Search   
MSDS 
:
 4-Fluoro-2-methylphenol, 98%
CAS 
:
 452-72-2
SYNONYMS 
:
 None.
**** SECTION 2 - COMPOSITION, INFORMATION ON INGREDIENTS ****

+----------------+--------------------------------------+----------+-----------+
| CAS# | Chemical Name | % | EINECS# |
|----------------|--------------------------------------|----------|-----------|
| 452-72-2 |4-Fluoro-2-methylphenol | 98 | unlisted |
+----------------+--------------------------------------+----------+-----------+
Hazard Symbols: XN
Risk Phrases: 21/22 36/37/38

**** SECTION 3 - HAZARDS IDENTIFICATION ****

EMERGENCY OVERVIEW
Harmful in contact with skin and if swallowed. Irritating to eyes,
respiratory system and skin.

Potential Health Effects
Eye:
Causes eye irritation. May cause chemical conjunctivitis.
Skin:
Causes skin irritation. Harmful if absorbed through the skin.
Ingestion:
Harmful if swallowed. May cause gastrointestinal irritation with
nausea, vomiting and diarrhea.
Inhalation:
Causes respiratory tract irritation. May be harmful if inhaled.
Chronic:
No information found.

**** SECTION 4 - FIRST AID MEASURES ****

Eyes:
Immediately flush eyes with plenty of water for at least 15 minutes,
occasionally lifting the upper and lower eyelids. Get medical aid.
Skin:
Get medical aid. Flush skin with plenty of water for at least 15
minutes while removing contaminated clothing and shoes. Wash clothing
before reuse.
Ingestion:
Never give anything by mouth to an unconscious person. Get medical
aid. Do NOT induce vomiting. If conscious and alert, rinse mouth and
drink 2-4 cupfuls of milk or water.
Inhalation:
Remove from exposure and move to fresh air immediately. If not
breathing, give artificial respiration. If breathing is difficult,
give oxygen. Get medical aid.
Notes to Physician:
Treat symptomatically and supportively.

**** SECTION 5 - FIRE FIGHTING MEASURES ****

General Information:
As in any fire, wear a self-contained breathing apparatus in
pressure-demand, MSHA/NIOSH (approved or equivalent), and full
protective gear. During a fire, irritating and highly toxic gases
may be generated by thermal decomposition or combustion. Dusts may
be combustible when exposed to heat, flame, or oxidizing agents.
Extinguishing Media:
Use water spray, dry chemical, carbon dioxide, or appropriate foam.

**** SECTION 6 - ACCIDENTAL RELEASE MEASURES ****

General Information: Use proper personal protective equipment as indicated
in Section 8.
Spills/Leaks:
Clean up spills immediately, observing precautions in the Protective
Equipment section. Sweep up, then place into a suitable container for
disposal. Avoid generating dusty conditions. Provide ventilation.

**** SECTION 7 - HANDLING and STORAGE ****

Handling:
Wash thoroughly after handling. Remove contaminated clothing and
wash before reuse. Minimize dust generation and accumulation. Avoid
contact with eyes, skin, and clothing. Avoid ingestion and
inhalation. Use with adequate ventilation.
Storage:
Store in a tightly closed container. Store in a cool, dry,
well-ventilated area away from incompatible substances.

**** SECTION 8 - EXPOSURE CONTROLS, PERSONAL PROTECTION ****

Engineering Controls:
Facilities storing or utilizing this material should be equipped
with an eyewash facility and a safety shower. Use adequate
ventilation to keep airborne concentrations low.
Exposure Limits
CAS# 452-72-2:


Personal Protective Equipment

Eyes:
Wear appropriate protective eyeglasses or chemical
safety goggles as described by OSHA's eye and face
protection regulations in 29 CFR 1910.133 or European
Standard EN166.
Skin:
Wear appropriate protective gloves to prevent skin
exposure.
Clothing:
Wear appropriate protective clothing to prevent skin
exposure.
Respirators:
A respiratory protection program that meets OSHA's 29
CFR 1910.134 and ANSI Z88.2 requirements or European
Standard EN 149 must be followed whenever workplace
conditions warrant respirator use.

**** SECTION 9 - PHYSICAL AND CHEMICAL PROPERTIES ****

Physical State: Crystals
Color: off-white to brown
Odor: none reported
pH: Not available.
Vapor Pressure: Not available.
Viscosity: Not available.
Boiling Point: 87 deg C @ 14mmHg
Freezing/Melting Point: 37-38 deg C
Autoignition Temperature: Not applicable.
Flash Point: 85 deg C ( 185.00 deg F)
Explosion Limits, lower: Not available.
Explosion Limits, upper: Not available.
Decomposition Temperature: Not available.
Solubility in water: Not available.
Specific Gravity/Density: Not available.
Molecular Formula: C7H7FO
Molecular Weight: 126.13

**** SECTION 10 - STABILITY AND REACTIVITY ****

Chemical Stability:
Stable at room temperature in closed containers under normal storage
and handling conditions.
Conditions to Avoid:
Dust generation, excess heat.
Incompatibilities with Other Materials:
Strong oxidizing agents.
Hazardous Decomposition Products:
Carbon monoxide, carbon dioxide, hydrogen fluoride gas.
Hazardous Polymerization: Has not been reported

**** SECTION 11 - TOXICOLOGICAL INFORMATION ****

RTECS#:
CAS# 452-72-2 unlisted.
LD50/LC50:
Not available.
Carcinogenicity:
4-Fluoro-2-methylphenol -
Not listed by ACGIH, IARC, or NTP.

**** SECTION 12 - ECOLOGICAL INFORMATION ****



**** SECTION 13 - DISPOSAL CONSIDERATIONS ****

Dispose of in a manner consistent with federal, state, and local regulations.

**** SECTION 14 - TRANSPORT INFORMATION ****

IATA
Shipping Name: Not regulated.
Hazard Class:
UN Number:
Packing Group:
IMO
Shipping Name: Not regulated.
Hazard Class:
UN Number:
Packing Group:
RID/ADR
Shipping Name: Not regulated.
Hazard Class:
UN Number:
Packing group:

**** SECTION 15 - REGULATORY INFORMATION ****

European/International Regulations
European Labeling in Accordance with EC Directives
Hazard Symbols: XN
Risk Phrases:
R 21/22 Harmful in contact with skin and if
swallowed.
R 36/37/38 Irritating to eyes, respiratory system
and skin.
Safety Phrases:
S 26 In case of contact with eyes, rinse immediately
with plenty of water and seek medical advice.
S 36/37/39 Wear suitable protective clothing, gloves
and eye/face protection.
WGK (Water Danger/Protection)
CAS# 452-72-2: No information available.
Canada
None of the chemicals in this product are listed on the DSL/NDSL list.
CAS# 452-72-2 is not listed on Canada's Ingredient Disclosure List.
US FEDERAL
TSCA
CAS# 452-72-2 is not listed on the TSCA inventory.
It is for research and development use only.

**** SECTION 16 - ADDITIONAL INFORMATION ****

MSDS Creation Date: 9/02/1997 Revision #5 Date: 11/05/2004

The information above is believed to be accurate and represents the best
information currently available to us. However, we make no warranty of
merchantability or any other warranty, express or implied, with respect to
such information, and we assume no liability resulting from its use. Users
should make their own investigations to determine the suitability of the
information for their particular purposes. In no way shall the company be
liable for any claims, losses, or damages of any third party or for lost
profits or any special, indirect, incidental, consequential or exemplary
damages, howsoever arising, even if the company has been advised of
the possibility of such damages.
--------------------------------------------------------------------------------
--------------------------------------------------------------------------------
Search More   
ALL MSDS PAGES IN THIS GROUP
NAMECAS
4-Fluoro-2-methylphenol, 98% 452-72-2
1,2-Dimethyl-6,7-dimethoxy-1,2,3,4-tetrahydroisoquinoline 5852-92-6
D-(+)-Maltose monohydrate, 92-93% 69-79-4
6,7-Dihydroxy-1-methyl-1,2,3,4-tetrahydroisoquinoline hydrobromide, 38221-21-5
Manganese (II) Chloride Tetrahydrate, P.A. 13446-34-9
6-Azabicyclo[3.2.0]Heptan-7-one, 98% 22031-52-3
Manganese(IV) Oxide, Precipitated Active, 88% (Titr.) 1313-13-9
7-Azabicyclo[4.2.0]heptan-8-one, 98% 34102-49-3
Manganese (II) Sulfate Monohydrate, Reagent ACS 10034-96-5
3-Amino-4,4-Dimethylpentanoic Acid, 98% 0-01-1
3-Amino-4-Ethylhexanoic Acid, 98% 0-01-1
D(+)-Mannitol, P.A. 69-65-8
Stoddard Solvent 8052-41-3
3-Amino-5-methylhexanoic acid, 98% 3653-34-7
Dl-citrulline, 97% 627-77-0
2-Mercaptoethanol, 99% 60-24-2
Aluminum Hydroxide, Powder 21645-51-2
N,N'-bis(p-butoxybenzylidene)-alpha, alpha'-bi-p-toluidine 59261-10-8
Mercuric acetate, p.a. 1600-27-7
Mercury (II) Bromide, P.A. 7789-47-1
Hexaethylbenzene 604-88-6
3-Amino-5-phenylpentanoic acid, 98% 91247-38-0
Ethyl-cis-2-isothiocyanato-1-cyclopentanecarboxylate, 97% 311341-94-3
Aluminum nitrate nonahydrate 7784-27-2
Mercury(II) chloride, reagent ACS, crystals 7487-94-7
Molybdenum, powder, 99.99%, - 200 mesh 7439-98-7
Ethyl-cis-2-Isothiocyanato-1-Cyclohexanecarboxylate, 97% 0-01-1
Boc-L-Alanine, 99+% 15761-38-3
Poly(caprolactone) Triol, Average M.W.300 39280-09-6
Mercury (II) Iodide, Red, P.A. 7774-29-0
Mercury (II) Nitrate Monohydrate, Reagent ACS 7783-34-8
Alumina (Activated/Adsorption/Dry Powder/Acid/Basic/Neutral/Polishing 1344-28-1
N-Isopropyl-1-Piperazineacetamide, 95+% 39890-42-1
2,5-Diethoxyaniline, 96% 94-85-9
Mercury (II) Oxide, Yellow, P.A. 21908-53-2
Mercury (II) Sulfate, Reagent ACS (Powder) 7783-35-9
Mercury Chloride, P.A 10112-91-1
Chloroacetyl chloride, 98% 79-04-9
2,2-Bis(hydroxymethyl)propionic acid, 99+% 4767-03-7
1,3-Dibromotetrafluorobenzene, 98% 1559-87-1
2-Methyl-1-buten-3-yne, 98% 78-80-8
Mercury, P.A. 7439-97-6
Methyl acetate, 99% 79-20-9
ACES 7365-82-4
Methyl benzoate, 99% 93-58-3
2-Methoxyethanol, 99+% 109-86-4
ADA, BioGRADE 26239-55-4
Methyl cellulose (2% solution in water) viscosity 3500-5600 9004-67-5
BES, BioGRADE 10191-18-1
4-Methyl-2-Pentanone, 99.5%, Spectrophoto- Metric Grade 108-10-1

Free MSDS Search ( Providing 250,000+ Material Properties )
Chemcas.com| Ads link:todaystock.net