**** SECTION 2 - COMPOSITION, INFORMATION ON INGREDIENTS ****
+----------------+--------------------------------------+----------+-----------+
| CAS# | Chemical Name | % | EINECS# |
|----------------|--------------------------------------|----------|-----------|
| 38460-95-6 |10-Undecenoyl chloride | 98 | 253-951-0 |
+----------------+--------------------------------------+----------+-----------+
Hazard Symbols: C
Risk Phrases: 34
**** SECTION 3 - HAZARDS IDENTIFICATION ****
EMERGENCY OVERVIEW
Causes burns.Moisture sensitive.Corrosive.Lachrymator (substance
which increases the flow of tears).
Potential Health Effects
Eye:
Causes eye burns. Lachrymator (substance which increases the flow
of tears). May cause chemical conjunctivitis and corneal damage.
Skin:
Causes skin burns. May cause cyanosis of the extremities. May cause
skin rash (in milder cases), and cold and clammy skin with cyanosis
or pale color.
Ingestion:
May cause severe and permanent damage to the digestive tract. Causes
gastrointestinal tract burns. May cause perforation of the digestive
tract. May cause systemic effects.
Inhalation:
Causes chemical burns to the respiratory tract. Inhalation may be
fatal as a result of spasm, inflammation, edema of the larynx and
bronchi, chemical pneumonitis and pulmonary edema. Aspiration may
lead to pulmonary edema. May cause systemic effects. May cause
burning sensation, coughing, wheezing, laryngitis, shortness of
breath, headache, nausea, and vomiting. Inhalation at high
concentrations may cause CNS depression and asphixiation.
Chronic:
Effects may be delayed.
**** SECTION 4 - FIRST AID MEASURES ****
Eyes:
Get medical aid immediately. Do NOT allow victim to rub eyes or keep
eyes closed. Extensive irrigation with water is required (at least 30
minutes).
Skin:
Get medical aid immediately. Immediately flush skin with plenty of
water for at least 15 minutes while removing contaminated clothing
and shoes. Wash clothing before reuse. Destroy contaminated shoes.
Ingestion:
Do not induce vomiting. If victim is conscious and alert, give 2-4
cupfuls of milk or water. Never give anything by mouth to an
unconscious person. Get medical aid immediately.
Inhalation:
Get medical aid immediately. Remove from exposure and move to fresh
air immediately. If breathing is difficult, give oxygen. Do NOT use
mouth-to-mouth resuscitation. If breathing has ceased apply
artificial respiration using oxygen and a suitable mechanical device
such as a bag and a mask.
Notes to Physician:
**** SECTION 5 - FIRE FIGHTING MEASURES ****
General Information:
As in any fire, wear a self-contained breathing apparatus in
pressure-demand, MSHA/NIOSH (approved or equivalent), and full
protective gear. During a fire, irritating and highly toxic gases
may be generated by thermal decomposition or combustion. Use water
spray to keep fire-exposed containers cool. Water may be ineffective.
Material is lighter than water and a fire may be spread by the use of
water. Combustible liquid. Vapors may be heavier than air. They can
spread along the ground and collect in low or confined areas.
Containers may explode when heated. Water hydrolyzes material
liberating acidic gas which in contact with metal surfaces can
generate flammable and/or explosive hydrogen gas.
Extinguishing Media:
Do NOT use water directly on fire. In case of fire, use water, dry
chemical, chemical foam, or alcohol-resistant foam. Use water spray
to cool fire-exposed containers. Use foam, dry chemical, or carbon
dioxide. Do NOT get water inside containers.
**** SECTION 6 - ACCIDENTAL RELEASE MEASURES ****
General Information: Use proper personal protective equipment as indicated
in Section 8.
Spills/Leaks:
Absorb spill with inert material (e.g. vermiculite, sand or earth),
then place in suitable container. Clean up spills immediately,
observing precautions in the Protective Equipment section. Remove all
sources of ignition. Use a spark-proof tool. Provide ventilation. Do
not get water inside containers.
**** SECTION 7 - HANDLING and STORAGE ****
Handling:
Wash thoroughly after handling. Use only in a well-ventilated area.
Do not breathe dust, vapor, mist, or gas. Do not get in eyes, on
skin, or on clothing. Empty containers retain product residue,
(liquid and/or vapor), and can be dangerous. Keep container tightly
closed. Keep away from heat, sparks and flame. Do not ingest or
inhale. Do not allow contact with water. Use only in a chemical fume
hood. Discard contaminated shoes. Do not pressurize, cut, weld,
braze, solder, drill, grind, or expose empty containers to heat,
sparks or open flames. Keep from contact with moist air and steam.
Storage:
Keep away from heat, sparks, and flame. Keep away from sources of
ignition. Keep container closed when not in use. Store in a tightly
closed container. Store in a cool, dry, well-ventilated area away
from incompatible substances. Corrosives area. Store protected from
moisture.
**** SECTION 8 - EXPOSURE CONTROLS, PERSONAL PROTECTION ****
Engineering Controls:
Facilities storing or utilizing this material should be equipped
with an eyewash facility and a safety shower. Use adequate general or
local explosion-proof ventilation to keep airborne levels to
acceptable levels.
Exposure Limits
CAS# 38460-95-6:
Personal Protective Equipment
Eyes:
Wear appropriate protective eyeglasses or chemical
safety goggles as described by OSHA's eye and face
protection regulations in 29 CFR 1910.133 or European
Standard EN166.
Skin:
Wear appropriate protective gloves to prevent skin
exposure.
Clothing:
Wear appropriate protective clothing to prevent skin
exposure.
Respirators:
A respiratory protection program that meets OSHA's 29
CFR 1910.134 and ANSI Z88.2 requirements or European
Standard EN 149 must be followed whenever workplace
conditions warrant respirator use.
**** SECTION 9 - PHYSICAL AND CHEMICAL PROPERTIES ****
Physical State: Liquid
Color: clear yellow
Odor: None reported.
pH: Not available.
Vapor Pressure: Not available.
Viscosity: Not available.
Boiling Point: 120 - 122 deg C @10 mmHg
Freezing/Melting Point: Not available.
Autoignition Temperature: Not applicable.
Flash Point: 93 deg C ( 199.40 deg F)
Explosion Limits, lower: Not available.
Explosion Limits, upper: Not available.
Decomposition Temperature: Not available.
Solubility in water: Not available.
Specific Gravity/Density: 0.9440 g/cm3
Molecular Formula: C11H19ClO
Molecular Weight: 202.72
**** SECTION 10 - STABILITY AND REACTIVITY ****
Chemical Stability:
Stable under normal temperatures and pressures. Moisture sensitive.
Conditions to Avoid:
Incompatible materials, ignition sources, moisture, excess heat.
Incompatibilities with Other Materials:
Oxidizing agents, strong bases, alcohols, moisture, water.
Hazardous Decomposition Products:
Hydrogen chloride, phosgene, carbon monoxide, irritating and toxic
fumes and gases, carbon dioxide, chloride fumes.
Hazardous Polymerization: Has not been reported.
**** SECTION 11 - TOXICOLOGICAL INFORMATION ****
RTECS#:
CAS# 38460-95-6: YQ2991000
LD50/LC50:
Not available.
Carcinogenicity:
10-Undecenoyl chloride -
Not listed by ACGIH, IARC, or NTP.
Other:
See actual entry in RTECS for complete information.
**** SECTION 12 - ECOLOGICAL INFORMATION ****
**** SECTION 13 - DISPOSAL CONSIDERATIONS ****
Dispose of in a manner consistent with federal, state, and local regulations.
**** SECTION 14 - TRANSPORT INFORMATION ****
IATA
Shipping Name: CORROSIVE LIQUID, N.O.S.*
Hazard Class: 8
UN Number: 1760
Packing Group: II
IMO
Shipping Name: CORROSIVE LIQUID, N.O.S.
Hazard Class: 8
UN Number: 1760
Packing Group: II
RID/ADR
Shipping Name: CORROSIVE LIQUID, N.O.S.
Hazard Class: 8
UN Number: 1760
Packing group: II
**** SECTION 15 - REGULATORY INFORMATION ****
European/International Regulations
European Labeling in Accordance with EC Directives
Hazard Symbols: C
Risk Phrases:
R 34 Causes burns.
Safety Phrases:
S 26 In case of contact with eyes, rinse immediately
with plenty of water and seek medical advice.
WGK (Water Danger/Protection)
CAS# 38460-95-6: No information available.
Canada
CAS# 38460-95-6 is listed on Canada's DSL List.
CAS# 38460-95-6 is not listed on Canada's Ingredient Disclosure List.
US FEDERAL
TSCA
CAS# 38460-95-6 is listed on the TSCA inventory.
**** SECTION 16 - ADDITIONAL INFORMATION ****
MSDS Creation Date: 7/15/1999 Revision #6 Date: 3/18/2003
The information above is believed to be accurate and represents the best
information currently available to us. However, we make no warranty of
merchantability or any other warranty, express or implied, with respect to
such information, and we assume no liability resulting from its use. Users
should make their own investigations to determine the suitability of the
information for their particular purposes. In no way shall the company be
liable for any claims, losses, or damages of any third party or for lost
profits or any special, indirect, incidental, consequential or exemplary
damages, howsoever arising, even if the company has been advised of
the possibility of such damages.
--------------------------------------------------------------------------------
--------------------------------------------------------------------------------
|
|
|
| ALL MSDS PAGES IN THIS GROUP
| | NAME | CAS |
|
Poly(diallyl phthalate), average m.w. 65000 (gpc)
| 25053-15-0 |
|
Suberoyl chloride, 97%
| 10027-07-3 |
|
4,4'-Di-Tert.-Butylbiphenyl, 99+%
| 1625-91-8 |
|
1,1,2,2,-Tetrachloroethane, 99% (gc)
| 79-34-5 |
|
4-Nitroimidazole, 98%
| 3034-38-6 |
|
Isobutyl cyanoacetate, 99+%
| 13361-31-4 |
|
1,1,2,2-Tetrachloroethane-d2, 99 atom % d
| 33685-54-0 |
|
p-Phenylenediamine, 99% (uv-vis)
| 106-50-3 |
|
3-Fluoro-2-methylaniline, 97%
| 443-86-7 |
|
Propionitrile, 99%
| 107-12-0 |
|
Manganese(II) carbonate hydrate, 90%
| 598-62-9 |
|
1-Methoxy-1,4-cyclohexadiene, tech., 75%
| 2886-59-1 |
|
Hemin, 99% (uv-vis)
| 16009-13-5 |
|
L-Asparagine, Monohydrate, 99% (Titr.)
| 5794-13-8 |
|
2,6-Dimethylphenol, 99%
| 576-26-1 |
|
Isopropyl(S)-(-)-lactate, 99%
| 63697-00-7 |
|
Vinyltoluene, stabilized with 10 to 15 ppm p-tert-Butylcatechol
| 25013-15-4 |
|
1-Benzylpiperazine, 97+%
| 2759-28-6 |
|
4-Phenylazobenzoyl Chloride
| 104-24-5 |
|
Ethyl Indole-2-Carboxylate, 97%
| 3770-50-1 |
|
2-Chloro-6-Methylbenzonitrile, 97%
| 6575-09-3 |
|
DL-3-Hydroxy-4-Methoxymandelic Acid, 99%
| 3695-24-7 |
|
2,4-Difluorobenzoyl chloride
| 72482-64-5 |
|
2-Methylcyclohexylamine, 98%, mixture of cis and trans
| 7003-32-9 |
|
Manganese Phthalocyanine
| 14325-24-7 |
|
Diethyl Sulfate, 95% (GC)
| 64-67-5 |
|
L-(-)-Perillic Acid, 95%
| 7694-45-3 |
|
m-Phenylenediamine, 99+%
| 108-45-2 |
|
Trimethyl Orthoformate, 99%
| 149-73-5 |
|
5-Methyl-2-nitrophenol, 97%
| 700-38-9 |
|
N-(4-nitrobenzoyl)-l-glutamic acid diethyl ester, 98%
| |
|
5,5-Diphenyl-2-Thiohydantoin, 99%
| 21083-47-6 |
|
Propionic acid-d6, 98.5+ atom% d
| 19448-61-4 |
|
2-Amino-6-methylmercaptopurine
| 1198-47-6 |
|
Manganese(II) bromide, anhydrous, 99%
| 13446-03-2 |
|
2-Methylthiophene, 98%
| 554-14-3 |
|
Cyclohexyl Mercaptan, 99+%
| 1569-69-3 |
|
Trans-4-Octyl-Alpha-Chloro-4'- Ethoxystilbene, 99+%
| 33468-15-4 |
|
2,5-Dihydroxybenzaldehyde, 99%
| 1194-98-5 |
|
Cyclopentyl Bromide, 98%
| 137-43-9 |
|
3,5-Diiodosalicylic Acid, 99% (Titr.)
| 133-91-5 |
|
Tris-(3-(Trifluoromethylhydroxymethylene)- D-Camphorato), YB(III)
| 38054-03-4 |
|
4-Chloro-O-Tolylhydrazine Hydrochloride
| 19690-59-6 |
|
Methyltriethoxysilane, 98+%
| 2031-67-6 |
|
Thorin I, Indicator Grade
| 132-33-2 |
|
2-Amino-6-Chlorobenzothiazole, 99%
| 95-24-9 |
|
10-Undecenoyl chloride, 98%
| 38460-95-6 |
|
D(-)-p-Hydroxyphenylglycine, 98+%
| 22818-40-2 |
|
Methyl 2-Isothiocyanatobenzoate, 98%
| 16024-82-1 |
|
Ethyl 2-oxocyclopentanecarboxylate, tech., 90%
| 611-10-9 |
|
|