Search   
MSDS 
:
 2,5-Diethoxyaniline, 96%
CAS 
:
 94-85-9
SYNONYMS 
:
 None Known.
**** SECTION 2 - COMPOSITION, INFORMATION ON INGREDIENTS ****

+----------------+--------------------------------------+----------+-----------+
| CAS# | Chemical Name | % | EINECS# |
|----------------|--------------------------------------|----------|-----------|
| 94-85-9 |2,5-Diethoxyaniline | 96% | 202-369-5 |
+----------------+--------------------------------------+----------+-----------+
Hazard Symbols: XN
Risk Phrases: 20/21/22

**** SECTION 3 - HAZARDS IDENTIFICATION ****

EMERGENCY OVERVIEW
Harmful by inhalation, in contact with skin and if swallowed.Light
sensitive.The toxicological properties of this material have not been
fully investigated.

Potential Health Effects
Eye:
May cause eye irritation.
Skin:
May cause skin irritation. Harmful if absorbed through the skin.
Ingestion:
Harmful if swallowed. May cause irritation of the digestive tract.
The toxicological properties of this substance have not been fully
investigated.
Inhalation:
Harmful if inhaled. May cause respiratory tract irritation. The
toxicological properties of this substance have not been fully
investigated.
Chronic:
No information found.

**** SECTION 4 - FIRST AID MEASURES ****

Eyes:
In case of contact, immediately flush eyes with plenty of water for
at least 15 minutes. Get medical aid.
Skin:
In case of contact, flush skin with plenty of water. Remove
contaminated clothing and shoes. Get medical aid if irritation
develops and persists. Wash clothing before reuse.
Ingestion:
If swallowed, do not induce vomiting unless directed to do so by
medical personnel. Never give anything by mouth to an unconscious
person. Get medical aid.
Inhalation:
Remove from exposure and move to fresh air immediately. If not
breathing, give artificial respiration. If breathing is difficult,
give oxygen. Get medical aid.
Notes to Physician:
Treat symptomatically and supportively.

**** SECTION 5 - FIRE FIGHTING MEASURES ****

General Information:
As in any fire, wear a self-contained breathing apparatus in
pressure-demand, MSHA/NIOSH (approved or equivalent), and full
protective gear. During a fire, irritating and highly toxic gases
may be generated by thermal decomposition or combustion.
Extinguishing Media:
Use water spray, dry chemical, carbon dioxide, or chemical foam.

**** SECTION 6 - ACCIDENTAL RELEASE MEASURES ****

General Information: Use proper personal protective equipment as indicated
in Section 8.
Spills/Leaks:
Vacuum or sweep up material and place into a suitable disposal
container. Clean up spills immediately, observing precautions in the
Protective Equipment section. Avoid generating dusty conditions.
Provide ventilation.

**** SECTION 7 - HANDLING and STORAGE ****

Handling:
Wash thoroughly after handling. Use with adequate ventilation.
Minimize dust generation and accumulation. Avoid breathing dust,
vapor, mist, or gas. Avoid contact with eyes, skin, and clothing.
Keep container tightly closed. Avoid ingestion and inhalation. Store
protected from light.
Storage:
Store in a cool, dry place. Store in a tightly closed container.
Keep under a nitrogen blanket. Store protected from light.

**** SECTION 8 - EXPOSURE CONTROLS, PERSONAL PROTECTION ****

Engineering Controls:
Facilities storing or utilizing this material should be equipped
with an eyewash facility and a safety shower. Use adequate
ventilation to keep airborne concentrations low.
Exposure Limits
CAS# 94-85-9:


Personal Protective Equipment

Eyes:
Wear appropriate protective eyeglasses or chemical
safety goggles as described by OSHA's eye and face
protection regulations in 29 CFR 1910.133 or European
Standard EN166.
Skin:
Wear appropriate protective gloves to prevent skin
exposure.
Clothing:
Wear appropriate protective clothing to prevent skin
exposure.
Respirators:
Follow the OSHA respirator regulations found in 29
CFR 1910.134 or European Standard EN 149. Use a
NIOSH/MSHA or European Standard EN 149 approved
respirator if exposure limits are exceeded or if
irritation or other symptoms are experienced.

**** SECTION 9 - PHYSICAL AND CHEMICAL PROPERTIES ****

Physical State: Crystalline powder
Color: red-purple
Odor: Not available.
pH: Not available.
Vapor Pressure: Not available.
Viscosity: Not available.
Boiling Point: 190-192 deg C @ 30mmHg
Freezing/Melting Point: 85 deg C
Autoignition Temperature: Not available.
Flash Point: Not available.
Explosion Limits, lower: Not available.
Explosion Limits, upper: Not available.
Decomposition Temperature:
Solubility in water:
Specific Gravity/Density:
Molecular Formula: (C2H5O)2C6H3NH2
Molecular Weight: 181.1105

**** SECTION 10 - STABILITY AND REACTIVITY ****

Chemical Stability:
Stable under normal temperatures and pressures. Light sensitive.
Conditions to Avoid:
Light, dust generation, excess heat.
Incompatibilities with Other Materials:
Strong oxidizing agents, acids, acid anhydrides, acid chlorides,
chloroformates.
Hazardous Decomposition Products:
Nitrogen oxides, carbon monoxide, carbon dioxide.
Hazardous Polymerization: Has not been reported

**** SECTION 11 - TOXICOLOGICAL INFORMATION ****

RTECS#:
CAS# 94-85-9 unlisted.
LD50/LC50:
Not available.
Carcinogenicity:
2,5-Diethoxyaniline -
Not listed by ACGIH, IARC, or NTP.

**** SECTION 12 - ECOLOGICAL INFORMATION ****



**** SECTION 13 - DISPOSAL CONSIDERATIONS ****

Dispose of in a manner consistent with federal, state, and local regulations.

**** SECTION 14 - TRANSPORT INFORMATION ****

IATA
Not regulated as a hazardous material.
IMO
Not regulated as a hazardous material.
RID/ADR
Not regulated as a hazardous material.

**** SECTION 15 - REGULATORY INFORMATION ****

European/International Regulations
European Labeling in Accordance with EC Directives
Hazard Symbols: XN
Risk Phrases:
R 20/21/22 Harmful by inhalation, in contact with
skin and if swallowed.
Safety Phrases:
S 36/37 Wear suitable protective clothing and
gloves.
WGK (Water Danger/Protection)
CAS# 94-85-9: 1
Canada
CAS# 94-85-9 is listed on Canada's NDSL List.
CAS# 94-85-9 is not listed on Canada's Ingredient Disclosure List.
US FEDERAL
TSCA
CAS# 94-85-9 is listed on the TSCA inventory.

**** SECTION 16 - ADDITIONAL INFORMATION ****

MSDS Creation Date: 12/24/1998 Revision #4 Date: 5/04/2004

The information above is believed to be accurate and represents the best
information currently available to us. However, we make no warranty of
merchantability or any other warranty, express or implied, with respect to
such information, and we assume no liability resulting from its use. Users
should make their own investigations to determine the suitability of the
information for their particular purposes. In no way shall the company be
liable for any claims, losses, or damages of any third party or for lost
profits or any special, indirect, incidental, consequential or exemplary
damages, howsoever arising, even if the company has been advised of
the possibility of such damages.
--------------------------------------------------------------------------------
--------------------------------------------------------------------------------
Search More   
ALL MSDS PAGES IN THIS GROUP
NAMECAS
4-Fluoro-2-methylphenol, 98% 452-72-2
1,2-Dimethyl-6,7-dimethoxy-1,2,3,4-tetrahydroisoquinoline 5852-92-6
D-(+)-Maltose monohydrate, 92-93% 69-79-4
6,7-Dihydroxy-1-methyl-1,2,3,4-tetrahydroisoquinoline hydrobromide, 38221-21-5
Manganese (II) Chloride Tetrahydrate, P.A. 13446-34-9
6-Azabicyclo[3.2.0]Heptan-7-one, 98% 22031-52-3
Manganese(IV) Oxide, Precipitated Active, 88% (Titr.) 1313-13-9
7-Azabicyclo[4.2.0]heptan-8-one, 98% 34102-49-3
Manganese (II) Sulfate Monohydrate, Reagent ACS 10034-96-5
3-Amino-4,4-Dimethylpentanoic Acid, 98% 0-01-1
3-Amino-4-Ethylhexanoic Acid, 98% 0-01-1
D(+)-Mannitol, P.A. 69-65-8
Stoddard Solvent 8052-41-3
3-Amino-5-methylhexanoic acid, 98% 3653-34-7
Dl-citrulline, 97% 627-77-0
2-Mercaptoethanol, 99% 60-24-2
Aluminum Hydroxide, Powder 21645-51-2
N,N'-bis(p-butoxybenzylidene)-alpha, alpha'-bi-p-toluidine 59261-10-8
Mercuric acetate, p.a. 1600-27-7
Mercury (II) Bromide, P.A. 7789-47-1
Hexaethylbenzene 604-88-6
3-Amino-5-phenylpentanoic acid, 98% 91247-38-0
Ethyl-cis-2-isothiocyanato-1-cyclopentanecarboxylate, 97% 311341-94-3
Aluminum nitrate nonahydrate 7784-27-2
Mercury(II) chloride, reagent ACS, crystals 7487-94-7
Molybdenum, powder, 99.99%, - 200 mesh 7439-98-7
Ethyl-cis-2-Isothiocyanato-1-Cyclohexanecarboxylate, 97% 0-01-1
Boc-L-Alanine, 99+% 15761-38-3
Poly(caprolactone) Triol, Average M.W.300 39280-09-6
Mercury (II) Iodide, Red, P.A. 7774-29-0
Mercury (II) Nitrate Monohydrate, Reagent ACS 7783-34-8
Alumina (Activated/Adsorption/Dry Powder/Acid/Basic/Neutral/Polishing 1344-28-1
N-Isopropyl-1-Piperazineacetamide, 95+% 39890-42-1
2,5-Diethoxyaniline, 96% 94-85-9
Mercury (II) Oxide, Yellow, P.A. 21908-53-2
Mercury (II) Sulfate, Reagent ACS (Powder) 7783-35-9
Mercury Chloride, P.A 10112-91-1
Chloroacetyl chloride, 98% 79-04-9
2,2-Bis(hydroxymethyl)propionic acid, 99+% 4767-03-7
1,3-Dibromotetrafluorobenzene, 98% 1559-87-1
2-Methyl-1-buten-3-yne, 98% 78-80-8
Mercury, P.A. 7439-97-6
Methyl acetate, 99% 79-20-9
ACES 7365-82-4
Methyl benzoate, 99% 93-58-3
2-Methoxyethanol, 99+% 109-86-4
ADA, BioGRADE 26239-55-4
Methyl cellulose (2% solution in water) viscosity 3500-5600 9004-67-5
BES, BioGRADE 10191-18-1
4-Methyl-2-Pentanone, 99.5%, Spectrophoto- Metric Grade 108-10-1

Free MSDS Search ( Providing 250,000+ Material Properties )
Chemcas.com| Ads link:todaystock.net