Search   
MSDS 
:
 2-Propene-1-Sulfonic Acid Sodium Salt (Pract)
CAS 
:
 2495-39-8
SYNONYMS 
:
 Sodium Allyl Sulfonate
**** SECTION 2 - COMPOSITION, INFORMATION ON INGREDIENTS ****

+----------------+--------------------------------------+----------+-----------+
| CAS# | Chemical Name | % | EINECS# |
|----------------|--------------------------------------|----------|-----------|
| 2495-39-8 |Sodium Allyl Sulfonate | 100 | 219-676-5 |
+----------------+--------------------------------------+----------+-----------+
Hazard Symbols: None Listed.
Risk Phrases: None Listed.

**** SECTION 3 - HAZARDS IDENTIFICATION ****

EMERGENCY OVERVIEW
The toxicological properties of this material have not been fully
investigated.

Potential Health Effects
Eye:
May cause eye irritation. The toxicological properties of this
material have not been fully investigated.
Skin:
May cause skin irritation. The toxicological properties of this
material have not been fully investigated.
Ingestion:
May cause gastrointestinal irritation with nausea, vomiting and
diarrhea. The toxicological properties of this substance have not
been fully investigated. May cause central nervous system effects
and/or neurological effects.
Inhalation:
May cause respiratory tract irritation. The toxicological properties
of this substance have not been fully investigated. May cause
neurological effects.
Chronic:
Chronic exposure to vapors may produce polyneuropathy.

**** SECTION 4 - FIRST AID MEASURES ****

Eyes:
Flush eyes with plenty of water for at least 15 minutes,
occasionally lifting the upper and lower eyelids. Get medical aid
immediately.
Skin:
Get medical aid. Flush skin with plenty of water for at least 15
minutes while removing contaminated clothing and shoes. Wash clothing
before reuse.
Ingestion:
If victim is conscious and alert, give 2-4 cupfuls of milk or water.
Never give anything by mouth to an unconscious person. Get medical
aid immediately.
Inhalation:
Get medical aid immediately. Remove from exposure and move to fresh
air immediately. If not breathing, give artificial respiration. If
breathing is difficult, give oxygen.
Notes to Physician:
Treat symptomatically and supportively.

**** SECTION 5 - FIRE FIGHTING MEASURES ****

General Information:
As in any fire, wear a self-contained breathing apparatus in
pressure-demand, MSHA/NIOSH (approved or equivalent), and full
protective gear. During a fire, irritating and highly toxic gases
may be generated by thermal decomposition or combustion.
Extinguishing Media:
Use agent most appropriate to extinguish fire. Use water spray, dry
chemical, carbon dioxide, or appropriate foam.

**** SECTION 6 - ACCIDENTAL RELEASE MEASURES ****

General Information: Use proper personal protective equipment as indicated
in Section 8.
Spills/Leaks:
Clean up spills immediately, observing precautions in the Protective
Equipment section. Sweep up or absorb material, then place into a
suitable clean, dry, closed container for disposal. Avoid generating
dusty conditions. Provide ventilation.

**** SECTION 7 - HANDLING and STORAGE ****

Handling:
Wash thoroughly after handling. Remove contaminated clothing and
wash before reuse. Avoid contact with eyes, skin, and clothing. Avoid
ingestion and inhalation. Wash clothing before reuse.
Storage:
Store in a cool, dry place. Keep container closed when not in use.

**** SECTION 8 - EXPOSURE CONTROLS, PERSONAL PROTECTION ****

Engineering Controls:
Use process enclosure, local exhaust ventilation, or other
engineering controls to control airborne levels.
Exposure Limits
CAS# 2495-39-8:


Personal Protective Equipment

Eyes:
Wear chemical splash goggles. Wear appropriate
protective eyeglasses or chemical safety goggles as
described by OSHA's eye and face protection
regulations in 29 CFR 1910.133 or European Standard
EN166.
Skin:
Wear appropriate protective gloves to prevent skin
exposure.
Clothing:
Wear appropriate protective clothing to minimize
contact with skin.
Respirators:
A respiratory protection program that meets OSHA's 29
CFR 1910.134 and ANSI Z88.2 requirements or European
Standard EN 149 must be followed whenever workplace
conditions warrant respirator use.

**** SECTION 9 - PHYSICAL AND CHEMICAL PROPERTIES ****

Physical State: Solid
Color: Not available.
Odor: Not available.
pH: Not available.
Vapor Pressure: Not available.
Viscosity: Not available.
Boiling Point: Not available.
Freezing/Melting Point: Not available.
Autoignition Temperature: Not available.
Flash Point: Not applicable.
Explosion Limits, lower: N/A
Explosion Limits, upper: N/A
Decomposition Temperature:
Solubility in water: 1 g/25 ml
Specific Gravity/Density:
Molecular Formula: C3H5NaO3S
Molecular Weight: 144.13

**** SECTION 10 - STABILITY AND REACTIVITY ****

Chemical Stability:
Stable under normal temperatures and pressures.
Conditions to Avoid:
Incompatible materials, strong oxidants.
Incompatibilities with Other Materials:
Strong oxidizing agents.
Hazardous Decomposition Products:
Carbon monoxide, irritating and toxic fumes and gases, carbon
dioxide, sodium oxide.
Hazardous Polymerization: Has not been reported

**** SECTION 11 - TOXICOLOGICAL INFORMATION ****

RTECS#:
CAS# 2495-39-8 unlisted.
LD50/LC50:
Not available.
Carcinogenicity:
Sodium Allyl Sulfonate -
Not listed by ACGIH, IARC, or NTP.

**** SECTION 12 - ECOLOGICAL INFORMATION ****



**** SECTION 13 - DISPOSAL CONSIDERATIONS ****

Dispose of in a manner consistent with federal, state, and local regulations.

**** SECTION 14 - TRANSPORT INFORMATION ****

IATA
Not regulated as a hazardous material.
IMO
Not regulated as a hazardous material.
RID/ADR
Not regulated as a hazardous material.

**** SECTION 15 - REGULATORY INFORMATION ****

European/International Regulations
European Labeling in Accordance with EC Directives
Hazard Symbols: Not available.
Risk Phrases:
Safety Phrases:
S 24/25 Avoid contact with skin and eyes.
WGK (Water Danger/Protection)
CAS# 2495-39-8: 1
Canada
CAS# 2495-39-8 is listed on Canada's DSL List.
CAS# 2495-39-8 is not listed on Canada's Ingredient Disclosure List.
US FEDERAL
TSCA
CAS# 2495-39-8 is listed on the TSCA inventory.

**** SECTION 16 - ADDITIONAL INFORMATION ****

MSDS Creation Date: 4/29/1998 Revision #2 Date: 3/18/2003

The information above is believed to be accurate and represents the best
information currently available to us. However, we make no warranty of
merchantability or any other warranty, express or implied, with respect to
such information, and we assume no liability resulting from its use. Users
should make their own investigations to determine the suitability of the
information for their particular purposes. In no way shall the company be
liable for any claims, losses, or damages of any third party or for lost
profits or any special, indirect, incidental, consequential or exemplary
damages, howsoever arising, even if the company has been advised of
the possibility of such damages.
--------------------------------------------------------------------------------
--------------------------------------------------------------------------------
Search More   
ALL MSDS PAGES IN THIS GROUP
NAMECAS
2-Methylcyclopropanecarboxylic Acid, 98% 29555-02-0
m-Phenylene diisocyanate 123-61-5
2-Dodecanol, 99% 10203-28-8
Oxalic Acid Bis(Benzylidenehydrazide), 97% (UV-Vis) 6629-10-3
5-Bromopyrimidine, 98% 4595-59-9
4,6-Diamino-2-Mercaptopyrimidine, Hemihydrate, 99% 1004-39-3
4-(4'-Aminophenylazo)-Phenylarsonic Acid 6966-64-9
2,4-Dicyano-3-Methylglutaramide, 99% 5447-66-5
Ethyl trimethylacetate, 98% 3938-95-2
2-Mercapto-4-methylpyrimidine hydrochloride, 99% 6959-66-6
1-Pyrrolidinecarboxaldehyde, 97% 3760-54-1
n-Methyleneglycinonitrile (trimer) 6865-92-5
5-Methoxytryptamine hydrochloride, 97% 66-83-1
Nifuroxime 555-15-7
N-Alpha-Acetyl-L-Histidine Monohydrate 99+% 39145-52-3
11-Bromoundecanoic acid, tech., 93% 2834-05-1
Tert.-Butyl Disulfide, 98% 110-06-5
4'-Dodecyloxyacetophenone, 94% (GC) 2175-80-6
Ethylmagnesium chloride, 25 wt% solution in tetrahydrofuran 109-99-9
Methyl Vinyl Ether/Maleic Acid Copolymer, Low Molecular Weight 25153-40-6
Chlorohydroquinone, tech., 90% 615-67-8
Tri-n-octylphosphine oxide, 97% 78-50-2
Silver proteinate (mild) 9008-42-8
Lead (IV) Oxide, P.A. 1309-60-0
1,4-Butane Sultone, 99+% 1633-83-6
4-Chloro-3-Iodobenzotrifluoride, 99% 672-57-1
Theophylline, Anhydrous, U.S.P./N.F. 58-55-9
P-Anisoyl Chloride, 99% 100-07-2
3-Carboxy-1,4-dimethyl-1h-pyrrole-2-acetic acid 33369-45-8
4-Amino-2,6-dichlorophenol, 98% 5930-28-9
Aminoguanidine Hemisulfate 996-19-0
N-Methylmorpholine hydrochloride, 99+% 3651-67-0
2-Chloro-4,6-dimethoxy-1,3,5-triazine, 98% 3140-73-6
1-Heptyne, 99% 628-71-7
(R)-(+)-2,2'-Bis(diphenylphosphino)- 1,1'-binaphthyl, 99+% 76189-55-4
2-Propene-1-Sulfonic Acid Sodium Salt (Pract) 2495-39-8
6-Amino-1-Hexanol, 94% 4048-33-3
2,5-Dibromonitrobenzene, 97% 3460-18-2
Rubidium Fluoride Hydrate, 99+% 16422-67-6
7-Chloro-2H-1,4-Benzothiazin-3(4H)-One,99% 5333-05-1
2-Methyl-2-Nitropropane, 99% 594-70-7
N-Ethyl-n-butylamine, 99% 13360-63-9
2,6-Dimethylaniline, 99% 87-62-7
2-Chloro-3-Methylquinoline, 97% 57876-69-4
3-Cyanobenzaldehyde, 99% 24964-64-5
N,N'-Diallyltartardiamide, 99+% 28843-34-7
3-Aminobenzonitrile, 99% 2237-30-1
2-Chloropyridine-n-oxide hydrochloride, 97% 20295-64-1
Sodium perchlorate 7601-89-0
Butadiene sulfone, 98% 77-79-2

Free MSDS Search ( Providing 250,000+ Material Properties )
Chemcas.com| Ads link:todaystock.net