**** SECTION 2 - COMPOSITION, INFORMATION ON INGREDIENTS ****
+----------------+--------------------------------------+----------+-----------+
| CAS# | Chemical Name | % | EINECS# |
|----------------|--------------------------------------|----------|-----------|
| 542-55-2 |Isobutyl formate | 96% | 208-818-1 |
+----------------+--------------------------------------+----------+-----------+
Hazard Symbols: F
Risk Phrases: 11
**** SECTION 3 - HAZARDS IDENTIFICATION ****
EMERGENCY OVERVIEW
Highly flammable.The toxicological properties of this material have
not been fully investigated.
Potential Health Effects
Eye:
May cause severe eye irritation.
Skin:
May cause skin irritation.
Ingestion:
May cause irritation of the digestive tract.
Inhalation:
May cause respiratory tract irritation.
Chronic:
Not available.
**** SECTION 4 - FIRST AID MEASURES ****
Eyes:
Flush eyes with plenty of water for at least 15 minutes,
occasionally lifting the upper and lower eyelids. Get medical aid.
Skin:
Flush skin with plenty of water for at least 15 minutes while
removing contaminated clothing and shoes. Get medical aid if
irritation develops or persists.
Ingestion:
If victim is conscious and alert, give 2-4 cupfuls of milk or water.
Never give anything by mouth to an unconscious person. Get medical
aid.
Inhalation:
Remove from exposure and move to fresh air immediately. Get medical
aid if cough or other symptoms appear.
Notes to Physician:
**** SECTION 5 - FIRE FIGHTING MEASURES ****
General Information:
Containers can build up pressure if exposed to heat and/or fire. As
in any fire, wear a self-contained breathing apparatus in
pressure-demand, MSHA/NIOSH (approved or equivalent), and full
protective gear. Vapors may form an explosive mixture with air.
Vapors can travel to a source of ignition and flash back. Flammable
Liquid. Can release vapors that form explosive mixtures at
temperatures above the flashpoint.
Extinguishing Media:
Use water spray to cool fire-exposed containers. Water may be
ineffective. Use water spray, dry chemical, carbon dioxide, or
chemical foam.
**** SECTION 6 - ACCIDENTAL RELEASE MEASURES ****
General Information: Use proper personal protective equipment as indicated
in Section 8.
Spills/Leaks:
Absorb spill with inert material (e.g. vermiculite, sand or earth),
then place in suitable container. Remove all sources of ignition.
**** SECTION 7 - HANDLING and STORAGE ****
Handling:
Wash thoroughly after handling. Use with adequate ventilation.
Ground and bond containers when transferring material. Avoid contact
with eyes, skin, and clothing. Empty containers retain product
residue, (liquid and/or vapor), and can be dangerous. Keep container
tightly closed. Keep away from heat, sparks and flame. Avoid
ingestion and inhalation. Do not pressurize, cut, weld, braze,
solder, drill, grind, or expose empty containers to heat, sparks or
open flames.
Storage:
Keep away from sources of ignition. Store in a tightly closed
container. Store in a cool, dry, well-ventilated area away from
incompatible substances.
**** SECTION 8 - EXPOSURE CONTROLS, PERSONAL PROTECTION ****
Engineering Controls:
Use adequate ventilation to keep airborne concentrations low.
Exposure Limits
CAS# 542-55-2:
Personal Protective Equipment
Eyes:
Wear appropriate protective eyeglasses or chemical
safety goggles as described by OSHA's eye and face
protection regulations in 29 CFR 1910.133 or European
Standard EN166.
Skin:
Wear appropriate protective gloves to prevent skin
exposure.
Clothing:
Wear appropriate protective clothing to prevent skin
exposure.
Respirators:
Follow the OSHA respirator regulations found in 29
CFR 1910.134 or European Standard EN 149. Use a
NIOSH/MSHA or European Standard EN 149 approved
respirator if exposure limits are exceeded or if
irritation or other symptoms are experienced.
**** SECTION 9 - PHYSICAL AND CHEMICAL PROPERTIES ****
Physical State: Liquid
Color: clear light yellow
Odor: Not available.
pH: Not available.
Vapor Pressure: Not available.
Viscosity: Not available.
Boiling Point: 98.3 deg C @ 760.00mm Hg
Freezing/Melting Point: -95 deg C
Autoignition Temperature: 320 deg C ( 608.00 deg F)
Flash Point: 10 deg C ( 50.00 deg F)
Explosion Limits, lower: 1.70 vol %
Explosion Limits, upper: 8.00 vol %
Decomposition Temperature:
Solubility in water: 1%
Specific Gravity/Density: .8850g/cm3
Molecular Formula: C5H10O2
Molecular Weight: 102.13
**** SECTION 10 - STABILITY AND REACTIVITY ****
Chemical Stability:
Stable under normal temperatures and pressures.
Conditions to Avoid:
Incompatible materials, ignition sources, excess heat.
Incompatibilities with Other Materials:
Oxidizing agents - bases - acids.
Hazardous Decomposition Products:
Carbon monoxide, carbon dioxide.
Hazardous Polymerization: Has not been reported.
**** SECTION 11 - TOXICOLOGICAL INFORMATION ****
RTECS#:
CAS# 542-55-2: LQ8650000
LD50/LC50:
CAS# 542-55-2: Oral, rabbit: LD50 = 3064 mg/kg.
Carcinogenicity:
Isobutyl formate -
Not listed by ACGIH, IARC, or NTP.
Other:
See actual entry in RTECS for complete information.
**** SECTION 12 - ECOLOGICAL INFORMATION ****
**** SECTION 13 - DISPOSAL CONSIDERATIONS ****
Dispose of in a manner consistent with federal, state, and local regulations.
**** SECTION 14 - TRANSPORT INFORMATION ****
IATA
Shipping Name: ISOBUTYL FORMATE
Hazard Class: 3
UN Number: 2393
Packing Group: II
IMO
Shipping Name: ISOBUTYL FORMATE
Hazard Class: 3.2
UN Number: 2393
Packing Group: II
RID/ADR
Shipping Name: ISOBUTYL FORMATE
Hazard Class: 3
UN Number: 2393
Packing group: II
**** SECTION 15 - REGULATORY INFORMATION ****
European/International Regulations
European Labeling in Accordance with EC Directives
Hazard Symbols: F
Risk Phrases:
R 11 Highly flammable.
Safety Phrases:
S 9 Keep container in a well-ventilated place.
S 16 Keep away from sources of ignition - No
smoking.
S 33 Take precautionary measures against static
discharges.
WGK (Water Danger/Protection)
CAS# 542-55-2: 1
Canada
CAS# 542-55-2 is listed on Canada's DSL List.
CAS# 542-55-2 is not listed on Canada's Ingredient Disclosure List.
US FEDERAL
TSCA
CAS# 542-55-2 is listed on the TSCA inventory.
**** SECTION 16 - ADDITIONAL INFORMATION ****
MSDS Creation Date: 9/02/1997 Revision #2 Date: 3/18/2003
The information above is believed to be accurate and represents the best
information currently available to us. However, we make no warranty of
merchantability or any other warranty, express or implied, with respect to
such information, and we assume no liability resulting from its use. Users
should make their own investigations to determine the suitability of the
information for their particular purposes. In no way shall the company be
liable for any claims, losses, or damages of any third party or for lost
profits or any special, indirect, incidental, consequential or exemplary
damages, howsoever arising, even if the company has been advised of
the possibility of such damages.
--------------------------------------------------------------------------------
--------------------------------------------------------------------------------
|
|
|
| ALL MSDS PAGES IN THIS GROUP
| | NAME | CAS |
|
4-Benzyloxy-3-Pyrrolin-2-One, ca. 93%(TLC)
| 113896-95-0 |
|
Bromotriphenylethylene, 98%
| 1607-57-4 |
|
3,5-Dibromo-4-hydroxybenzonitrile, 98%
| 1689-84-5 |
|
Poly(cyclohexyl methacrylate), powder
| 25768-50-7 |
|
4'-Hydroxyacetophenone, 98%
| 99-93-4 |
|
2-Methylsulphonylbenzoic Acid, 95+%
| 33963-55-2 |
|
3-Nitro-2-Butanol, 99+%
| 6270-16-2 |
|
Tributyl borate, 98%
| 688-74-4 |
|
Trans-2-Nonenal, 95%
| 18829-56-6 |
|
S-Butyrylthiocholine Iodide, 98%
| 1866-16-6 |
|
3-Butyn-1-ol, 97%
| 927-74-2 |
|
4-Ethyl-2,3-Dioxo-1-Piperazinecarbonyl-chloride, tech.
| 59662-31-6 |
|
(1R)-Chrysanthemolactone, 99+%
| 14087-70-8 |
|
5-Fluoro-2-nitrotoluene, 96%
| 446-33-3 |
|
Dimethyl suberate, 99%
| 1732-09-8 |
|
1-Naphthalenethiol
| 529-36-2 |
|
4-Fluoro-2-methylanisole, 97%
| |
|
Poly(Isobutyl Methacrylate), Sec. Stand., Aver.M.W 300.000, Aver.MN
| 9011-15-8 |
|
Ethyl 4-Isocyanatobenzoate, 99+%
| 30806-83-8 |
|
trans-2-Methyl-1,3-pentadiene, 99%
| 926-54-5 |
|
Rhenium Atomic Absorption Standard Solution, 1 mg/ml Re in 1% HNO3
| 7440-15-5 |
|
2,6-Dichlorobenzamide, 97%
| 2008-58-4 |
|
bis(2-Ethylhexyl) hydrogen phosphate (techn), 95% (titr.)
| 298-07-7 |
|
1-Ethynyl-1-cyclohexanol, 99+%
| 78-27-3 |
|
Isobutyl formate, 96%
| 542-55-2 |
|
2,6-Dimethyl-gamma-pyrone, 99%
| 1004-36-0 |
|
5-Aminoisoquinoline, 99%
| 1125-60-6 |
|
Methyl-Alpha-D-Galactopyranoside Monohydrate, 99+%
| 34004-14-3 |
|
Tropine-n-oxide dihydrate, 99%
| 35772-43-1 |
|
Amberlite cg-50 - type i ion-exchange resi n
| 9042-11-9 |
|
4-Chloro-1-Methylpiperidine Hydrochloride, 97%
| 5382-23-0 |
|
3,4-Diaminobenzophenone Monohydrochloride 97%
| 57070-71-0 |
|
Calcium Chloride Hexahydrate
| 7774-34-7 |
|
2',4',6'-Trihydroxyacetophenone Monohydrate, 98%
| 480-66-0 |
|
1-(3-Tolyl)Piperazine Dihydrochloride, 97% (TLC)
| 13078-13-2 |
|
Acriflavine
| 8048-52-0 |
|
Flavanone, 98%
| 487-26-3 |
|
Methyl 4-Acetylbenzoate, 99+% (GC)
| 3609-53-8 |
|
3-Fluoro-dl-Tyrosine, 99%
| 403-90-7 |
|
2,5-Dinitrotoluene
| 619-15-8 |
|
N-(3-Chloropropyl)piperidine hydrochloride, 97%
| 5472-49-1 |
|
2-Acetoacetoxyethyl metacrylate,95+%(GC)
| 21282-97-3 |
|
6-Methyl-2,4-Heptanedione, 98% (GC)
| 3002-23-1 |
|
s-Trithiane, 97%
| 291-21-4 |
|
Trimethylamine,45 wt% aqueous solution
| 75-50-3 |
|
4-Hydroxyphenylacetic Acid, 98%
| 156-38-7 |
|
3'-(Trifluoromethyl)acetophenone, 99%
| 349-76-8 |
|
3,4,5-Trimethoxybenzonitrile, 97%
| 1885-35-4 |
|
3-Hydroxy-6-Methylpyridine, 99%
| 1121-78-4 |
|
Poly(2-acrylamido-2-methyl-1-propanesulfonic acid-co-styrene)
| 51121-85-8 |
|
|