**** SECTION 2 - COMPOSITION, INFORMATION ON INGREDIENTS ****
+----------------+--------------------------------------+----------+-----------+
| CAS# | Chemical Name | % | EINECS# |
|----------------|--------------------------------------|----------|-----------|
| 39687-95-1 |Methyl isocyanoacetate, technical, 95+| 95+% | 254-593-8 |
| |% | | |
+----------------+--------------------------------------+----------+-----------+
Hazard Symbols: C
Risk Phrases: 22 34
**** SECTION 3 - HAZARDS IDENTIFICATION ****
EMERGENCY OVERVIEW
Harmful if swallowed. Causes burns.Corrosive.Moisture
sensitive.Light sensitive.
Potential Health Effects
Eye:
Causes eye burns.
Skin:
Causes skin burns.
Ingestion:
Causes gastrointestinal tract burns. May cause perforation of the
digestive tract.
Inhalation:
May cause irritation of the respiratory tract with burning pain in
the nose and throat, coughing, wheezing, shortness of breath and
pulmonary edema. Causes chemical burns to the respiratory tract. May
cause abdominal pain, nausea, vomiting, and inflammation of the gums
and mouth.
Chronic:
No information found.
**** SECTION 4 - FIRST AID MEASURES ****
Eyes:
Immediately flush eyes with plenty of water for at least 15 minutes,
occasionally lifting the upper and lower eyelids. Get medical aid
immediately.
Skin:
Get medical aid immediately. Immediately flush skin with plenty of
water for at least 15 minutes while removing contaminated clothing
and shoes.
Ingestion:
Do not induce vomiting. If victim is conscious and alert, give 2-4
cupfuls of milk or water. Get medical aid immediately.
Inhalation:
Get medical aid immediately. Remove from exposure and move to fresh
air immediately. If not breathing, give artificial respiration. If
breathing is difficult, give oxygen.
Notes to Physician:
**** SECTION 5 - FIRE FIGHTING MEASURES ****
General Information:
As in any fire, wear a self-contained breathing apparatus in
pressure-demand, MSHA/NIOSH (approved or equivalent), and full
protective gear.
Extinguishing Media:
Use water spray, dry chemical, or carbon dioxide.
**** SECTION 6 - ACCIDENTAL RELEASE MEASURES ****
General Information: Use proper personal protective equipment as indicated
in Section 8.
Spills/Leaks:
Vacuum or sweep up material and place into a suitable disposal
container.
**** SECTION 7 - HANDLING and STORAGE ****
Handling:
Wash thoroughly after handling. Remove contaminated clothing and
wash before reuse. Use only in a well-ventilated area. Do not get on
skin and clothing. Do not ingest or inhale. Use only in a chemical
fume hood.
Storage:
Keep away from sources of ignition. Do not store in direct sunlight.
Store in a tightly closed container. Store in a dry area. Keep
refrigerated. (Store below 4C/39F.) Do not store in aluminum
containers.
**** SECTION 8 - EXPOSURE CONTROLS, PERSONAL PROTECTION ****
Engineering Controls:
Facilities storing or utilizing this material should be equipped
with an eyewash facility and a safety shower. Use process enclosure,
local exhaust ventilation, or other engineering controls to control
airborne levels.
Exposure Limits
CAS# 39687-95-1:
Personal Protective Equipment
Eyes:
Wear chemical goggles and a face shield if splashing
is possible. Wear appropriate protective eyeglasses
or chemical safety goggles as described by OSHA's eye
and face protection regulations in 29 CFR 1910.133 or
European Standard EN166.
Skin:
Wear appropriate protective gloves to prevent skin
exposure.
Clothing:
Wear appropriate protective clothing to prevent skin
exposure.
Respirators:
Follow the OSHA respirator regulations found in 29
CFR 1910.134 or European Standard EN 149. Use a
NIOSH/MSHA or European Standard EN 149 approved
respirator if exposure limits are exceeded or if
irritation or other symptoms are experienced.
**** SECTION 9 - PHYSICAL AND CHEMICAL PROPERTIES ****
Physical State: Liquid
Color: clear slight brown
Odor: Unpleasant odor
pH: Not available.
Vapor Pressure: Not available.
Viscosity: Not available.
Boiling Point: 75 - 76 deg C @ 10.00mm Hg
Freezing/Melting Point: Not available.
Autoignition Temperature: Not available.
Flash Point: 84 deg C ( 183.20 deg F)
Explosion Limits, lower: Not available.
Explosion Limits, upper: Not available.
Decomposition Temperature:
Solubility in water:
Specific Gravity/Density: 1.0900g/cm3
Molecular Formula: C4H5NO2
Molecular Weight: 99.09
**** SECTION 10 - STABILITY AND REACTIVITY ****
Chemical Stability:
Stable under normal temperatures and pressures.
Conditions to Avoid:
Light, moisture.
Incompatibilities with Other Materials:
Strong oxidizing agents, strong bases, strong acids, hydrated
iron(II) sulfate, explosive on contact with traces of heavy metals.
Hazardous Decomposition Products:
Nitrogen oxides, carbon monoxide, carbon dioxide.
Hazardous Polymerization: Has not been reported.
**** SECTION 11 - TOXICOLOGICAL INFORMATION ****
RTECS#:
CAS# 39687-95-1 unlisted.
LD50/LC50:
Not available.
Carcinogenicity:
Methyl isocyanoacetate, technical, 95+% -
Not listed by ACGIH, IARC, or NTP.
**** SECTION 12 - ECOLOGICAL INFORMATION ****
**** SECTION 13 - DISPOSAL CONSIDERATIONS ****
Dispose of in a manner consistent with federal, state, and local regulations.
**** SECTION 14 - TRANSPORT INFORMATION ****
IATA
Shipping Name: CORROSIVE LIQUID, N.O.S.*
Hazard Class: 8
UN Number: 1760
Packing Group: III
IMO
Shipping Name: CORROSIVE LIQUID, N.O.S.
Hazard Class: 8
UN Number: 1760
Packing Group: III
RID/ADR
Shipping Name: CORROSIVE LIQUID, N.O.S.
Hazard Class: 8
UN Number: 1760
Packing group: III
**** SECTION 15 - REGULATORY INFORMATION ****
European/International Regulations
European Labeling in Accordance with EC Directives
Hazard Symbols: C
Risk Phrases:
R 22 Harmful if swallowed.
R 34 Causes burns.
Safety Phrases:
S 25 Avoid contact with eyes.
S 36/37/39 Wear suitable protective clothing, gloves
and eye/face protection.
S 45 In case of accident or if you feel unwell, seek
medical advice immediately (show the label where
possible).
WGK (Water Danger/Protection)
CAS# 39687-95-1: No information available.
Canada
None of the chemicals in this product are listed on the DSL/NDSL list.
CAS# 39687-95-1 is not listed on Canada's Ingredient Disclosure List.
US FEDERAL
TSCA
CAS# 39687-95-1 is not listed on the TSCA inventory.
It is for research and development use only.
**** SECTION 16 - ADDITIONAL INFORMATION ****
MSDS Creation Date: 9/02/1997 Revision #2 Date: 3/18/2003
The information above is believed to be accurate and represents the best
information currently available to us. However, we make no warranty of
merchantability or any other warranty, express or implied, with respect to
such information, and we assume no liability resulting from its use. Users
should make their own investigations to determine the suitability of the
information for their particular purposes. In no way shall the company be
liable for any claims, losses, or damages of any third party or for lost
profits or any special, indirect, incidental, consequential or exemplary
damages, howsoever arising, even if the company has been advised of
the possibility of such damages.
--------------------------------------------------------------------------------
--------------------------------------------------------------------------------
|
|
|
| ALL MSDS PAGES IN THIS GROUP
| | NAME | CAS |
|
Methyl isocyanoacetate, tech., 95+%
| 39687-95-1 |
|
2-Methyl-2-thiopseudourea sulfate, 98%
| 867-44-7 |
|
2-Octanol
| 123-96-6 |
|
Methanesulfonyl Chloride, 99.5% (gc)
| 124-63-0 |
|
1-Acetyl-4-(4-hydroxyphenyl)piperazine, 98%
| 67914-60-7 |
|
2-(2-Hydroxyethylamino)-2-(hydroxymethyl)- 1,3-propanediol, 99%
| 7343-51-3 |
|
Salicylsalicylic Acid, 99%(Titr.;Dry Substance)
| 552-94-3 |
|
N-Phenylethylenediamine, 99%
| 1664-40-0 |
|
Phenyltrimethylammonium hydroxide, 0.1M in methanol
| 67-56-1 |
|
9-Hydroxy-4-methoxyacridine, 96%
| 35308-00-0 |
|
2-Amino-1,5-Naphthalenedisulfonic Acid, Tech.
| 117-62-4 |
|
trans-2-Amino-1-cyclohexanecarboxylic acid , 98%
| 5691-19-0 |
|
Trans-2,3,4-Trimethoxycinnamic Acid 99%
| 33130-03-9 |
|
2-Phenylbenzimidazole-5-sulfonic acid, 98%
| 27503-81-7 |
|
1,2,5,6-Diepoxycyclooctane, 96%
| 27035-39-8 |
|
2-Amino-5-Nitrobenzotrifluoride, 98%
| 121-01-7 |
|
Sebacic Acid (Pract), 90% (GC)
| 111-20-6 |
|
Desoxyanisoin, 98%
| 120-44-5 |
|
1-Chloroheptane, 97%
| 629-06-1 |
|
3-Bromofuran, 98%
| 22037-28-1 |
|
2-Bromoethyl Methyl Ether, 95%
| 6482-24-2 |
|
N-Benzyloxycarbonyloxy-Succinimide, 98%
| 13139-17-8 |
|
2-(2-Aminoethylamino)ethanol, 99+%
| 111-41-1 |
|
5-Fluoro-2-Nitrophenol 99 %
| 446-36-6 |
|
Lithium Hydride, 98%
| 7580-67-8 |
|
2-Acetyl-1-naphthol 99%
| 711-79-5 |
|
2,5-Dimethoxytoluene, 99%
| 24599-58-4 |
|
Ergosterol, 98%
| 57-87-4 |
|
Fluorescein, laser grade, 99% (uv-vis)
| 2321-07-5 |
|
Isooctane
| 540-84-1 |
|
5-Nitro-3-indazolinone, 97+%
| 61346-19-8 |
|
Methyl 4-Trifluoromethylbenzoylacetate
| |
|
Succinic Anhydride, 99+%
| 108-30-5 |
|
4'-Ethoxyacetophenone
| 1676-63-7 |
|
2-(p-tolyl)-ethylamine, 97%
| 3261-62-9 |
|
Fusaric acid, 99%
| 536-69-6 |
|
1-(4-Methylphenyl)-1-cyclohexanecarboxylic acid 97%
| 84682-27-9 |
|
Lithium borohydride, 95%
| 16949-15-8 |
|
2-Amino-3-Methylnaphtho(1,2)Imidazole, 99%
| 35199-58-7 |
|
Mechlorethamine hydrochloride, 98%
| 55-86-7 |
|
2,4,5-Trichlorobenzenesulfonyl Hydrazide, 98%
| 6655-72-7 |
|
2',3',4'-Trichloroacetophenone, 95%
| 13608-87-2 |
|
Pyrogallol red
| 32638-88-3 |
|
3-Nitrobiphenyl, 97%
| 2113-58-8 |
|
2,3-Dihydroxynaphthalene, 98%
| 92-44-4 |
|
2,5-Dibromothiophene, 95%
| 3141-27-3 |
|
Hexakis(diethoxyphosphoryl)calix[6]arene, 97%
| |
|
Dl-3-methyl-2-butanol, 98%
| 598-75-4 |
|
Indan, 95%
| 496-11-7 |
|
Tetraphenyllead, 97%
| 595-89-1 |
|
|