**** SECTION 2 - COMPOSITION, INFORMATION ON INGREDIENTS ****
+----------------+--------------------------------------+----------+-----------+
| CAS# | Chemical Name | % | EINECS# |
|----------------|--------------------------------------|----------|-----------|
| 7783-35-9 | Mercuric Sulfate | >98 | 231-992-5 |
+----------------+--------------------------------------+----------+-----------+
Hazard Symbols: T+
Risk Phrases: 26/27/28 33
**** SECTION 3 - HAZARDS IDENTIFICATION ****
EMERGENCY OVERVIEW
Very toxic by inhalation, in contact with skin and if swallowed.
Danger of cumulative effects.Toxic.Hygroscopic (absorbs moisture from
the air).Light sensitive.Moisture sensitive.
Potential Health Effects
Eye:
Contact may cause severe eye irritation and possible eye damage.
Skin:
May be absorbed through the skin. May cause severe irritation and
possible burns.
Ingestion:
Harmful if swallowed. May cause kidney damage. May cause severe
digestive tract irritation with abdominal pain, nausea, vomiting and
diarrhea. May cause corrosion and permanent tissue destruction of the
esophagus and digestive tract.
Inhalation:
May cause severe irritation of the respiratory tract with sore
throat, coughing, shortness of breath and delayed lung edema. May
cause effects similar to those described for ingestion.
Chronic:
Chronic inhalation and ingestion may cause effects similar to those
of acute inhalation and ingestion. May cause anemia and other blood
cell abnormalities. Repeated exposure may cause central nervous
system damage.
**** SECTION 4 - FIRST AID MEASURES ****
Eyes:
Immediately flush eyes with plenty of water for at least 15 minutes,
occasionally lifting the upper and lower eyelids. Get medical aid
immediately.
Skin:
Get medical aid immediately. Immediately flush skin with plenty of
water for at least 15 minutes while removing contaminated clothing
and shoes.
Ingestion:
If victim is conscious and alert, give 2-4 cupfuls of milk or water.
Never give anything by mouth to an unconscious person. Get medical
aid immediately.
Inhalation:
Get medical aid immediately. Remove from exposure and move to fresh
air immediately. If not breathing, give artificial respiration. If
breathing is difficult, give oxygen.
Notes to Physician:
Antidote:
The use of Dimercaprol or BAL (British Anti-Lewisite) as a chelating
agent should be determined by qualified medical personnel.
**** SECTION 5 - FIRE FIGHTING MEASURES ****
General Information:
As in any fire, wear a self-contained breathing apparatus in
pressure-demand, MSHA/NIOSH (approved or equivalent), and full
protective gear. Combustion generates toxic fumes.
Extinguishing Media:
Use foam, dry chemical, or carbon dioxide. Use agent most
appropriate to extinguish fire.
**** SECTION 6 - ACCIDENTAL RELEASE MEASURES ****
General Information: Use proper personal protective equipment as indicated
in Section 8.
Spills/Leaks:
Sweep up or absorb material, then place into a suitable clean, dry,
closed container for disposal. Avoid generating dusty conditions.
Provide ventilation.
**** SECTION 7 - HANDLING and STORAGE ****
Handling:
Wash thoroughly after handling. Remove contaminated clothing and
wash before reuse. Use with adequate ventilation. Minimize dust
generation and accumulation. Do not get in eyes, on skin, or on
clothing. Keep container tightly closed. Do not ingest or inhale.
Store protected from light.
Storage:
Do not store in direct sunlight. Store in a tightly closed
container. Store in a cool, dry, well-ventilated area away from
incompatible substances. Poison room locked.
**** SECTION 8 - EXPOSURE CONTROLS, PERSONAL PROTECTION ****
Engineering Controls:
Use adequate general or local explosion-proof ventilation to keep
airborne levels to acceptable levels.
Exposure Limits
CAS# 7783-35-9:
United States OSHA: 0.1 mg/m3 Ceiling (listed under Mercury, ary
and inorganic compounds).
Belgium - TWA: (listed as mercury, aryl and inorganic compounds):
mg/m3 VLE (as Hg)
France - VME: (listed as mercury, aryl and inorganic compounds):
mg/m3 VME (as Hg)
Germany: (listed as mercury, aryl and inorganic compounds): 0.1 m
VME (as Hg)
Germany: (listed as mercury inorganic compounds): Skin absorber
Malaysia: (listed as mercury, aryl and inorganic compounds): 0.1
mg/m3 TWA (as Hg)
Netherlands: (listed as mercury inorganic compounds): 0.15 mg/m3
Netherlands: (listed as mercury inorganic compounds): 0.05 mg/m3
Russia: (listed as mercury inorganic compounds): 0.2 mg/m3 TWA (a
Hg)
Russia: (listed as mercury inorganic compounds): 0.05 mg/m3 STEL
Hg)
Spain: (listed as mercury, aryl and inorganic compounds): 0.1 mg/
VLA-ED (as Hg)
Personal Protective Equipment
Eyes:
Wear appropriate protective eyeglasses or chemical
safety goggles as described by OSHA's eye and face
protection regulations in 29 CFR 1910.133 or European
Standard EN166.
Skin:
Wear appropriate gloves to prevent skin exposure.
Clothing:
Wear appropriate protective clothing to prevent skin
exposure.
Respirators:
Follow the OSHA respirator regulations found in 29
CFR 1910.134 or European Standard EN 149. Use a
NIOSH/MSHA or European Standard EN 149 approved
respirator if exposure limits are exceeded or if
irritation or other symptoms are experienced.
**** SECTION 9 - PHYSICAL AND CHEMICAL PROPERTIES ****
Physical State: Powder
Color: white
Odor: None reported.
pH: Not available.
Vapor Pressure: Negligible.
Viscosity: Not available.
Boiling Point: Not available.
Freezing/Melting Point: Not available.
Autoignition Temperature: Not available.
Flash Point: Not available.
Explosion Limits, lower: Not available.
Explosion Limits, upper: Not available.
Decomposition Temperature:
Solubility in water: Insoluble.
Specific Gravity/Density: 6.4700g/cm3
Molecular Formula: HgO4S
Molecular Weight: 296.64
**** SECTION 10 - STABILITY AND REACTIVITY ****
Chemical Stability:
Stable under normal temperatures and pressures.
Conditions to Avoid:
High temperatures, incompatible materials, light, moisture.
Incompatibilities with Other Materials:
Substance decomposes when exposed to water, violently reacts with
hydrogen chloride, and is corrosive to many metals (including
aluminum, copper, iron, magnesium, lead, and zinc).
Hazardous Decomposition Products:
Oxides of sulfur, mercury/mercury oxides.
Hazardous Polymerization: Has not been reported.
**** SECTION 11 - TOXICOLOGICAL INFORMATION ****
RTECS#:
CAS# 7783-35-9: OX0500000
LD50/LC50:
CAS# 7783-35-9: Oral, mouse: LD50 = 25 mg/kg; Oral, rat: LD50 = 57
mg/kg; Skin, rat: LD50 = 625 mg/kg.
Carcinogenicity:
Mercuric Sulfate -
Not listed by ACGIH, IARC, or NTP.
Other:
See actual entry in RTECS for complete information.
**** SECTION 12 - ECOLOGICAL INFORMATION ****
Other
No information available.
**** SECTION 13 - DISPOSAL CONSIDERATIONS ****
Dispose of in a manner consistent with federal, state, and local regulations.
**** SECTION 14 - TRANSPORT INFORMATION ****
IATA
Shipping Name: MERCURY SULPHATE
Hazard Class: 6.1
UN Number: 1645
Packing Group: II
IMO
Shipping Name: MERCURY SULPHATE
Hazard Class: 6.1
UN Number: 1645
Packing Group: II
RID/ADR
Shipping Name: MERCURY SULPHATE
Hazard Class: 6.1
UN Number: 1645
Packing group: II
USA RQ: CAS# 7783-35-9: 10 lb final RQ; 4.54 kg final RQ
**** SECTION 15 - REGULATORY INFORMATION ****
European/International Regulations
European Labeling in Accordance with EC Directives
Hazard Symbols: T+
Risk Phrases:
R 26/27/28 Very toxic by inhalation, in contact with
skin and if swallowed.
R 33 Danger of cumulative effects.
Safety Phrases:
S 1/2 Keep locked up and out of reach of children.
S 13 Keep away from food, drink and animal feeding
stuffs.
S 28 After contact with skin, wash immediately
with...
S 28A After contact with skin, wash immediately with
plenty of water.
S 45 In case of accident or if you feel unwell, seek
medical advice immediately (show the label where
possible).
WGK (Water Danger/Protection)
CAS# 7783-35-9: 3
Canada
CAS# 7783-35-9 is listed on Canada's DSL List.
CAS# 7783-35-9 is listed on Canada's Ingredient Disclosure List.
US FEDERAL
TSCA
CAS# 7783-35-9 is listed on the TSCA inventory.
**** SECTION 16 - ADDITIONAL INFORMATION ****
MSDS Creation Date: 7/16/1998 Revision #2 Date: 3/18/2003
The information above is believed to be accurate and represents the best
information currently available to us. However, we make no warranty of
merchantability or any other warranty, express or implied, with respect to
such information, and we assume no liability resulting from its use. Users
should make their own investigations to determine the suitability of the
information for their particular purposes. In no way shall the company be
liable for any claims, losses, or damages of any third party or for lost
profits or any special, indirect, incidental, consequential or exemplary
damages, howsoever arising, even if the company has been advised of
the possibility of such damages.
--------------------------------------------------------------------------------
--------------------------------------------------------------------------------
|
|
|
| ALL MSDS PAGES IN THIS GROUP
| | NAME | CAS |
|
4-Fluoro-2-methylphenol, 98%
| 452-72-2 |
|
1,2-Dimethyl-6,7-dimethoxy-1,2,3,4-tetrahydroisoquinoline
| 5852-92-6 |
|
D-(+)-Maltose monohydrate, 92-93%
| 69-79-4 |
|
6,7-Dihydroxy-1-methyl-1,2,3,4-tetrahydroisoquinoline hydrobromide,
| 38221-21-5 |
|
Manganese (II) Chloride Tetrahydrate, P.A.
| 13446-34-9 |
|
6-Azabicyclo[3.2.0]Heptan-7-one, 98%
| 22031-52-3 |
|
Manganese(IV) Oxide, Precipitated Active, 88% (Titr.)
| 1313-13-9 |
|
7-Azabicyclo[4.2.0]heptan-8-one, 98%
| 34102-49-3 |
|
Manganese (II) Sulfate Monohydrate, Reagent ACS
| 10034-96-5 |
|
3-Amino-4,4-Dimethylpentanoic Acid, 98%
| 0-01-1 |
|
3-Amino-4-Ethylhexanoic Acid, 98%
| 0-01-1 |
|
D(+)-Mannitol, P.A.
| 69-65-8 |
|
Stoddard Solvent
| 8052-41-3 |
|
3-Amino-5-methylhexanoic acid, 98%
| 3653-34-7 |
|
Dl-citrulline, 97%
| 627-77-0 |
|
2-Mercaptoethanol, 99%
| 60-24-2 |
|
Aluminum Hydroxide, Powder
| 21645-51-2 |
|
N,N'-bis(p-butoxybenzylidene)-alpha, alpha'-bi-p-toluidine
| 59261-10-8 |
|
Mercuric acetate, p.a.
| 1600-27-7 |
|
Mercury (II) Bromide, P.A.
| 7789-47-1 |
|
Hexaethylbenzene
| 604-88-6 |
|
3-Amino-5-phenylpentanoic acid, 98%
| 91247-38-0 |
|
Ethyl-cis-2-isothiocyanato-1-cyclopentanecarboxylate, 97%
| 311341-94-3 |
|
Aluminum nitrate nonahydrate
| 7784-27-2 |
|
Mercury(II) chloride, reagent ACS, crystals
| 7487-94-7 |
|
Molybdenum, powder, 99.99%, - 200 mesh
| 7439-98-7 |
|
Ethyl-cis-2-Isothiocyanato-1-Cyclohexanecarboxylate, 97%
| 0-01-1 |
|
Boc-L-Alanine, 99+%
| 15761-38-3 |
|
Poly(caprolactone) Triol, Average M.W.300
| 39280-09-6 |
|
Mercury (II) Iodide, Red, P.A.
| 7774-29-0 |
|
Mercury (II) Nitrate Monohydrate, Reagent ACS
| 7783-34-8 |
|
Alumina (Activated/Adsorption/Dry Powder/Acid/Basic/Neutral/Polishing
| 1344-28-1 |
|
N-Isopropyl-1-Piperazineacetamide, 95+%
| 39890-42-1 |
|
2,5-Diethoxyaniline, 96%
| 94-85-9 |
|
Mercury (II) Oxide, Yellow, P.A.
| 21908-53-2 |
|
Mercury (II) Sulfate, Reagent ACS (Powder)
| 7783-35-9 |
|
Mercury Chloride, P.A
| 10112-91-1 |
|
Chloroacetyl chloride, 98%
| 79-04-9 |
|
2,2-Bis(hydroxymethyl)propionic acid, 99+%
| 4767-03-7 |
|
1,3-Dibromotetrafluorobenzene, 98%
| 1559-87-1 |
|
2-Methyl-1-buten-3-yne, 98%
| 78-80-8 |
|
Mercury, P.A.
| 7439-97-6 |
|
Methyl acetate, 99%
| 79-20-9 |
|
ACES
| 7365-82-4 |
|
Methyl benzoate, 99%
| 93-58-3 |
|
2-Methoxyethanol, 99+%
| 109-86-4 |
|
ADA, BioGRADE
| 26239-55-4 |
|
Methyl cellulose (2% solution in water) viscosity 3500-5600
| 9004-67-5 |
|
BES, BioGRADE
| 10191-18-1 |
|
4-Methyl-2-Pentanone, 99.5%, Spectrophoto- Metric Grade
| 108-10-1 |
|
|