Search   
MSDS 
:
 Trimethylamine,45 wt% aqueous solution
CAS 
:
 75-50-3
SYNONYMS 
:
 Mixture
**** SECTION 2 - COMPOSITION, INFORMATION ON INGREDIENTS ****

+----------------+--------------------------------------+----------+-----------+
| CAS# | Chemical Name | % | EINECS# |
|----------------|--------------------------------------|----------|-----------|
|----------------|--------------------------------------|----------|-----------|
| 75-50-3 |Trimethylamine | 45.0 | 200-875-0 |
|----------------|--------------------------------------|----------|-----------|
| 7732-18-5 |Water | Balance | 231-791-2 |
+----------------+--------------------------------------+----------+-----------+
Text for R-phrases: see Section 16
Hazard Symbols: F+ C
Risk Phrases: 12 20/22 34

**** SECTION 3 - HAZARDS IDENTIFICATION ****

EMERGENCY OVERVIEW
Extremely flammable. Harmful by inhalation and if swallowed. Causes
burns.

Potential Health Effects
Eye:
Contact with eyes may cause severe irritation, and possible eye
burns. Contact may cause ulceration of the conjunctiva and cornea.
Skin:
May cause severe irritation and possible burns.
Ingestion:
May cause severe gastrointestinal tract irritation with nausea,
vomiting and possible burns.
Inhalation:
May cause irritation of the mucous membranes. Inhalation may produce
coughing, nausea, and pulmonary edema.
Chronic:
No information found.

**** SECTION 4 - FIRST AID MEASURES ****

Eyes:
Flush eyes with plenty of water for at least 15 minutes,
occasionally lifting the upper and lower eyelids. Get medical aid
immediately.
Skin:
Get medical aid immediately. Flush skin with plenty of water for at
least 15 minutes while removing contaminated clothing and shoes.
Ingestion:
If victim is conscious and alert, give 2-4 cupfuls of milk or water.
Never give anything by mouth to an unconscious person. Get medical
aid immediately. Do NOT induce vomiting. If conscious and alert,
rinse mouth and drink 2-4 cupfuls of milk or water.
Inhalation:
Remove from exposure and move to fresh air immediately. If not
breathing, give artificial respiration. If breathing is difficult,
give oxygen. Get medical aid.
Notes to Physician:

**** SECTION 5 - FIRE FIGHTING MEASURES ****

General Information:
Containers can build up pressure if exposed to heat and/or fire. As
in any fire, wear a self-contained breathing apparatus in
pressure-demand, MSHA/NIOSH (approved or equivalent), and full
protective gear. Vapors can travel to a source of ignition and flash
back. Use water spray to keep fire-exposed containers cool.
Extremely flammable liquid and vapor. Vapors may be heavier than
air. They can spread along the ground and collect in low or confined
areas. Will be easily ignited by heat, sparks or flame. Vapors may
form an explosive mixture with air. Containers may explode when
heated.
Extinguishing Media:
Use water spray to cool fire-exposed containers. For large fires,
use water spray, fog or alcohol-resistant foam. For small fires, use
carbon dioxide, dry chemical, dry sand, or alcohol-resistant foam.
Cool containers with flooding quantities of water until well after
fire is out.

**** SECTION 6 - ACCIDENTAL RELEASE MEASURES ****

General Information: Use proper personal protective equipment as indicated
in Section 8.
Spills/Leaks:
Absorb spill with inert material (e.g. vermiculite, sand or earth),
then place in suitable container. Remove all sources of ignition. A
vapor suppressing foam may be used to reduce vapors. Water spray may
reduce vapor but may not prevent ignition in closed spaces.

**** SECTION 7 - HANDLING and STORAGE ****

Handling:
Wash thoroughly after handling. Use only in a well-ventilated area.
Ground and bond containers when transferring material. Avoid contact
with eyes, skin, and clothing. Empty containers retain product
residue, (liquid and/or vapor), and can be dangerous. Keep container
tightly closed. Keep away from heat, sparks and flame. Avoid
ingestion and inhalation. Do not pressurize, cut, weld, braze,
solder, drill, grind, or expose empty containers to heat, sparks or
open flames.
Storage:
Keep away from heat, sparks, and flame. Keep away from sources of
ignition. Store in a tightly closed container. Store in a cool, dry,
well-ventilated area away from incompatible substances.

**** SECTION 8 - EXPOSURE CONTROLS, PERSONAL PROTECTION ****

Engineering Controls:
Use adequate general or local exhaust ventilation to keep airborne
concentrations below the permissible exposure limits.
Exposure Limits
CAS# 75-50-3:

Belgium - TWA: 5 ppm VLE; 12 mg/m3 VLE
Belgium - STEL: 15 ppm VLE; 37 mg/m3 VLE
France - VLE: 10 ppm VLE; 25 mg/m3 VLE
Malaysia: 5 ppm TWA; 12 mg/m3 TWA
Netherlands: 0.4 ppm MAC; 1 mg/m3 MAC
Russia: 5 mg/m3 TWA
Spain: 5 ppm VLA-ED; 12 mg/m3 VLA-ED
Spain: 15 ppm VLA-EC; 37 mg/m3 VLA-EC
CAS# 7732-18-5:


Personal Protective Equipment

Eyes:
Wear appropriate protective eyeglasses or chemical
safety goggles as described by OSHA's eye and face
protection regulations in 29 CFR 1910.133 or European
Standard EN166.
Skin:
Wear appropriate protective gloves to prevent skin
exposure.
Clothing:
Wear appropriate protective clothing to prevent skin
exposure.
Respirators:
Follow the OSHA respirator regulations found in 29
CFR 1910.134 or European Standard EN 149. Use a
NIOSH/MSHA or European Standard EN 149 approved
respirator if exposure limits are exceeded or if
irritation or other symptoms are experienced.

**** SECTION 9 - PHYSICAL AND CHEMICAL PROPERTIES ****

Physical State: Liquid
Color: Not available.
Odor: fish-like - ammonia-like
pH: Not available.
Vapor Pressure: 346 mm Hg @20
Viscosity: Not available.
Boiling Point: 30 deg C @ 760.00mm Hg
Freezing/Melting Point: -2 deg C
Autoignition Temperature: 250 deg C ( 482.00 deg F)
Flash Point: -20 deg C ( -4.00 deg F)
Explosion Limits, lower: 2.00 vol %
Explosion Limits, upper: 11.60 vol %
Decomposition Temperature:
Solubility in water: xylene, ethylbenzene and chloroform
Specific Gravity/Density: .8600g/cm3
Molecular Formula: C3H9N
Molecular Weight: 59.11

**** SECTION 10 - STABILITY AND REACTIVITY ****

Chemical Stability:
Stable under normal temperatures and pressures.
Conditions to Avoid:
Incompatible materials, strong oxidants.
Incompatibilities with Other Materials:
May react with acids, oxidizing materials, chlorine, hypochlorite,
halogenated compounds, reactive organic compounds and some metals,
and mercury and nitrosating compounds. Self-reactive. Potentially
explosive reaction with bromine + heat, ethylene oxide,
triethynyl-aluminum.
Hazardous Decomposition Products:
Nitrogen oxides, carbon monoxide, carbon dioxide, hydrocarbons.
Hazardous Polymerization: Has not been reported.

**** SECTION 11 - TOXICOLOGICAL INFORMATION ****

RTECS#:
CAS# 75-50-3: PA0350000
CAS# 7732-18-5: ZC0110000
LD50/LC50:
CAS# 75-50-3: Inhalation, mouse: LC50 = 19 gm/m3; Oral, rat: LD50 =
500 mg/kg.
CAS# 7732-18-5: Oral, rat: LD50 = >90 mL/kg.
Carcinogenicity:
Trimethylamine -
Not listed by ACGIH, IARC, or NTP.
Water -
Not listed by ACGIH, IARC, or NTP.
Other:
See actual entry in RTECS for complete information.

**** SECTION 12 - ECOLOGICAL INFORMATION ****



**** SECTION 13 - DISPOSAL CONSIDERATIONS ****

Dispose of in a manner consistent with federal, state, and local regulations.

**** SECTION 14 - TRANSPORT INFORMATION ****

IATA
Shipping Name: TRIMETHYLAMINE, AQUEOUS SOLUTION
Hazard Class: 3 (8)
UN Number: 1297
Packing Group: I
IMO
Shipping Name: TRIMETHYLAMINE, AQUEOUS SOLUTION
Hazard Class: 3.1 (8)
UN Number: 1297
Packing Group: I
RID/ADR
Shipping Name: TRIMETHYLAMINE, AQUEOUS SOLUTION
Hazard Class: 3
UN Number: 1297
Packing group: II
USA RQ: CAS# 75-50-3: 100 lb final RQ; 45.4 kg final RQ

**** SECTION 15 - REGULATORY INFORMATION ****

European/International Regulations
European Labeling in Accordance with EC Directives
Hazard Symbols: F+ C
Risk Phrases:
R 12 Extremely flammable.
R 20/22 Harmful by inhalation and if swallowed.
R 34 Causes burns.
Safety Phrases:
S 3 Keep in a cool place.
S 16 Keep away from sources of ignition - No
smoking.
S 26 In case of contact with eyes, rinse immediately
with plenty of water and seek medical advice.
S 29 Do not empty into drains.
S 36/37/39 Wear suitable protective clothing, gloves
and eye/face protection.
S 45 In case of accident or if you feel unwell, seek
medical advice immediately (show the label where
possible).
WGK (Water Danger/Protection)
CAS# 75-50-3: 2
CAS# 7732-18-5: No information available.
Canada
CAS# 75-50-3 is listed on Canada's DSL List.
CAS# 7732-18-5 is listed on Canada's DSL List.
CAS# 75-50-3 is listed on Canada's Ingredient Disclosure List.
CAS# 7732-18-5 is not listed on Canada's Ingredient Disclosure List.
US FEDERAL
TSCA
CAS# 75-50-3 is listed on the TSCA inventory.
CAS# 7732-18-5 is listed on the TSCA inventory.

**** SECTION 16 - ADDITIONAL INFORMATION ****

Text for R-phrases from Section 2
R 12 Extremely flammable.
R 20/22 Harmful by inhalation and if swallowed.
R 34 Causes burns.
MSDS Creation Date: 1/02/1998 Revision #3 Date: 3/18/2003

The information above is believed to be accurate and represents the best
information currently available to us. However, we make no warranty of
merchantability or any other warranty, express or implied, with respect to
such information, and we assume no liability resulting from its use. Users
should make their own investigations to determine the suitability of the
information for their particular purposes. In no way shall the company be
liable for any claims, losses, or damages of any third party or for lost
profits or any special, indirect, incidental, consequential or exemplary
damages, howsoever arising, even if the company has been advised of
the possibility of such damages.
--------------------------------------------------------------------------------
--------------------------------------------------------------------------------
Search More   
ALL MSDS PAGES IN THIS GROUP
NAMECAS
4-Benzyloxy-3-Pyrrolin-2-One, ca. 93%(TLC) 113896-95-0
Bromotriphenylethylene, 98% 1607-57-4
3,5-Dibromo-4-hydroxybenzonitrile, 98% 1689-84-5
Poly(cyclohexyl methacrylate), powder 25768-50-7
4'-Hydroxyacetophenone, 98% 99-93-4
2-Methylsulphonylbenzoic Acid, 95+% 33963-55-2
3-Nitro-2-Butanol, 99+% 6270-16-2
Tributyl borate, 98% 688-74-4
Trans-2-Nonenal, 95% 18829-56-6
S-Butyrylthiocholine Iodide, 98% 1866-16-6
3-Butyn-1-ol, 97% 927-74-2
4-Ethyl-2,3-Dioxo-1-Piperazinecarbonyl-chloride, tech. 59662-31-6
(1R)-Chrysanthemolactone, 99+% 14087-70-8
5-Fluoro-2-nitrotoluene, 96% 446-33-3
Dimethyl suberate, 99% 1732-09-8
1-Naphthalenethiol 529-36-2
4-Fluoro-2-methylanisole, 97%
Poly(Isobutyl Methacrylate), Sec. Stand., Aver.M.W 300.000, Aver.MN 9011-15-8
Ethyl 4-Isocyanatobenzoate, 99+% 30806-83-8
trans-2-Methyl-1,3-pentadiene, 99% 926-54-5
Rhenium Atomic Absorption Standard Solution, 1 mg/ml Re in 1% HNO3 7440-15-5
2,6-Dichlorobenzamide, 97% 2008-58-4
bis(2-Ethylhexyl) hydrogen phosphate (techn), 95% (titr.) 298-07-7
1-Ethynyl-1-cyclohexanol, 99+% 78-27-3
Isobutyl formate, 96% 542-55-2
2,6-Dimethyl-gamma-pyrone, 99% 1004-36-0
5-Aminoisoquinoline, 99% 1125-60-6
Methyl-Alpha-D-Galactopyranoside Monohydrate, 99+% 34004-14-3
Tropine-n-oxide dihydrate, 99% 35772-43-1
Amberlite cg-50 - type i ion-exchange resi n 9042-11-9
4-Chloro-1-Methylpiperidine Hydrochloride, 97% 5382-23-0
3,4-Diaminobenzophenone Monohydrochloride 97% 57070-71-0
Calcium Chloride Hexahydrate 7774-34-7
2',4',6'-Trihydroxyacetophenone Monohydrate, 98% 480-66-0
1-(3-Tolyl)Piperazine Dihydrochloride, 97% (TLC) 13078-13-2
Acriflavine 8048-52-0
Flavanone, 98% 487-26-3
Methyl 4-Acetylbenzoate, 99+% (GC) 3609-53-8
3-Fluoro-dl-Tyrosine, 99% 403-90-7
2,5-Dinitrotoluene 619-15-8
N-(3-Chloropropyl)piperidine hydrochloride, 97% 5472-49-1
2-Acetoacetoxyethyl metacrylate,95+%(GC) 21282-97-3
6-Methyl-2,4-Heptanedione, 98% (GC) 3002-23-1
s-Trithiane, 97% 291-21-4
Trimethylamine,45 wt% aqueous solution 75-50-3
4-Hydroxyphenylacetic Acid, 98% 156-38-7
3'-(Trifluoromethyl)acetophenone, 99% 349-76-8
3,4,5-Trimethoxybenzonitrile, 97% 1885-35-4
3-Hydroxy-6-Methylpyridine, 99% 1121-78-4
Poly(2-acrylamido-2-methyl-1-propanesulfonic acid-co-styrene) 51121-85-8

Free MSDS Search ( Providing 250,000+ Material Properties )
Chemcas.com| Ads link:todaystock.net