**** SECTION 2 - COMPOSITION, INFORMATION ON INGREDIENTS ****
+----------------+--------------------------------------+----------+-----------+
| CAS# | Chemical Name | % | EINECS# |
|----------------|--------------------------------------|----------|-----------|
| 30806-83-8 |Ethyl 4-Isocyanatobenzoate | >99 | 250-344-2 |
+----------------+--------------------------------------+----------+-----------+
Hazard Symbols: T
Risk Phrases: 23/24/25 36/37/38
**** SECTION 3 - HAZARDS IDENTIFICATION ****
EMERGENCY OVERVIEW
Toxic by inhalation, in contact with skin and if swallowed.
Irritating to eyes, respiratory system and skin.Moisture sensitive.
Potential Health Effects
Eye:
Causes eye irritation. May cause conjunctivitis, ulceration and
turbidity of the cornea.
Skin:
Causes skin irritation. May cause skin sensitization, an allergic
reaction, which becomes evident upon re-exposure to this material.
Ingestion:
May cause gastrointestinal irritation with nausea, vomiting and
diarrhea. May cause liver and kidney damage. The toxicological
properties of this substance have not been fully investigated.
Inhalation:
Causes respiratory tract irritation. The toxicological properties of
this substance have not been fully investigated. Exposure produces
central nervous system depression. At high concentrations,
isocyanates affect mucous membranes of the respiratory tract and may
lead to fatal pulmonary edema. Exposure to low and often even
unmeasurable isocyanate concentration results in sensitization. Can
produce delayed pulmonary edema. In rare instances, exposure may
cause sensitization, resulting in inflammation of the mucous
membranes and in eczematous eruptions.
Chronic:
May cause liver and kidney damage. Effects may be delayed. May cause
lung damage. Repeated or prolonged exposure may cause allergic
reactions in sensitive individuals. Inhalation of product may
aggravate existing chronic repiratory problems such as asthma,
emphysema or bronchitis.
**** SECTION 4 - FIRST AID MEASURES ****
Eyes:
Immediately flush eyes with plenty of water for at least 15 minutes,
occasionally lifting the upper and lower eyelids. Get medical aid. Do
NOT allow victim to rub eyes or keep eyes closed.
Skin:
Get medical aid. Flush skin with plenty of water for at least 15
minutes while removing contaminated clothing and shoes. Wash clothing
before reuse.
Ingestion:
Never give anything by mouth to an unconscious person. Get medical
aid. Do NOT induce vomiting. If conscious and alert, rinse mouth and
drink 2-4 cupfuls of milk or water.
Inhalation:
Remove from exposure and move to fresh air immediately. If not
breathing, give artificial respiration. If breathing is difficult,
give oxygen. Get medical aid. Do NOT use mouth-to-mouth
resuscitation.
Notes to Physician:
For ingestion, the stomach sould be intubated, aspirated, and
lavaged with a slurry of activated charcoal--protect the airway from
aspiration of gastric contents. Treat symptomatically and
supportively.
**** SECTION 5 - FIRE FIGHTING MEASURES ****
General Information:
As in any fire, wear a self-contained breathing apparatus in
pressure-demand, MSHA/NIOSH (approved or equivalent), and full
protective gear. During a fire, irritating and highly toxic gases
may be generated by thermal decomposition or combustion. Vapors may
be heavier than air. They can spread along the ground and collect
in low or confined areas.
Extinguishing Media:
Use agent most appropriate to extinguish fire. Do NOT get water
inside containers. Use water spray, dry chemical, carbon dioxide, or
appropriate foam.
**** SECTION 6 - ACCIDENTAL RELEASE MEASURES ****
General Information: Use proper personal protective equipment as indicated
in Section 8.
Spills/Leaks:
Clean up spills immediately, observing precautions in the Protective
Equipment section. Sweep up, then place into a suitable container for
disposal. Avoid generating dusty conditions. Provide ventilation. Do
not get water inside containers.
**** SECTION 7 - HANDLING and STORAGE ****
Handling:
Wash thoroughly after handling. Use with adequate ventilation.
Minimize dust generation and accumulation. Avoid contact with eyes,
skin, and clothing. Keep container tightly closed. Avoid ingestion
and inhalation. Do not allow contact with water. Wash clothing
before reuse. Discard contaminated shoes. Keep from contact with
moist air and steam.
Storage:
Store in a tightly closed container. Store in a cool, dry,
well-ventilated area away from incompatible substances. Keep
refrigerated. (Store below 4C/39F.) Store protected from moisture.
**** SECTION 8 - EXPOSURE CONTROLS, PERSONAL PROTECTION ****
Engineering Controls:
Facilities storing or utilizing this material should be equipped
with an eyewash facility and a safety shower. Use adequate
ventilation to keep airborne concentrations low.
Exposure Limits
CAS# 30806-83-8:
Personal Protective Equipment
Eyes:
Wear appropriate protective eyeglasses or chemical
safety goggles as described by OSHA's eye and face
protection regulations in 29 CFR 1910.133 or European
Standard EN166.
Skin:
Wear appropriate protective gloves to prevent skin
exposure.
Clothing:
Wear appropriate protective clothing to prevent skin
exposure.
Respirators:
A respiratory protection program that meets OSHA's 29
CFR 1910.134 and ANSI Z88.2 requirements or European
Standard EN 149 must be followed whenever workplace
conditions warrant respirator use.
**** SECTION 9 - PHYSICAL AND CHEMICAL PROPERTIES ****
Physical State: Solid
Color: after melting, clear colorless
Odor: None reported.
pH: Not available.
Vapor Pressure: Not available.
Viscosity: Not available.
Boiling Point: Not available.
Freezing/Melting Point: 27.00 - 29.00 deg C
Autoignition Temperature: Not applicable.
Flash Point: > 112 deg C (> 233.60 deg F)
Explosion Limits, lower: Not available.
Explosion Limits, upper: Not available.
Decomposition Temperature:
Solubility in water:
Specific Gravity/Density:
Molecular Formula: C10H9NO3
Molecular Weight: 191.19
**** SECTION 10 - STABILITY AND REACTIVITY ****
Chemical Stability:
Stable at room temperature in closed containers under normal storage
and handling conditions.
Conditions to Avoid:
Incompatible materials, moisture, excess heat.
Incompatibilities with Other Materials:
Moisture.
Hazardous Decomposition Products:
Hydrogen cyanide, nitrogen oxides, carbon monoxide, irritating and
toxic fumes and gases, carbon dioxide, nitrogen, hydrocarbons.
Hazardous Polymerization: Has not been reported.
**** SECTION 11 - TOXICOLOGICAL INFORMATION ****
RTECS#:
CAS# 30806-83-8 unlisted.
LD50/LC50:
Not available.
Carcinogenicity:
Ethyl 4-Isocyanatobenzoate -
Not listed by ACGIH, IARC, or NTP.
**** SECTION 12 - ECOLOGICAL INFORMATION ****
**** SECTION 13 - DISPOSAL CONSIDERATIONS ****
Dispose of in a manner consistent with federal, state, and local regulations.
**** SECTION 14 - TRANSPORT INFORMATION ****
IATA
Shipping Name: ISOCYANATES, TOXIC, N.O.S.*
Hazard Class: 6.1
UN Number: 2206
Packing Group: II
IMO
Shipping Name: ISOCYANATES, TOXIC, N.O.S.
Hazard Class: 6.1
UN Number: 2206
Packing Group: II
RID/ADR
Shipping Name: ISOCYANATES, TOXIC, N.O.S.
Hazard Class: 6.1
UN Number: 2206
Packing group: II
**** SECTION 15 - REGULATORY INFORMATION ****
European/International Regulations
European Labeling in Accordance with EC Directives
Hazard Symbols: T
Risk Phrases:
R 23/24/25 Toxic by inhalation, in contact with skin
and if swallowed.
R 36/37/38 Irritating to eyes, respiratory system
and skin.
Safety Phrases:
S 28A After contact with skin, wash immediately with
plenty of water.
S 36/37/39 Wear suitable protective clothing, gloves
and eye/face protection.
S 37 Wear suitable gloves.
S 45 In case of accident or if you feel unwell, seek
medical advice immediately (show the label where
possible).
WGK (Water Danger/Protection)
CAS# 30806-83-8: No information available.
Canada
None of the chemicals in this product are listed on the DSL/NDSL list.
CAS# 30806-83-8 is not listed on Canada's Ingredient Disclosure List.
US FEDERAL
TSCA
CAS# 30806-83-8 is not listed on the TSCA inventory.
It is for research and development use only.
**** SECTION 16 - ADDITIONAL INFORMATION ****
MSDS Creation Date: 9/02/1997 Revision #8 Date: 3/18/2003
The information above is believed to be accurate and represents the best
information currently available to us. However, we make no warranty of
merchantability or any other warranty, express or implied, with respect to
such information, and we assume no liability resulting from its use. Users
should make their own investigations to determine the suitability of the
information for their particular purposes. In no way shall the company be
liable for any claims, losses, or damages of any third party or for lost
profits or any special, indirect, incidental, consequential or exemplary
damages, howsoever arising, even if the company has been advised of
the possibility of such damages.
--------------------------------------------------------------------------------
--------------------------------------------------------------------------------
|
|
|
| ALL MSDS PAGES IN THIS GROUP
| | NAME | CAS |
|
4-Benzyloxy-3-Pyrrolin-2-One, ca. 93%(TLC)
| 113896-95-0 |
|
Bromotriphenylethylene, 98%
| 1607-57-4 |
|
3,5-Dibromo-4-hydroxybenzonitrile, 98%
| 1689-84-5 |
|
Poly(cyclohexyl methacrylate), powder
| 25768-50-7 |
|
4'-Hydroxyacetophenone, 98%
| 99-93-4 |
|
2-Methylsulphonylbenzoic Acid, 95+%
| 33963-55-2 |
|
3-Nitro-2-Butanol, 99+%
| 6270-16-2 |
|
Tributyl borate, 98%
| 688-74-4 |
|
Trans-2-Nonenal, 95%
| 18829-56-6 |
|
S-Butyrylthiocholine Iodide, 98%
| 1866-16-6 |
|
3-Butyn-1-ol, 97%
| 927-74-2 |
|
4-Ethyl-2,3-Dioxo-1-Piperazinecarbonyl-chloride, tech.
| 59662-31-6 |
|
(1R)-Chrysanthemolactone, 99+%
| 14087-70-8 |
|
5-Fluoro-2-nitrotoluene, 96%
| 446-33-3 |
|
Dimethyl suberate, 99%
| 1732-09-8 |
|
1-Naphthalenethiol
| 529-36-2 |
|
4-Fluoro-2-methylanisole, 97%
| |
|
Poly(Isobutyl Methacrylate), Sec. Stand., Aver.M.W 300.000, Aver.MN
| 9011-15-8 |
|
Ethyl 4-Isocyanatobenzoate, 99+%
| 30806-83-8 |
|
trans-2-Methyl-1,3-pentadiene, 99%
| 926-54-5 |
|
Rhenium Atomic Absorption Standard Solution, 1 mg/ml Re in 1% HNO3
| 7440-15-5 |
|
2,6-Dichlorobenzamide, 97%
| 2008-58-4 |
|
bis(2-Ethylhexyl) hydrogen phosphate (techn), 95% (titr.)
| 298-07-7 |
|
1-Ethynyl-1-cyclohexanol, 99+%
| 78-27-3 |
|
Isobutyl formate, 96%
| 542-55-2 |
|
2,6-Dimethyl-gamma-pyrone, 99%
| 1004-36-0 |
|
5-Aminoisoquinoline, 99%
| 1125-60-6 |
|
Methyl-Alpha-D-Galactopyranoside Monohydrate, 99+%
| 34004-14-3 |
|
Tropine-n-oxide dihydrate, 99%
| 35772-43-1 |
|
Amberlite cg-50 - type i ion-exchange resi n
| 9042-11-9 |
|
4-Chloro-1-Methylpiperidine Hydrochloride, 97%
| 5382-23-0 |
|
3,4-Diaminobenzophenone Monohydrochloride 97%
| 57070-71-0 |
|
Calcium Chloride Hexahydrate
| 7774-34-7 |
|
2',4',6'-Trihydroxyacetophenone Monohydrate, 98%
| 480-66-0 |
|
1-(3-Tolyl)Piperazine Dihydrochloride, 97% (TLC)
| 13078-13-2 |
|
Acriflavine
| 8048-52-0 |
|
Flavanone, 98%
| 487-26-3 |
|
Methyl 4-Acetylbenzoate, 99+% (GC)
| 3609-53-8 |
|
3-Fluoro-dl-Tyrosine, 99%
| 403-90-7 |
|
2,5-Dinitrotoluene
| 619-15-8 |
|
N-(3-Chloropropyl)piperidine hydrochloride, 97%
| 5472-49-1 |
|
2-Acetoacetoxyethyl metacrylate,95+%(GC)
| 21282-97-3 |
|
6-Methyl-2,4-Heptanedione, 98% (GC)
| 3002-23-1 |
|
s-Trithiane, 97%
| 291-21-4 |
|
Trimethylamine,45 wt% aqueous solution
| 75-50-3 |
|
4-Hydroxyphenylacetic Acid, 98%
| 156-38-7 |
|
3'-(Trifluoromethyl)acetophenone, 99%
| 349-76-8 |
|
3,4,5-Trimethoxybenzonitrile, 97%
| 1885-35-4 |
|
3-Hydroxy-6-Methylpyridine, 99%
| 1121-78-4 |
|
Poly(2-acrylamido-2-methyl-1-propanesulfonic acid-co-styrene)
| 51121-85-8 |
|
|