, and local regulations.

**** SECTION 14 - TRANSPORT INFORMATION ****

IATA
Shipping Name: CORROSIVE SOLID, ACIDIC, ORGANIC, N.O.S.*
Hazard Class: 8
UN Number: 3261
Packing Group: III
IMO
Shipping Name: CORROSIVE SOLID, N.O.S.
Hazard Class: 8
UN Number: 3261
Packing Group: III
RID/ADR
Shipping Name: CORROSIVE SOLID, ACIDIC, ORGANIC, N.O.S.
Hazard Class: 8
UN Number: 3261
Packing group: III

**** SECTION 15 - REGULATORY INFORMATION ****

European/International Regulations
European Labeling in Accordance with EC Directives
Hazard Symbols: C
Risk Phrases:
R 34 Causes burns.
Safety Phrases:
S 26 In case of contact with eyes, rinse immediately
with plenty of water and seek medical advice.
S 36/37/39 Wear suitable protective clothing, gloves
and eye/face protection.
S 45 In case of accident or if you feel unwell, seek
medical advice immediately (show the label where
possible).
WGK (Water Danger/Protection)
CAS# 56279-50-6: No information available.
Canada
None of the chemicals in this product are listed on the DSL/NDSL list.
CAS# 56279-50-6 is not listed on Canada's Ingredient Disclosure List.
US FEDERAL
TSCA
CAS# 56279-50-6 is not listed on the TSCA inventory.
It is for research and development use only.

**** SECTION 16 - ADDITIONAL INFORMATION ****

MSDS Creation Date: 9/02/1997 Revision #2 Date: 3/18/2003

The information above is believed to be accurate and represents the best
information currently available to us. However, we make no warranty of
merchantability or any other warranty, express or implied, with respect to
such information, and we assume no liability resulting from its use. Users
should make their own investigations to determine the suitability of the
information for their particular purposes. In no way shall the company be
liable for any claims, losses, or damages of any third party or for lost
profits or any special, indirect, incidental, consequential or exemplary
damages, howsoever arising, even if the company has been advised of
the possibility of such damages.
--------------------------------------------------------------------------------
--------------------------------------------------------------------------------
Search More   
ALL MSDS PAGES IN THIS GROUP
NAMECAS
3-Ethylaniline, 98% 587-02-0
Hydroxypropyl-Betha-Cyclodextrin, 97+% (TLC), (on the dry substance) 94035-02-6
4-Chloro-3-nitrophenyl cyclopropyl ketone, 99+% 31545-26-3
Acetonitrile-D3, 100.0 Atom % D 2206-26-0
Bromopentafluorobenzene, 99% 344-04-7
Normal-Propyl Sulfoxide, Tech. 0-01-1
p-Toluenesulfinic Acid, Sodium Salt, 98+% Hydrate 824-79-3
2-Acetylbutyrolactone, 99+% 517-23-7
Formamidine Disulfide Dihydrochloride, 94% 14807-75-1
4,4'-Dichloro-alpha-methylbenzhydrol, 99% 80-06-8
3-O-Methylglucose, 99% 13224-94-7
Mithramycin, 90% (HPLC) 18378-89-7
Phosphorus pentasulfide, 98+% 1314-80-3
5-Hydroxymethyl-5-methyl-1,3-dioxane, 97% 1121-97-7
2,3,5-Triiodobenzoic Acid, 98% 88-82-4
n-Methylbutylamine, 98% (GC) 110-68-9
Quinacrine dihydrochloride dihydrate, 97+% 0-00-0
4-(Diethylamino)salicylaldehyde, 98% 17754-90-4
3,3'-Diazido-Diphenylsulfone, 97% 75742-13-1
n-Methylethylamine hydrochloride, 99% 624-60-2
Triethylenemelamine, 98% 51-18-3
Exo-2-Bromo-5,5-Ethylenedioxy-Bicyclo ??2.2.1??Heptane-Syn-7-Carboxylic 65877-98-7
3-(Trimethylsilyl)-1-propanol, 97% 2917-47-7
4-Phenylimidazole, 99% 670-95-1
Ethyl phenylpropiolate, 98% 2216-94-6
4-Amino-2-butanol, 98% 39884-48-5
Diethyl p-aminobenzylphosphonate 20074-79-7
1,2-Cyclohexanedicarboxylic anhydride, cis and trans mixture, 98% 85-42-7
1,3,6,8-Pyrenetetrasulfonic Acid Tetra- Sodium Salt, 99% (UV-VIS) 59572-10-0
Tetraphenylene, 98% 212-74-8
5-Nitroanthranilonitrile, 99% 17420-30-3
2,2-Dichlorooctadecanoic acid, 90% 56279-50-6
[1,3-Bis(Diphenylphosphino)Propane]Nickel (II) Chloride 15629-92-2
1-Chloro-2,5-Dibromobenzene, 99+% 3460-24-0
1,8-Diamino-3,6-dioxaoctane, 98% 929-59-9
2-(1-Naphthylmethyl)-2-imidazoline hydrochloride, 99% 550-99-2
Monomethylviologen, 99% (titr.)
3-Phenoxypropionic acid, 99% 7170-38-9
1-Heptanol, 98% 111-70-6
2,6-Dihydroxyanthraquinone ,94% 84-60-6
Ethyl Eosin (Potassium Salt) 6359-04-2
2-Hydroxypropyl methacrylate, stabilized with 0.11% MEHQ 923-26-2
Triphenylphosphine 603-35-0
o-Fluorophenylacetonitrile, 97% 326-62-5
1-(Trimethylsilyl)-1-propyne, 98% 6224-91-5
Tetraethylammonium Chloride Hydrate, 99% 56-34-8
Chromium (III) Sulfide, 99% 12018-22-3
Alpha-2-Chloroisodurene, 98% 1585-16-6
2-Amino-5-Nitrothiazole, 97% 121-66-4
3-Methyl-1-(4-sulfophenyl)-2-pyrazolin-5- one (pract), 98% (titr.) 89-36-1

Free MSDS Search ( Providing 250,000+ Material Properties )
Chemcas.com| Ads link:todaystock.net