**** SECTION 2 - COMPOSITION, INFORMATION ON INGREDIENTS ****
+----------------+--------------------------------------+----------+-----------+
| CAS# | Chemical Name | % | EINECS# |
|----------------|--------------------------------------|----------|-----------|
| 39884-48-5 |2-Butanol, 4-amino- | 98 | 254-673-2 |
+----------------+--------------------------------------+----------+-----------+
Hazard Symbols: C
Risk Phrases: 34
**** SECTION 3 - HAZARDS IDENTIFICATION ****
EMERGENCY OVERVIEW
Causes burns.
Potential Health Effects
Eye:
Causes eye burns.
Skin:
Harmful if absorbed through the skin. Causes skin burns. Amines have
been known to cause skin irritation and sensitization.
Ingestion:
Harmful if swallowed. Causes gastrointestinal tract burns.
Inhalation:
Harmful if inhaled. Causes chemical burns to the respiratory tract.
Chronic:
No information found.
**** SECTION 4 - FIRST AID MEASURES ****
Eyes:
In case of contact, immediately flush eyes with plenty of water for
at least 15 minutes. Get medical aid immediately.
Skin:
In case of contact, immediately flush skin with plenty of water for
at least 15 minutes while removing contaminated clothing and shoes.
Get medical aid immediately. Wash clothing before reuse.
Ingestion:
If swallowed, do NOT induce vomiting. Get medical aid immediately.
If victim is fully conscious, give a cupful of water. Never give
anything by mouth to an unconscious person.
Inhalation:
If inhaled, remove to fresh air. If not breathing, give artificial
respiration. If breathing is difficult, give oxygen. Get medical aid.
Notes to Physician:
**** SECTION 5 - FIRE FIGHTING MEASURES ****
General Information:
As in any fire, wear a self-contained breathing apparatus in
pressure-demand, MSHA/NIOSH (approved or equivalent), and full
protective gear. During a fire, irritating and highly toxic gases
may be generated by thermal decomposition or combustion. Use water
spray to keep fire-exposed containers cool. Combustible liquid and
vapor.
Extinguishing Media:
Use water spray, dry chemical, carbon dioxide, or appropriate foam.
**** SECTION 6 - ACCIDENTAL RELEASE MEASURES ****
General Information: Use proper personal protective equipment as indicated
in Section 8.
Spills/Leaks:
Absorb spill with inert material (e.g. vermiculite, sand or earth),
then place in suitable container. Avoid runoff into storm sewers and
ditches which lead to waterways. Clean up spills immediately,
observing precautions in the Protective Equipment section. Remove all
sources of ignition. Provide ventilation.
**** SECTION 7 - HANDLING and STORAGE ****
Handling:
Wash thoroughly after handling. Remove contaminated clothing and
wash before reuse. Do not get in eyes, on skin, or on clothing. Keep
container tightly closed. Discard contaminated shoes. Use only with
adequate ventilation. Keep away from heat and flame. Avoid breathing
vapor or mist.
Storage:
Keep away from sources of ignition. Store in a cool, dry place. Keep
container closed when not in use. Corrosives area.
**** SECTION 8 - EXPOSURE CONTROLS, PERSONAL PROTECTION ****
Engineering Controls:
Facilities storing or utilizing this material should be equipped
with an eyewash facility and a safety shower. Use adequate
ventilation to keep airborne concentrations low.
Exposure Limits
CAS# 39884-48-5:
Personal Protective Equipment
Eyes:
Wear chemical splash goggles and face shield.
Skin:
Wear appropriate protective gloves to prevent skin
exposure.
Clothing:
Wear appropriate protective clothing to prevent skin
exposure.
Respirators:
A respiratory protection program that meets OSHA's 29
CFR 1910.134 and ANSI Z88.2 requirements or European
Standard EN 149 must be followed whenever workplace
conditions warrant respirator use.
**** SECTION 9 - PHYSICAL AND CHEMICAL PROPERTIES ****
Physical State: Liquid
Color: clear colorless to pale yellow
Odor: amine-like
pH: Not available.
Vapor Pressure: Not available.
Viscosity: Not available.
Boiling Point: 103-104 deg C @ 34 mm Hg
Freezing/Melting Point: Not available.
Autoignition Temperature: Not applicable.
Flash Point: Not available.
Explosion Limits, lower: Not available.
Explosion Limits, upper: Not available.
Decomposition Temperature:
Solubility in water:
Specific Gravity/Density: .93
Molecular Formula: C4H11NO
Molecular Weight: 89.14
**** SECTION 10 - STABILITY AND REACTIVITY ****
Chemical Stability:
Stable under normal temperatures and pressures.
Conditions to Avoid:
Ignition sources, excess heat.
Incompatibilities with Other Materials:
Strong oxidizing agents, strong acids, aluminum.
Hazardous Decomposition Products:
Nitrogen oxides, carbon monoxide, irritating and toxic fumes and
gases, carbon dioxide.
Hazardous Polymerization: Has not been reported.
**** SECTION 11 - TOXICOLOGICAL INFORMATION ****
RTECS#:
CAS# 39884-48-5 unlisted.
LD50/LC50:
Not available.
Carcinogenicity:
2-Butanol, 4-amino- -
Not listed by ACGIH, IARC, or NTP.
**** SECTION 12 - ECOLOGICAL INFORMATION ****
**** SECTION 13 - DISPOSAL CONSIDERATIONS ****
Dispose of in a manner consistent with federal, state, and local regulations.
**** SECTION 14 - TRANSPORT INFORMATION ****
IATA
Shipping Name: AMINES, LIQUID, CORROSIVE, N.O.S.*
Hazard Class: 8
UN Number: 2735
Packing Group: III
IMO
Shipping Name: AMINES, LIQUID, CORROSIVE, N.O.S.
Hazard Class: 8
UN Number: 2735
Packing Group: III
RID/ADR
Shipping Name: AMINES, LIQUID, CORROSIVE, N.O.S.
Hazard Class: 8
UN Number: 2735
Packing group: III
**** SECTION 15 - REGULATORY INFORMATION ****
European/International Regulations
European Labeling in Accordance with EC Directives
Hazard Symbols: C
Risk Phrases:
R 34 Causes burns.
Safety Phrases:
S 25 Avoid contact with eyes.
S 36/37/39 Wear suitable protective clothing, gloves
and eye/face protection.
S 45 In case of accident or if you feel unwell, seek
medical advice immediately (show the label where
possible).
WGK (Water Danger/Protection)
CAS# 39884-48-5: No information available.
Canada
CAS# 39884-48-5 is listed on Canada's NDSL List.
CAS# 39884-48-5 is not listed on Canada's Ingredient Disclosure List.
US FEDERAL
TSCA
CAS# 39884-48-5 is listed on the TSCA inventory.
**** SECTION 16 - ADDITIONAL INFORMATION ****
MSDS Creation Date: 9/02/1997 Revision #5 Date: 5/25/2004
The information above is believed to be accurate and represents the best
information currently available to us. However, we make no warranty of
merchantability or any other warranty, express or implied, with respect to
such information, and we assume no liability resulting from its use. Users
should make their own investigations to determine the suitability of the
information for their particular purposes. In no way shall the company be
liable for any claims, losses, or damages of any third party or for lost
profits or any special, indirect, incidental, consequential or exemplary
damages, howsoever arising, even if the company has been advised of
the possibility of such damages.
--------------------------------------------------------------------------------
--------------------------------------------------------------------------------
|
|
|
| ALL MSDS PAGES IN THIS GROUP
| | NAME | CAS |
|
3-Ethylaniline, 98%
| 587-02-0 |
|
Hydroxypropyl-Betha-Cyclodextrin, 97+% (TLC), (on the dry substance)
| 94035-02-6 |
|
4-Chloro-3-nitrophenyl cyclopropyl ketone, 99+%
| 31545-26-3 |
|
Acetonitrile-D3, 100.0 Atom % D
| 2206-26-0 |
|
Bromopentafluorobenzene, 99%
| 344-04-7 |
|
Normal-Propyl Sulfoxide, Tech.
| 0-01-1 |
|
p-Toluenesulfinic Acid, Sodium Salt, 98+% Hydrate
| 824-79-3 |
|
2-Acetylbutyrolactone, 99+%
| 517-23-7 |
|
Formamidine Disulfide Dihydrochloride, 94%
| 14807-75-1 |
|
4,4'-Dichloro-alpha-methylbenzhydrol, 99%
| 80-06-8 |
|
3-O-Methylglucose, 99%
| 13224-94-7 |
|
Mithramycin, 90% (HPLC)
| 18378-89-7 |
|
Phosphorus pentasulfide, 98+%
| 1314-80-3 |
|
5-Hydroxymethyl-5-methyl-1,3-dioxane, 97%
| 1121-97-7 |
|
2,3,5-Triiodobenzoic Acid, 98%
| 88-82-4 |
|
n-Methylbutylamine, 98% (GC)
| 110-68-9 |
|
Quinacrine dihydrochloride dihydrate, 97+%
| 0-00-0 |
|
4-(Diethylamino)salicylaldehyde, 98%
| 17754-90-4 |
|
3,3'-Diazido-Diphenylsulfone, 97%
| 75742-13-1 |
|
n-Methylethylamine hydrochloride, 99%
| 624-60-2 |
|
Triethylenemelamine, 98%
| 51-18-3 |
|
Exo-2-Bromo-5,5-Ethylenedioxy-Bicyclo ??2.2.1??Heptane-Syn-7-Carboxylic
| 65877-98-7 |
|
3-(Trimethylsilyl)-1-propanol, 97%
| 2917-47-7 |
|
4-Phenylimidazole, 99%
| 670-95-1 |
|
Ethyl phenylpropiolate, 98%
| 2216-94-6 |
|
4-Amino-2-butanol, 98%
| 39884-48-5 |
|
Diethyl p-aminobenzylphosphonate
| 20074-79-7 |
|
1,2-Cyclohexanedicarboxylic anhydride, cis and trans mixture, 98%
| 85-42-7 |
|
1,3,6,8-Pyrenetetrasulfonic Acid Tetra- Sodium Salt, 99% (UV-VIS)
| 59572-10-0 |
|
Tetraphenylene, 98%
| 212-74-8 |
|
5-Nitroanthranilonitrile, 99%
| 17420-30-3 |
|
2,2-Dichlorooctadecanoic acid, 90%
| 56279-50-6 |
|
[1,3-Bis(Diphenylphosphino)Propane]Nickel (II) Chloride
| 15629-92-2 |
|
1-Chloro-2,5-Dibromobenzene, 99+%
| 3460-24-0 |
|
1,8-Diamino-3,6-dioxaoctane, 98%
| 929-59-9 |
|
2-(1-Naphthylmethyl)-2-imidazoline hydrochloride, 99%
| 550-99-2 |
|
Monomethylviologen, 99% (titr.)
| |
|
3-Phenoxypropionic acid, 99%
| 7170-38-9 |
|
1-Heptanol, 98%
| 111-70-6 |
|
2,6-Dihydroxyanthraquinone ,94%
| 84-60-6 |
|
Ethyl Eosin (Potassium Salt)
| 6359-04-2 |
|
2-Hydroxypropyl methacrylate, stabilized with 0.11% MEHQ
| 923-26-2 |
|
Triphenylphosphine
| 603-35-0 |
|
o-Fluorophenylacetonitrile, 97%
| 326-62-5 |
|
1-(Trimethylsilyl)-1-propyne, 98%
| 6224-91-5 |
|
Tetraethylammonium Chloride Hydrate, 99%
| 56-34-8 |
|
Chromium (III) Sulfide, 99%
| 12018-22-3 |
|
Alpha-2-Chloroisodurene, 98%
| 1585-16-6 |
|
2-Amino-5-Nitrothiazole, 97%
| 121-66-4 |
|
3-Methyl-1-(4-sulfophenyl)-2-pyrazolin-5- one (pract), 98% (titr.)
| 89-36-1 |
|
|