Search   
MSDS 
:
 trans-2-Methyl-1,3-pentadiene, 99%
CAS 
:
 926-54-5
SYNONYMS 
:
 
**** SECTION 2 - COMPOSITION, INFORMATION ON INGREDIENTS ****

+----------------+--------------------------------------+----------+-----------+
| CAS# | Chemical Name | % | EINECS# |
|----------------|--------------------------------------|----------|-----------|
| 926-54-5 |trans-2-Methyl-1,3-pentadiene | 99 | 213-136-2 |
+----------------+--------------------------------------+----------+-----------+
Hazard Symbols: XI F
Risk Phrases: 11 36/37/38

**** SECTION 3 - HAZARDS IDENTIFICATION ****

EMERGENCY OVERVIEW
Highly flammable. Irritating to eyes, respiratory system and skin.

Potential Health Effects
Eye:
Causes eye irritation.
Skin:
Causes skin irritation.
Ingestion:
Causes gastrointestinal irritation with nausea, vomiting and
diarrhea.
Inhalation:
Causes respiratory tract irritation. Vapors may cause dizziness or
suffocation.
Chronic:
No information found.

**** SECTION 4 - FIRST AID MEASURES ****

Eyes:
Flush eyes with plenty of water for at least 15 minutes,
occasionally lifting the upper and lower eyelids. Get medical aid
immediately.
Skin:
Get medical aid. Flush skin with plenty of water for at least 15
minutes while removing contaminated clothing and shoes. Wash clothing
before reuse.
Ingestion:
If victim is conscious and alert, give 2-4 cupfuls of milk or water.
Never give anything by mouth to an unconscious person. Get medical
aid immediately.
Inhalation:
Remove from exposure and move to fresh air immediately. If not
breathing, give artificial respiration. If breathing is difficult,
give oxygen. Get medical aid.
Notes to Physician:
Treat symptomatically and supportively.

**** SECTION 5 - FIRE FIGHTING MEASURES ****

General Information:
As in any fire, wear a self-contained breathing apparatus in
pressure-demand, MSHA/NIOSH (approved or equivalent), and full
protective gear. Vapors may form an explosive mixture with air.
Vapors can travel to a source of ignition and flash back. During a
fire, irritating and highly toxic gases may be generated by thermal
decomposition or combustion. Will burn if involved in a fire. Use
water spray to keep fire-exposed containers cool. Extremely flammable
liquid and vapor. Water may be ineffective. Material is lighter than
water and a fire may be spread by the use of water. Containers may
explode in the heat of a fire. Vapors may be heavier than air. They
can spread along the ground and collect in low or confined areas.
Will be easily ignited by heat, sparks or flame.
Extinguishing Media:
For small fires, use dry chemical, carbon dioxide, water spray or
alcohol-resistant foam. For large fires, use water spray, fog, or
alcohol-resistant foam. Use water spray to cool fire-exposed
containers. Water may be ineffective. This material is lighter than
water and insoluble in water. The fire could easily be spread by the
use of water in an area where the water cannot be contained. Use
agent most appropriate to extinguish fire. Do NOT use straight
streams of water.

**** SECTION 6 - ACCIDENTAL RELEASE MEASURES ****

General Information: Use proper personal protective equipment as indicated
in Section 8.
Spills/Leaks:
Absorb spill with inert material (e.g. vermiculite, sand or earth),
then place in suitable container. Avoid runoff into storm sewers and
ditches which lead to waterways. Clean up spills immediately,
observing precautions in the Protective Equipment section. Remove all
sources of ignition. Use a spark-proof tool. Provide ventilation. A
vapor suppressing foam may be used to reduce vapors.

**** SECTION 7 - HANDLING and STORAGE ****

Handling:
Ground and bond containers when transferring material. Use
spark-proof tools and explosion proof equipment. Avoid contact with
eyes, skin, and clothing. Empty containers retain product residue,
(liquid and/or vapor), and can be dangerous. Keep container tightly
closed. Keep away from heat, sparks and flame. Avoid ingestion and
inhalation. Use with adequate ventilation. Wash clothing before
reuse. Do not pressurize, cut, weld, braze, solder, drill, grind, or
expose empty containers to heat, sparks or open flames.
Storage:
Keep away from heat, sparks, and flame. Keep away from sources of
ignition. Store in a tightly closed container. Store in a cool, dry,
well-ventilated area away from incompatible substances.
Refrigerator/flammables.

**** SECTION 8 - EXPOSURE CONTROLS, PERSONAL PROTECTION ****

Engineering Controls:
Facilities storing or utilizing this material should be equipped
with an eyewash facility and a safety shower. Use adequate
ventilation to keep airborne concentrations low.
Exposure Limits
CAS# 926-54-5:


Personal Protective Equipment

Eyes:
Wear appropriate protective eyeglasses or chemical
safety goggles as described by OSHA's eye and face
protection regulations in 29 CFR 1910.133 or European
Standard EN166.
Skin:
Wear appropriate gloves to prevent skin exposure.
Clothing:
Wear appropriate protective gloves to prevent skin
exposure.
Respirators:
A respiratory protection program that meets OSHA's 29
CFR 1910.134 and ANSI Z88.2 requirements or European
Standard EN 149 must be followed whenever workplace
conditions warrant respirator use.

**** SECTION 9 - PHYSICAL AND CHEMICAL PROPERTIES ****

Physical State: Clear liquid
Color: Clear, Colorless Liquid
Odor: None reported.
pH: Not available.
Vapor Pressure: Not available.
Viscosity: Not available.
Boiling Point: 75.0 - 76.0 deg C @ 760.00mmH
Freezing/Melting Point: Not available.
Autoignition Temperature: Not available.
Flash Point: -18 deg C ( -0.40 deg F)
Explosion Limits, lower: Not available.
Explosion Limits, upper: Not available.
Decomposition Temperature:
Solubility in water: insoluble
Specific Gravity/Density: .7180g/cm3
Molecular Formula: C6H10
Molecular Weight: 82.13

**** SECTION 10 - STABILITY AND REACTIVITY ****

Chemical Stability:
Stable under normal temperatures and pressures.
Conditions to Avoid:
Incompatible materials, ignition sources, excess heat, strong
oxidants.
Incompatibilities with Other Materials:
Strong oxidizing agents.
Hazardous Decomposition Products:
Carbon monoxide, carbon dioxide.
Hazardous Polymerization: Has not been reported.

**** SECTION 11 - TOXICOLOGICAL INFORMATION ****

RTECS#:
CAS# 926-54-5 unlisted.
LD50/LC50:
Not available.
Carcinogenicity:
trans-2-Methyl-1,3-pentadiene -
Not listed by ACGIH, IARC, or NTP.

**** SECTION 12 - ECOLOGICAL INFORMATION ****



**** SECTION 13 - DISPOSAL CONSIDERATIONS ****

Dispose of in a manner consistent with federal, state, and local regulations.

**** SECTION 14 - TRANSPORT INFORMATION ****

IATA
Shipping Name: METHYLPENTADIENE
Hazard Class: 3
UN Number: 2461
Packing Group: II
IMO
Shipping Name: METHYLPENTADIENE
Hazard Class: 3.1
UN Number: 2461
Packing Group: II
RID/ADR
Shipping Name: METHYLPENTADIENES
Hazard Class: 3
UN Number: 2461
Packing group: II

**** SECTION 15 - REGULATORY INFORMATION ****

European/International Regulations
European Labeling in Accordance with EC Directives
Hazard Symbols: XI F
Risk Phrases:
R 11 Highly flammable.
R 36/37/38 Irritating to eyes, respiratory system
and skin.
Safety Phrases:
S 7/9 Keep container tightly closed and in a
well-ventilated place.
S 9 Keep container in a well-ventilated place.
S 16 Keep away from sources of ignition - No
smoking.
S 29 Do not empty into drains.
S 33 Take precautionary measures against static
discharges.
WGK (Water Danger/Protection)
CAS# 926-54-5: No information available.
Canada
None of the chemicals in this product are listed on the DSL/NDSL list.
CAS# 926-54-5 is not listed on Canada's Ingredient Disclosure List.
US FEDERAL
TSCA
CAS# 926-54-5 is not listed on the TSCA inventory.
It is for research and development use only.

**** SECTION 16 - ADDITIONAL INFORMATION ****

MSDS Creation Date: 11/22/1998 Revision #3 Date: 3/18/2003

The information above is believed to be accurate and represents the best
information currently available to us. However, we make no warranty of
merchantability or any other warranty, express or implied, with respect to
such information, and we assume no liability resulting from its use. Users
should make their own investigations to determine the suitability of the
information for their particular purposes. In no way shall the company be
liable for any claims, losses, or damages of any third party or for lost
profits or any special, indirect, incidental, consequential or exemplary
damages, howsoever arising, even if the company has been advised of
the possibility of such damages.
--------------------------------------------------------------------------------
--------------------------------------------------------------------------------
Search More   
ALL MSDS PAGES IN THIS GROUP
NAMECAS
4-Benzyloxy-3-Pyrrolin-2-One, ca. 93%(TLC) 113896-95-0
Bromotriphenylethylene, 98% 1607-57-4
3,5-Dibromo-4-hydroxybenzonitrile, 98% 1689-84-5
Poly(cyclohexyl methacrylate), powder 25768-50-7
4'-Hydroxyacetophenone, 98% 99-93-4
2-Methylsulphonylbenzoic Acid, 95+% 33963-55-2
3-Nitro-2-Butanol, 99+% 6270-16-2
Tributyl borate, 98% 688-74-4
Trans-2-Nonenal, 95% 18829-56-6
S-Butyrylthiocholine Iodide, 98% 1866-16-6
3-Butyn-1-ol, 97% 927-74-2
4-Ethyl-2,3-Dioxo-1-Piperazinecarbonyl-chloride, tech. 59662-31-6
(1R)-Chrysanthemolactone, 99+% 14087-70-8
5-Fluoro-2-nitrotoluene, 96% 446-33-3
Dimethyl suberate, 99% 1732-09-8
1-Naphthalenethiol 529-36-2
4-Fluoro-2-methylanisole, 97%
Poly(Isobutyl Methacrylate), Sec. Stand., Aver.M.W 300.000, Aver.MN 9011-15-8
Ethyl 4-Isocyanatobenzoate, 99+% 30806-83-8
trans-2-Methyl-1,3-pentadiene, 99% 926-54-5
Rhenium Atomic Absorption Standard Solution, 1 mg/ml Re in 1% HNO3 7440-15-5
2,6-Dichlorobenzamide, 97% 2008-58-4
bis(2-Ethylhexyl) hydrogen phosphate (techn), 95% (titr.) 298-07-7
1-Ethynyl-1-cyclohexanol, 99+% 78-27-3
Isobutyl formate, 96% 542-55-2
2,6-Dimethyl-gamma-pyrone, 99% 1004-36-0
5-Aminoisoquinoline, 99% 1125-60-6
Methyl-Alpha-D-Galactopyranoside Monohydrate, 99+% 34004-14-3
Tropine-n-oxide dihydrate, 99% 35772-43-1
Amberlite cg-50 - type i ion-exchange resi n 9042-11-9
4-Chloro-1-Methylpiperidine Hydrochloride, 97% 5382-23-0
3,4-Diaminobenzophenone Monohydrochloride 97% 57070-71-0
Calcium Chloride Hexahydrate 7774-34-7
2',4',6'-Trihydroxyacetophenone Monohydrate, 98% 480-66-0
1-(3-Tolyl)Piperazine Dihydrochloride, 97% (TLC) 13078-13-2
Acriflavine 8048-52-0
Flavanone, 98% 487-26-3
Methyl 4-Acetylbenzoate, 99+% (GC) 3609-53-8
3-Fluoro-dl-Tyrosine, 99% 403-90-7
2,5-Dinitrotoluene 619-15-8
N-(3-Chloropropyl)piperidine hydrochloride, 97% 5472-49-1
2-Acetoacetoxyethyl metacrylate,95+%(GC) 21282-97-3
6-Methyl-2,4-Heptanedione, 98% (GC) 3002-23-1
s-Trithiane, 97% 291-21-4
Trimethylamine,45 wt% aqueous solution 75-50-3
4-Hydroxyphenylacetic Acid, 98% 156-38-7
3'-(Trifluoromethyl)acetophenone, 99% 349-76-8
3,4,5-Trimethoxybenzonitrile, 97% 1885-35-4
3-Hydroxy-6-Methylpyridine, 99% 1121-78-4
Poly(2-acrylamido-2-methyl-1-propanesulfonic acid-co-styrene) 51121-85-8

Free MSDS Search ( Providing 250,000+ Material Properties )
Chemcas.com| Ads link:todaystock.net