Search   
MSDS 
:
 4-Ethyl-2,3-Dioxo-1-Piperazinecarbonyl-chloride, tech.
CAS 
:
 59662-31-6
SYNONYMS 
:
 None
**** SECTION 2 - COMPOSITION, INFORMATION ON INGREDIENTS ****

+----------------+--------------------------------------+----------+-----------+
| CAS# | Chemical Name | % | EINECS# |
|----------------|--------------------------------------|----------|-----------|
| 59662-31-6 |4-hexylbiphenyl | 99.0 | 261-845-0 |
+----------------+--------------------------------------+----------+-----------+
Hazard Symbols: C
Risk Phrases: 34

**** SECTION 3 - HAZARDS IDENTIFICATION ****

EMERGENCY OVERVIEW
Causes burns.Moisture sensitive.The toxicological properties of this
material have not been fully investigated.

Potential Health Effects
Eye:
Causes eye irritation and possible burns.
Skin:
Causes skin irritation and possible burns.
Ingestion:
May cause irritation of the digestive tract and possible burns.
Inhalation:
May cause severe respiratory tract irritation and possible burns.
Chronic:
No information found.

**** SECTION 4 - FIRST AID MEASURES ****

Eyes:
Immediately flush eyes with plenty of water for at least 15 minutes,
occasionally lifting the upper and lower eyelids. Get medical aid
immediately.
Skin:
Get medical aid immediately. Immediately flush skin with plenty of
water for at least 15 minutes while removing contaminated clothing
and shoes. Destroy contaminated shoes.
Ingestion:
Do not induce vomiting. If victim is conscious and alert, give 2-4
cupfuls of milk or water. Never give anything by mouth to an
unconscious person. Get medical aid immediately.
Inhalation:
Get medical aid immediately. Remove from exposure and move to fresh
air immediately. If not breathing, give artificial respiration. If
breathing is difficult, give oxygen.
Notes to Physician:

**** SECTION 5 - FIRE FIGHTING MEASURES ****

General Information:
As in any fire, wear a self-contained breathing apparatus in
pressure-demand, MSHA/NIOSH (approved or equivalent), and full
protective gear. During a fire, irritating and highly toxic gases
may be generated by thermal decomposition or combustion.
Extinguishing Media:
Use water spray, dry chemical, carbon dioxide, or alcohol-resistant
foam.

**** SECTION 6 - ACCIDENTAL RELEASE MEASURES ****

General Information: Use proper personal protective equipment as indicated
in Section 8.
Spills/Leaks:
Clean up spills immediately, observing precautions in the Protective
Equipment section. Sweep up, then place into a suitable container for
disposal. Avoid generating dusty conditions.

**** SECTION 7 - HANDLING and STORAGE ****

Handling:
Wash thoroughly after handling. Use with adequate ventilation. Avoid
contact with eyes, skin, and clothing. Avoid ingestion and
inhalation. Keep from contact with moist air and steam.
Storage:
Store in a cool, dry place. Store in a tightly closed container.
Corrosives area. Store protected from moisture.

**** SECTION 8 - EXPOSURE CONTROLS, PERSONAL PROTECTION ****

Engineering Controls:
Facilities storing or utilizing this material should be equipped
with an eyewash facility and a safety shower. Use adequate general or
local exhaust ventilation to keep airborne concentrations below the
permissible exposure limits.
Exposure Limits
CAS# 59662-31-6:


Personal Protective Equipment

Eyes:
Wear appropriate protective eyeglasses or chemical
safety goggles as described by OSHA's eye and face
protection regulations in 29 CFR 1910.133 or European
Standard EN166.
Skin:
Wear appropriate protective gloves to prevent skin
exposure.
Clothing:
Wear appropriate protective clothing to prevent skin
exposure.
Respirators:
Follow the OSHA respirator regulations found in 29
CFR 1910.134 or European Standard EN 149. Use a
NIOSH/MSHA or European Standard EN 149 approved
respirator if exposure limits are exceeded or if
irritation or other symptoms are experienced.

**** SECTION 9 - PHYSICAL AND CHEMICAL PROPERTIES ****

Physical State: Powder
Color: brown-yellow
Odor: Not available.
pH: Not available.
Vapor Pressure: Not available.
Viscosity: Not available.
Boiling Point: Not available.
Freezing/Melting Point: 100 deg C
Autoignition Temperature: > 200 deg C (> 392.00 deg F)
Flash Point: Not applicable.
Explosion Limits, lower: Not available.
Explosion Limits, upper: Not available.
Decomposition Temperature: Not available.
Solubility in water: Not available.
Specific Gravity/Density:
Molecular Formula: C7H9ClN2O3
Molecular Weight: 204.61

**** SECTION 10 - STABILITY AND REACTIVITY ****

Chemical Stability:
Stable under normal temperatures and pressures.
Conditions to Avoid:
Incompatible materials, moisture.
Incompatibilities with Other Materials:
Not available.
Hazardous Decomposition Products:
Carbon monoxide, oxides of nitrogen, irritating and toxic fumes and
gases, carbon dioxide.
Hazardous Polymerization: Has not been reported

**** SECTION 11 - TOXICOLOGICAL INFORMATION ****

RTECS#:
CAS# 59662-31-6 unlisted.
LD50/LC50:
Not available.
Carcinogenicity:
4-hexylbiphenyl -
Not listed by ACGIH, IARC, or NTP.

**** SECTION 12 - ECOLOGICAL INFORMATION ****



**** SECTION 13 - DISPOSAL CONSIDERATIONS ****

Dispose of in a manner consistent with federal, state, and local regulations.

**** SECTION 14 - TRANSPORT INFORMATION ****

IATA
Shipping Name: CORROSIVE SOLID, N.O.S.*
Hazard Class: 8
UN Number: 1759
Packing Group: III
IMO
Shipping Name: CORROSIVE SOLID, N.O.S.
Hazard Class: 8
UN Number: 1759
Packing Group: III
RID/ADR
Shipping Name: CORROSIVE SOLID, N.O.S.
Hazard Class: 8
UN Number: 1759
Packing group: III

**** SECTION 15 - REGULATORY INFORMATION ****

European/International Regulations
European Labeling in Accordance with EC Directives
Hazard Symbols: C
Risk Phrases:
R 34 Causes burns.
Safety Phrases:
S 24/25 Avoid contact with skin and eyes.
S 26 In case of contact with eyes, rinse immediately
with plenty of water and seek medical advice.
S 36/37/39 Wear suitable protective clothing, gloves
and eye/face protection.
WGK (Water Danger/Protection)
CAS# 59662-31-6: No information available.
Canada
None of the chemicals in this product are listed on the DSL/NDSL list.
CAS# 59662-31-6 is not listed on Canada's Ingredient Disclosure List.
US FEDERAL
TSCA
CAS# 59662-31-6 is not listed on the TSCA inventory.
It is for research and development use only.

**** SECTION 16 - ADDITIONAL INFORMATION ****

MSDS Creation Date: 2/12/1998 Revision #2 Date: 3/18/2003

The information above is believed to be accurate and represents the best
information currently available to us. However, we make no warranty of
merchantability or any other warranty, express or implied, with respect to
such information, and we assume no liability resulting from its use. Users
should make their own investigations to determine the suitability of the
information for their particular purposes. In no way shall the company be
liable for any claims, losses, or damages of any third party or for lost
profits or any special, indirect, incidental, consequential or exemplary
damages, howsoever arising, even if the company has been advised of
the possibility of such damages.
--------------------------------------------------------------------------------
--------------------------------------------------------------------------------
Search More   
ALL MSDS PAGES IN THIS GROUP
NAMECAS
4-Benzyloxy-3-Pyrrolin-2-One, ca. 93%(TLC) 113896-95-0
Bromotriphenylethylene, 98% 1607-57-4
3,5-Dibromo-4-hydroxybenzonitrile, 98% 1689-84-5
Poly(cyclohexyl methacrylate), powder 25768-50-7
4'-Hydroxyacetophenone, 98% 99-93-4
2-Methylsulphonylbenzoic Acid, 95+% 33963-55-2
3-Nitro-2-Butanol, 99+% 6270-16-2
Tributyl borate, 98% 688-74-4
Trans-2-Nonenal, 95% 18829-56-6
S-Butyrylthiocholine Iodide, 98% 1866-16-6
3-Butyn-1-ol, 97% 927-74-2
4-Ethyl-2,3-Dioxo-1-Piperazinecarbonyl-chloride, tech. 59662-31-6
(1R)-Chrysanthemolactone, 99+% 14087-70-8
5-Fluoro-2-nitrotoluene, 96% 446-33-3
Dimethyl suberate, 99% 1732-09-8
1-Naphthalenethiol 529-36-2
4-Fluoro-2-methylanisole, 97%
Poly(Isobutyl Methacrylate), Sec. Stand., Aver.M.W 300.000, Aver.MN 9011-15-8
Ethyl 4-Isocyanatobenzoate, 99+% 30806-83-8
trans-2-Methyl-1,3-pentadiene, 99% 926-54-5
Rhenium Atomic Absorption Standard Solution, 1 mg/ml Re in 1% HNO3 7440-15-5
2,6-Dichlorobenzamide, 97% 2008-58-4
bis(2-Ethylhexyl) hydrogen phosphate (techn), 95% (titr.) 298-07-7
1-Ethynyl-1-cyclohexanol, 99+% 78-27-3
Isobutyl formate, 96% 542-55-2
2,6-Dimethyl-gamma-pyrone, 99% 1004-36-0
5-Aminoisoquinoline, 99% 1125-60-6
Methyl-Alpha-D-Galactopyranoside Monohydrate, 99+% 34004-14-3
Tropine-n-oxide dihydrate, 99% 35772-43-1
Amberlite cg-50 - type i ion-exchange resi n 9042-11-9
4-Chloro-1-Methylpiperidine Hydrochloride, 97% 5382-23-0
3,4-Diaminobenzophenone Monohydrochloride 97% 57070-71-0
Calcium Chloride Hexahydrate 7774-34-7
2',4',6'-Trihydroxyacetophenone Monohydrate, 98% 480-66-0
1-(3-Tolyl)Piperazine Dihydrochloride, 97% (TLC) 13078-13-2
Acriflavine 8048-52-0
Flavanone, 98% 487-26-3
Methyl 4-Acetylbenzoate, 99+% (GC) 3609-53-8
3-Fluoro-dl-Tyrosine, 99% 403-90-7
2,5-Dinitrotoluene 619-15-8
N-(3-Chloropropyl)piperidine hydrochloride, 97% 5472-49-1
2-Acetoacetoxyethyl metacrylate,95+%(GC) 21282-97-3
6-Methyl-2,4-Heptanedione, 98% (GC) 3002-23-1
s-Trithiane, 97% 291-21-4
Trimethylamine,45 wt% aqueous solution 75-50-3
4-Hydroxyphenylacetic Acid, 98% 156-38-7
3'-(Trifluoromethyl)acetophenone, 99% 349-76-8
3,4,5-Trimethoxybenzonitrile, 97% 1885-35-4
3-Hydroxy-6-Methylpyridine, 99% 1121-78-4
Poly(2-acrylamido-2-methyl-1-propanesulfonic acid-co-styrene) 51121-85-8

Free MSDS Search ( Providing 250,000+ Material Properties )
Chemcas.com| Ads link:todaystock.net