Search   
MSDS 
:
 4-Fluoro-2-methylanisole, 97%
CAS 
:
 
SYNONYMS 
:
 4-Flouro-2-methyl-1-methoxybenzene
**** SECTION 2 - COMPOSITION, INFORMATION ON INGREDIENTS ****

+----------------+--------------------------------------+----------+-----------+
| CAS# | Chemical Name | % | EINECS# |
|----------------|--------------------------------------|----------|-----------|
+----------------+--------------------------------------+----------+-----------+
Hazard Symbols: XI
Risk Phrases: 36/37/38

**** SECTION 3 - HAZARDS IDENTIFICATION ****

EMERGENCY OVERVIEW
Irritating to eyes, respiratory system and skin.

Potential Health Effects
Eye:
Causes eye irritation.
Skin:
Causes skin irritation.
Ingestion:
The toxicological properties of this substance have not been fully
investigated.
Inhalation:
Causes respiratory tract irritation.
Chronic:
Not available.

**** SECTION 4 - FIRST AID MEASURES ****

Eyes:
Flush eyes with plenty of water for at least 15 minutes,
occasionally lifting the upper and lower eyelids. Get medical aid.
Skin:
Flush skin with plenty of water for at least 15 minutes while
removing contaminated clothing and shoes. Get medical aid if
irritation develops or persists.
Ingestion:
Get medical aid. Wash mouth out with water.
Inhalation:
Remove from exposure and move to fresh air immediately. Get medical
aid if cough or other symptoms appear.
Notes to Physician:

**** SECTION 5 - FIRE FIGHTING MEASURES ****

General Information:
As in any fire, wear a self-contained breathing apparatus in
pressure-demand, MSHA/NIOSH (approved or equivalent), and full
protective gear. Will burn if involved in a fire.
Extinguishing Media:
Use water spray, dry chemical, carbon dioxide, or chemical foam.

**** SECTION 6 - ACCIDENTAL RELEASE MEASURES ****

General Information: Use proper personal protective equipment as indicated
in Section 8.
Spills/Leaks:
Absorb spill with inert material (e.g. vermiculite, sand or earth),
then place in suitable container.

**** SECTION 7 - HANDLING and STORAGE ****

Handling:
Avoid breathing dust, vapor, mist, or gas. Avoid contact with skin
and eyes.
Storage:
Keep away from sources of ignition. Store in a cool, dry place.
Store in a tightly closed container.

**** SECTION 8 - EXPOSURE CONTROLS, PERSONAL PROTECTION ****

Engineering Controls:
Facilities storing or utilizing this material should be equipped
with an eyewash facility and a safety shower.
Exposure Limits

Personal Protective Equipment

Eyes:
Wear chemical splash goggles.
Skin:
Wear appropriate protective gloves to prevent skin
exposure.
Clothing:
Wear a chemical apron.
Respirators:
Follow the OSHA respirator regulations found in 29
CFR 1910.134 or European Standard EN 149. Use a
NIOSH/MSHA or European Standard EN 149 approved
respirator if exposure limits are exceeded or if
irritation or other symptoms are experienced.

**** SECTION 9 - PHYSICAL AND CHEMICAL PROPERTIES ****

Physical State: Liquid
Color: clear, colorless
Odor: Not available.
pH: Not available.
Vapor Pressure: Not available.
Viscosity: Not available.
Boiling Point: Not available.
Freezing/Melting Point: Not available.
Autoignition Temperature: Not available.
Flash Point: Not available.
Explosion Limits, lower: Not available.
Explosion Limits, upper: Not available.
Decomposition Temperature:
Solubility in water:
Specific Gravity/Density:
Molecular Formula: C8H9FO
Molecular Weight: 140.16

**** SECTION 10 - STABILITY AND REACTIVITY ****

Chemical Stability:
Not available.
Conditions to Avoid:
Not available.
Incompatibilities with Other Materials:
Strong oxidizing agents.
Hazardous Decomposition Products:
Carbon monoxide, carbon dioxide, hydrogen fluoride gas.
Hazardous Polymerization: Has not been reported.

**** SECTION 11 - TOXICOLOGICAL INFORMATION ****

RTECS#:
No CAS#s in product.
LD50/LC50:
Carcinogenicity:

**** SECTION 12 - ECOLOGICAL INFORMATION ****



**** SECTION 13 - DISPOSAL CONSIDERATIONS ****

Dispose of in a manner consistent with federal, state, and local regulations.

**** SECTION 14 - TRANSPORT INFORMATION ****

IATA
Not regulated as a hazardous material.
IMO
Not regulated as a hazardous material.
RID/ADR
Not regulated as a hazardous material.

**** SECTION 15 - REGULATORY INFORMATION ****

European/International Regulations
European Labeling in Accordance with EC Directives
Hazard Symbols: XI
Risk Phrases:
R 36/37/38 Irritating to eyes, respiratory system
and skin.
Safety Phrases:
S 26 In case of contact with eyes, rinse immediately
with plenty of water and seek medical advice.
S 37/39 Wear suitable gloves and eye/face
protection.
WGK (Water Danger/Protection)
Canada
None of the chemicals in this product are listed on the DSL/NDSL list.
US FEDERAL
TSCA

**** SECTION 16 - ADDITIONAL INFORMATION ****

MSDS Creation Date: 9/02/1997 Revision #2 Date: 3/18/2003

The information above is believed to be accurate and represents the best
information currently available to us. However, we make no warranty of
merchantability or any other warranty, express or implied, with respect to
such information, and we assume no liability resulting from its use. Users
should make their own investigations to determine the suitability of the
information for their particular purposes. In no way shall the company be
liable for any claims, losses, or damages of any third party or for lost
profits or any special, indirect, incidental, consequential or exemplary
damages, howsoever arising, even if the company has been advised of
the possibility of such damages.
--------------------------------------------------------------------------------
--------------------------------------------------------------------------------
Search More   
ALL MSDS PAGES IN THIS GROUP
NAMECAS
4-Benzyloxy-3-Pyrrolin-2-One, ca. 93%(TLC) 113896-95-0
Bromotriphenylethylene, 98% 1607-57-4
3,5-Dibromo-4-hydroxybenzonitrile, 98% 1689-84-5
Poly(cyclohexyl methacrylate), powder 25768-50-7
4'-Hydroxyacetophenone, 98% 99-93-4
2-Methylsulphonylbenzoic Acid, 95+% 33963-55-2
3-Nitro-2-Butanol, 99+% 6270-16-2
Tributyl borate, 98% 688-74-4
Trans-2-Nonenal, 95% 18829-56-6
S-Butyrylthiocholine Iodide, 98% 1866-16-6
3-Butyn-1-ol, 97% 927-74-2
4-Ethyl-2,3-Dioxo-1-Piperazinecarbonyl-chloride, tech. 59662-31-6
(1R)-Chrysanthemolactone, 99+% 14087-70-8
5-Fluoro-2-nitrotoluene, 96% 446-33-3
Dimethyl suberate, 99% 1732-09-8
1-Naphthalenethiol 529-36-2
4-Fluoro-2-methylanisole, 97%
Poly(Isobutyl Methacrylate), Sec. Stand., Aver.M.W 300.000, Aver.MN 9011-15-8
Ethyl 4-Isocyanatobenzoate, 99+% 30806-83-8
trans-2-Methyl-1,3-pentadiene, 99% 926-54-5
Rhenium Atomic Absorption Standard Solution, 1 mg/ml Re in 1% HNO3 7440-15-5
2,6-Dichlorobenzamide, 97% 2008-58-4
bis(2-Ethylhexyl) hydrogen phosphate (techn), 95% (titr.) 298-07-7
1-Ethynyl-1-cyclohexanol, 99+% 78-27-3
Isobutyl formate, 96% 542-55-2
2,6-Dimethyl-gamma-pyrone, 99% 1004-36-0
5-Aminoisoquinoline, 99% 1125-60-6
Methyl-Alpha-D-Galactopyranoside Monohydrate, 99+% 34004-14-3
Tropine-n-oxide dihydrate, 99% 35772-43-1
Amberlite cg-50 - type i ion-exchange resi n 9042-11-9
4-Chloro-1-Methylpiperidine Hydrochloride, 97% 5382-23-0
3,4-Diaminobenzophenone Monohydrochloride 97% 57070-71-0
Calcium Chloride Hexahydrate 7774-34-7
2',4',6'-Trihydroxyacetophenone Monohydrate, 98% 480-66-0
1-(3-Tolyl)Piperazine Dihydrochloride, 97% (TLC) 13078-13-2
Acriflavine 8048-52-0
Flavanone, 98% 487-26-3
Methyl 4-Acetylbenzoate, 99+% (GC) 3609-53-8
3-Fluoro-dl-Tyrosine, 99% 403-90-7
2,5-Dinitrotoluene 619-15-8
N-(3-Chloropropyl)piperidine hydrochloride, 97% 5472-49-1
2-Acetoacetoxyethyl metacrylate,95+%(GC) 21282-97-3
6-Methyl-2,4-Heptanedione, 98% (GC) 3002-23-1
s-Trithiane, 97% 291-21-4
Trimethylamine,45 wt% aqueous solution 75-50-3
4-Hydroxyphenylacetic Acid, 98% 156-38-7
3'-(Trifluoromethyl)acetophenone, 99% 349-76-8
3,4,5-Trimethoxybenzonitrile, 97% 1885-35-4
3-Hydroxy-6-Methylpyridine, 99% 1121-78-4
Poly(2-acrylamido-2-methyl-1-propanesulfonic acid-co-styrene) 51121-85-8

Free MSDS Search ( Providing 250,000+ Material Properties )
Chemcas.com| Ads link:todaystock.net