Search   
MSDS 
:
 Butadiene sulfone, 98%
CAS 
:
 77-79-2
SYNONYMS 
:
 2,5-Dihydrothiophene-1,1-dioxide, 3-Sulfolene; 2,5-Dihydrothiophene     sulfone; beta-Sulfone; Sulfol-3-ene
**** SECTION 2 - COMPOSITION, INFORMATION ON INGREDIENTS ****

+----------------+--------------------------------------+----------+-----------+
| CAS# | Chemical Name | % | EINECS# |
|----------------|--------------------------------------|----------|-----------|
| 77-79-2 |Butadiene sulfone | 98 | 201-059-7 |
+----------------+--------------------------------------+----------+-----------+
Hazard Symbols: XI
Risk Phrases: 36/37/38

**** SECTION 3 - HAZARDS IDENTIFICATION ****

EMERGENCY OVERVIEW
Irritating to eyes, respiratory system and skin.

Potential Health Effects
Eye:
Causes severe eye irritation.
Skin:
Causes skin irritation.
Ingestion:
Causes digestive tract irritation.
Inhalation:
Causes respiratory tract irritation.
Chronic:
Laboratory experiments have resulted in mutagenic effects.

**** SECTION 4 - FIRST AID MEASURES ****

Eyes:
Immediately flush eyes with plenty of water for at least 15 minutes,
occasionally lifting the upper and lower eyelids. Get medical aid.
Skin:
Get medical aid. Flush skin with plenty of water for at least 15
minutes while removing contaminated clothing and shoes. Wash clothing
before reuse.
Ingestion:
If victim is conscious and alert, give 2-4 cupfuls of milk or water.
Never give anything by mouth to an unconscious person. Get medical
aid.
Inhalation:
Remove from exposure and move to fresh air immediately. If not
breathing, give artificial respiration. If breathing is difficult,
give oxygen. Get medical aid.
Notes to Physician:
Treat symptomatically and supportively.

**** SECTION 5 - FIRE FIGHTING MEASURES ****

General Information:
As in any fire, wear a self-contained breathing apparatus in
pressure-demand, MSHA/NIOSH (approved or equivalent), and full
protective gear. During a fire, irritating and highly toxic gases
may be generated by thermal decomposition or combustion.
Extinguishing Media:
Use agent most appropriate to extinguish fire. Use water spray, dry
chemical, carbon dioxide, or appropriate foam.

**** SECTION 6 - ACCIDENTAL RELEASE MEASURES ****

General Information: Use proper personal protective equipment as indicated
in Section 8.
Spills/Leaks:
Clean up spills immediately, observing precautions in the Protective
Equipment section. Sweep up, then place into a suitable container for
disposal. Avoid generating dusty conditions. Provide ventilation.

**** SECTION 7 - HANDLING and STORAGE ****

Handling:
Wash thoroughly after handling. Remove contaminated clothing and
wash before reuse. Use with adequate ventilation. Minimize dust
generation and accumulation. Avoid contact with eyes, skin, and
clothing. Avoid ingestion and inhalation.
Storage:
Store in a tightly closed container. Store in a cool, dry,
well-ventilated area away from incompatible substances.

**** SECTION 8 - EXPOSURE CONTROLS, PERSONAL PROTECTION ****

Engineering Controls:
Facilities storing or utilizing this material should be equipped
with an eyewash facility and a safety shower. Use adequate
ventilation to keep airborne concentrations low.
Exposure Limits
CAS# 77-79-2:


Personal Protective Equipment

Eyes:
Wear appropriate protective eyeglasses or chemical
safety goggles as described by OSHA's eye and face
protection regulations in 29 CFR 1910.133 or European
Standard EN166.
Skin:
Wear appropriate protective gloves to prevent skin
exposure.
Clothing:
Wear appropriate protective clothing to prevent skin
exposure.
Respirators:
A respiratory protection program that meets OSHA's 29
CFR 1910.134 and ANSI Z88.2 requirements or European
Standard EN 149 must be followed whenever workplace
conditions warrant respirator use.

**** SECTION 9 - PHYSICAL AND CHEMICAL PROPERTIES ****

Physical State: Crystals
Color: off-white
Odor: None reported.
pH: Not available.
Vapor Pressure: Not available.
Viscosity: Not available.
Boiling Point: Decomposes
Freezing/Melting Point: 65.00 - 66.00 deg C
Autoignition Temperature: Not available.
Flash Point: 112 deg C ( 233.60 deg F)
Explosion Limits, lower: Not available.
Explosion Limits, upper: Not available.
Decomposition Temperature:
Solubility in water: Soluble.
Specific Gravity/Density: Not available.
Molecular Formula: C4H6O2S
Molecular Weight: 118.15

**** SECTION 10 - STABILITY AND REACTIVITY ****

Chemical Stability:
Stable under normal temperatures and pressures.
Conditions to Avoid:
Incompatible materials, dust generation, strong oxidants.
Incompatibilities with Other Materials:
Strong oxidizing agents.
Hazardous Decomposition Products:
Carbon monoxide, oxides of sulfur, carbon dioxide.
Hazardous Polymerization: Has not been reported.

**** SECTION 11 - TOXICOLOGICAL INFORMATION ****

RTECS#:
CAS# 77-79-2: XM9100000
LD50/LC50:
CAS# 77-79-2: Oral, mouse: LD50 = 1600 mg/kg; Oral, rat: LD50 = 2547
mg/kg; Skin, rabbit: LD50 = >5 gm/kg.
Carcinogenicity:
Butadiene sulfone -
Not listed by ACGIH, IARC, or NTP.
Other:
See actual entry in RTECS for complete information.

**** SECTION 12 - ECOLOGICAL INFORMATION ****

Ecotoxicity:
Estimated BCF value = 4.7. This value suggests that Butadiene sulfone
would not bioconcentrate in aquatic organisms. Estimated Koc value =
4. This Koc value suggests that this product will have very high
mobility in soil and will leach.

**** SECTION 13 - DISPOSAL CONSIDERATIONS ****

Dispose of in a manner consistent with federal, state, and local regulations.

**** SECTION 14 - TRANSPORT INFORMATION ****

IATA
Not regulated as a hazardous material.
IMO
Not regulated as a hazardous material.
RID/ADR
Not regulated as a hazardous material.

**** SECTION 15 - REGULATORY INFORMATION ****

European/International Regulations
European Labeling in Accordance with EC Directives
Hazard Symbols: XI
Risk Phrases:
R 36/37/38 Irritating to eyes, respiratory system
and skin.
Safety Phrases:
S 24/25 Avoid contact with skin and eyes.
WGK (Water Danger/Protection)
CAS# 77-79-2: 1
Canada
CAS# 77-79-2 is listed on Canada's DSL List.
CAS# 77-79-2 is not listed on Canada's Ingredient Disclosure List.
US FEDERAL
TSCA
CAS# 77-79-2 is listed on the TSCA inventory.

**** SECTION 16 - ADDITIONAL INFORMATION ****

MSDS Creation Date: 10/13/1998 Revision #2 Date: 3/18/2003

The information above is believed to be accurate and represents the best
information currently available to us. However, we make no warranty of
merchantability or any other warranty, express or implied, with respect to
such information, and we assume no liability resulting from its use. Users
should make their own investigations to determine the suitability of the
information for their particular purposes. In no way shall the company be
liable for any claims, losses, or damages of any third party or for lost
profits or any special, indirect, incidental, consequential or exemplary
damages, howsoever arising, even if the company has been advised of
the possibility of such damages.
--------------------------------------------------------------------------------
--------------------------------------------------------------------------------
Search More   
ALL MSDS PAGES IN THIS GROUP
NAMECAS
2-Methylcyclopropanecarboxylic Acid, 98% 29555-02-0
m-Phenylene diisocyanate 123-61-5
2-Dodecanol, 99% 10203-28-8
Oxalic Acid Bis(Benzylidenehydrazide), 97% (UV-Vis) 6629-10-3
5-Bromopyrimidine, 98% 4595-59-9
4,6-Diamino-2-Mercaptopyrimidine, Hemihydrate, 99% 1004-39-3
4-(4'-Aminophenylazo)-Phenylarsonic Acid 6966-64-9
2,4-Dicyano-3-Methylglutaramide, 99% 5447-66-5
Ethyl trimethylacetate, 98% 3938-95-2
2-Mercapto-4-methylpyrimidine hydrochloride, 99% 6959-66-6
1-Pyrrolidinecarboxaldehyde, 97% 3760-54-1
n-Methyleneglycinonitrile (trimer) 6865-92-5
5-Methoxytryptamine hydrochloride, 97% 66-83-1
Nifuroxime 555-15-7
N-Alpha-Acetyl-L-Histidine Monohydrate 99+% 39145-52-3
11-Bromoundecanoic acid, tech., 93% 2834-05-1
Tert.-Butyl Disulfide, 98% 110-06-5
4'-Dodecyloxyacetophenone, 94% (GC) 2175-80-6
Ethylmagnesium chloride, 25 wt% solution in tetrahydrofuran 109-99-9
Methyl Vinyl Ether/Maleic Acid Copolymer, Low Molecular Weight 25153-40-6
Chlorohydroquinone, tech., 90% 615-67-8
Tri-n-octylphosphine oxide, 97% 78-50-2
Silver proteinate (mild) 9008-42-8
Lead (IV) Oxide, P.A. 1309-60-0
1,4-Butane Sultone, 99+% 1633-83-6
4-Chloro-3-Iodobenzotrifluoride, 99% 672-57-1
Theophylline, Anhydrous, U.S.P./N.F. 58-55-9
P-Anisoyl Chloride, 99% 100-07-2
3-Carboxy-1,4-dimethyl-1h-pyrrole-2-acetic acid 33369-45-8
4-Amino-2,6-dichlorophenol, 98% 5930-28-9
Aminoguanidine Hemisulfate 996-19-0
N-Methylmorpholine hydrochloride, 99+% 3651-67-0
2-Chloro-4,6-dimethoxy-1,3,5-triazine, 98% 3140-73-6
1-Heptyne, 99% 628-71-7
(R)-(+)-2,2'-Bis(diphenylphosphino)- 1,1'-binaphthyl, 99+% 76189-55-4
2-Propene-1-Sulfonic Acid Sodium Salt (Pract) 2495-39-8
6-Amino-1-Hexanol, 94% 4048-33-3
2,5-Dibromonitrobenzene, 97% 3460-18-2
Rubidium Fluoride Hydrate, 99+% 16422-67-6
7-Chloro-2H-1,4-Benzothiazin-3(4H)-One,99% 5333-05-1
2-Methyl-2-Nitropropane, 99% 594-70-7
N-Ethyl-n-butylamine, 99% 13360-63-9
2,6-Dimethylaniline, 99% 87-62-7
2-Chloro-3-Methylquinoline, 97% 57876-69-4
3-Cyanobenzaldehyde, 99% 24964-64-5
N,N'-Diallyltartardiamide, 99+% 28843-34-7
3-Aminobenzonitrile, 99% 2237-30-1
2-Chloropyridine-n-oxide hydrochloride, 97% 20295-64-1
Sodium perchlorate 7601-89-0
Butadiene sulfone, 98% 77-79-2

Free MSDS Search ( Providing 250,000+ Material Properties )
Chemcas.com| Ads link:todaystock.net