**** SECTION 2 - COMPOSITION, INFORMATION ON INGREDIENTS ****
+----------------+--------------------------------------+----------+-----------+
| CAS# | Chemical Name | % | EINECS# |
|----------------|--------------------------------------|----------|-----------|
| 7601-89-0 |Sodium perchlorate | >98 | 231-511-9 |
+----------------+--------------------------------------+----------+-----------+
Hazard Symbols: XN O
Risk Phrases: 22 9
**** SECTION 3 - HAZARDS IDENTIFICATION ****
EMERGENCY OVERVIEW
Harmful if swallowed. Explosive when mixed with combustible
material.
Potential Health Effects
Eye:
Causes severe eye irritation.
Skin:
May cause skin irritation. Not expected to cause an allergic skin
reaction.
Ingestion:
May cause irritation of the digestive tract.
Inhalation:
May cause respiratory tract irritation.
Chronic:
May interfere with iodine uptake of the thyroid gland and enlarge
it.
**** SECTION 4 - FIRST AID MEASURES ****
Eyes:
Flush eyes with plenty of water for at least 15 minutes,
occasionally lifting the upper and lower eyelids. Get medical aid.
Skin:
Flush skin with plenty of water for at least 15 minutes while
removing contaminated clothing and shoes. Get medical aid if
irritation develops or persists. Wash clothing before reuse. Destroy
contaminated shoes.
Ingestion:
Do not induce vomiting. If victim is conscious and alert, give 2-4
cupfuls of milk or water. Never give anything by mouth to an
unconscious person. Get medical aid.
Inhalation:
Remove from exposure and move to fresh air immediately. If not
breathing, give artificial respiration. If breathing is difficult,
give oxygen. Get medical aid if cough or other symptoms appear. Do
NOT use mouth-to-mouth resuscitation.
Notes to Physician:
**** SECTION 5 - FIRE FIGHTING MEASURES ****
General Information:
As in any fire, wear a self-contained breathing apparatus in
pressure-demand, MSHA/NIOSH (approved or equivalent), and full
protective gear. Strong oxidizer. Contact with other material may
cause fire. During a fire, irritating and highly toxic gases may be
generated by thermal decomposition or combustion. Some oxidizers may
react explosively with hydrocarbons(fuel). May accelerate burning if
involved in a fire.
Extinguishing Media:
Use water only! May require flooding with water in order to
eliminate hazardous reactions since the materials generate their own
oxygen. For large fires flood fire with water from a distance. Carbon
dioxide may provide sufficient cooling to extinguish small fires, but
dry chemical powder is ineffective because it cannot smother a
self-sustaining fire.
**** SECTION 6 - ACCIDENTAL RELEASE MEASURES ****
General Information: Use proper personal protective equipment as indicated
in Section 8.
Spills/Leaks:
Vacuum or sweep up material and place into a suitable disposal
container. Clean up spills immediately, observing precautions in the
Protective Equipment section. Do not use combustible materials such
as paper towels to clean up spill.
**** SECTION 7 - HANDLING and STORAGE ****
Handling:
Wash thoroughly after handling. Remove contaminated clothing and
wash before reuse. Use with adequate ventilation. Minimize dust
generation and accumulation. Avoid contact with eyes, skin, and
clothing. Keep container tightly closed. Keep from contact with
clothing and other combustible materials. Avoid breathing dust.
Destroy contaminated leather clothing. Inform laundry personnel of
contaminant's hazards. Do not take working clothes home.
Storage:
Do not store near combustible materials. Store in a cool, dry,
well-ventilated area away from incompatible substances. Keep away
from reducing agents. Avoid storage on wood floors.
**** SECTION 8 - EXPOSURE CONTROLS, PERSONAL PROTECTION ****
Engineering Controls:
Facilities storing or utilizing this material should be equipped
with an eyewash facility and a safety shower. Use adequate
ventilation to keep airborne concentrations low.
Exposure Limits
CAS# 7601-89-0:
Personal Protective Equipment
Eyes:
Wear appropriate protective eyeglasses or chemical
safety goggles as described by OSHA's eye and face
protection regulations in 29 CFR 1910.133 or European
Standard EN166.
Skin:
Wear appropriate gloves to prevent skin exposure.
Clothing:
Wear appropriate clothing to prevent skin exposure.
Respirators:
Follow the OSHA respirator regulations found in 29
CFR 1910.134 or European Standard EN 149. Use a
NIOSH/MSHA or European Standard EN 149 approved
respirator if exposure limits are exceeded or if
irritation or other symptoms are experienced.
**** SECTION 9 - PHYSICAL AND CHEMICAL PROPERTIES ****
Physical State: Solid
Color: white
Odor: Odorless
pH: 6-8 (5% aq soln)
Vapor Pressure: Not available.
Viscosity: Not available.
Boiling Point: Not available.
Freezing/Melting Point: 482 deg C (dec)
Autoignition Temperature: Not available.
Flash Point: 400 deg C ( 752.00 deg F)
Explosion Limits, lower: Not available.
Explosion Limits, upper: Not available.
Decomposition Temperature: 482 deg C
Solubility in water: Soluble.
Specific Gravity/Density: 2.5
Molecular Formula: ClNaO4
Molecular Weight: 122.44
**** SECTION 10 - STABILITY AND REACTIVITY ****
Chemical Stability:
Stable under normal temperatures and pressures. Deliquescent
(tending to absorb atmospheric water vapor and become liquid).
Conditions to Avoid:
Dust generation, excess heat, contamination.
Incompatibilities with Other Materials:
Reducing agents, strong acids, amines, ammonia, finely powdered
metals, sulfur, hydrocarbons, combustible materials.
Hazardous Decomposition Products:
Hydrogen chloride, chlorine, oxygen, sodium oxide, chlorine dioxide,
which may be spontaneously explosive.
Hazardous Polymerization: Has not been reported.
**** SECTION 11 - TOXICOLOGICAL INFORMATION ****
RTECS#:
CAS# 7601-89-0: SC9800000
LD50/LC50:
CAS# 7601-89-0: Oral, rat: LD50 = 2100 mg/kg.
Carcinogenicity:
Sodium perchlorate -
Not listed by ACGIH, IARC, or NTP.
Other:
See actual entry in RTECS for complete information.
**** SECTION 12 - ECOLOGICAL INFORMATION ****
**** SECTION 13 - DISPOSAL CONSIDERATIONS ****
Dispose of in a manner consistent with federal, state, and local regulations.
**** SECTION 14 - TRANSPORT INFORMATION ****
IATA
Shipping Name: SODIUM PERCHLORATE
Hazard Class: 5.1
UN Number: 1502
Packing Group: II
IMO
Shipping Name: SODIUM PERCHLORATE
Hazard Class: 5.1
UN Number: 1502
Packing Group: II
RID/ADR
Shipping Name: SODIUM PERCHLORATE
Hazard Class: 5.1
UN Number: 1502
Packing group: II
**** SECTION 15 - REGULATORY INFORMATION ****
European/International Regulations
European Labeling in Accordance with EC Directives
Hazard Symbols: XN O
Risk Phrases:
R 22 Harmful if swallowed.
R 9 Explosive when mixed with combustible material.
Safety Phrases:
S 13 Keep away from food, drink and animal feeding
stuffs.
S 22 Do not breathe dust.
S 27 Take off immediately all contaminated clothing.
WGK (Water Danger/Protection)
CAS# 7601-89-0: 1
Canada
CAS# 7601-89-0 is listed on Canada's DSL List.
CAS# 7601-89-0 is not listed on Canada's Ingredient Disclosure List.
US FEDERAL
TSCA
CAS# 7601-89-0 is listed on the TSCA inventory.
**** SECTION 16 - ADDITIONAL INFORMATION ****
MSDS Creation Date: 9/02/1997 Revision #3 Date: 6/30/2004
The information above is believed to be accurate and represents the best
information currently available to us. However, we make no warranty of
merchantability or any other warranty, express or implied, with respect to
such information, and we assume no liability resulting from its use. Users
should make their own investigations to determine the suitability of the
information for their particular purposes. In no way shall the company be
liable for any claims, losses, or damages of any third party or for lost
profits or any special, indirect, incidental, consequential or exemplary
damages, howsoever arising, even if the company has been advised of
the possibility of such damages.
--------------------------------------------------------------------------------
--------------------------------------------------------------------------------
|
|
|
| ALL MSDS PAGES IN THIS GROUP
| | NAME | CAS |
|
2-Methylcyclopropanecarboxylic Acid, 98%
| 29555-02-0 |
|
m-Phenylene diisocyanate
| 123-61-5 |
|
2-Dodecanol, 99%
| 10203-28-8 |
|
Oxalic Acid Bis(Benzylidenehydrazide), 97% (UV-Vis)
| 6629-10-3 |
|
5-Bromopyrimidine, 98%
| 4595-59-9 |
|
4,6-Diamino-2-Mercaptopyrimidine, Hemihydrate, 99%
| 1004-39-3 |
|
4-(4'-Aminophenylazo)-Phenylarsonic Acid
| 6966-64-9 |
|
2,4-Dicyano-3-Methylglutaramide, 99%
| 5447-66-5 |
|
Ethyl trimethylacetate, 98%
| 3938-95-2 |
|
2-Mercapto-4-methylpyrimidine hydrochloride, 99%
| 6959-66-6 |
|
1-Pyrrolidinecarboxaldehyde, 97%
| 3760-54-1 |
|
n-Methyleneglycinonitrile (trimer)
| 6865-92-5 |
|
5-Methoxytryptamine hydrochloride, 97%
| 66-83-1 |
|
Nifuroxime
| 555-15-7 |
|
N-Alpha-Acetyl-L-Histidine Monohydrate 99+%
| 39145-52-3 |
|
11-Bromoundecanoic acid, tech., 93%
| 2834-05-1 |
|
Tert.-Butyl Disulfide, 98%
| 110-06-5 |
|
4'-Dodecyloxyacetophenone, 94% (GC)
| 2175-80-6 |
|
Ethylmagnesium chloride, 25 wt% solution in tetrahydrofuran
| 109-99-9 |
|
Methyl Vinyl Ether/Maleic Acid Copolymer, Low Molecular Weight
| 25153-40-6 |
|
Chlorohydroquinone, tech., 90%
| 615-67-8 |
|
Tri-n-octylphosphine oxide, 97%
| 78-50-2 |
|
Silver proteinate (mild)
| 9008-42-8 |
|
Lead (IV) Oxide, P.A.
| 1309-60-0 |
|
1,4-Butane Sultone, 99+%
| 1633-83-6 |
|
4-Chloro-3-Iodobenzotrifluoride, 99%
| 672-57-1 |
|
Theophylline, Anhydrous, U.S.P./N.F.
| 58-55-9 |
|
P-Anisoyl Chloride, 99%
| 100-07-2 |
|
3-Carboxy-1,4-dimethyl-1h-pyrrole-2-acetic acid
| 33369-45-8 |
|
4-Amino-2,6-dichlorophenol, 98%
| 5930-28-9 |
|
Aminoguanidine Hemisulfate
| 996-19-0 |
|
N-Methylmorpholine hydrochloride, 99+%
| 3651-67-0 |
|
2-Chloro-4,6-dimethoxy-1,3,5-triazine, 98%
| 3140-73-6 |
|
1-Heptyne, 99%
| 628-71-7 |
|
(R)-(+)-2,2'-Bis(diphenylphosphino)- 1,1'-binaphthyl, 99+%
| 76189-55-4 |
|
2-Propene-1-Sulfonic Acid Sodium Salt (Pract)
| 2495-39-8 |
|
6-Amino-1-Hexanol, 94%
| 4048-33-3 |
|
2,5-Dibromonitrobenzene, 97%
| 3460-18-2 |
|
Rubidium Fluoride Hydrate, 99+%
| 16422-67-6 |
|
7-Chloro-2H-1,4-Benzothiazin-3(4H)-One,99%
| 5333-05-1 |
|
2-Methyl-2-Nitropropane, 99%
| 594-70-7 |
|
N-Ethyl-n-butylamine, 99%
| 13360-63-9 |
|
2,6-Dimethylaniline, 99%
| 87-62-7 |
|
2-Chloro-3-Methylquinoline, 97%
| 57876-69-4 |
|
3-Cyanobenzaldehyde, 99%
| 24964-64-5 |
|
N,N'-Diallyltartardiamide, 99+%
| 28843-34-7 |
|
3-Aminobenzonitrile, 99%
| 2237-30-1 |
|
2-Chloropyridine-n-oxide hydrochloride, 97%
| 20295-64-1 |
|
Sodium perchlorate
| 7601-89-0 |
|
Butadiene sulfone, 98%
| 77-79-2 |
|
|