Search   
MSDS 
:
 Methyl cellulose (2% solution in water)  viscosity 3500-5600
CAS 
:
 9004-67-5
SYNONYMS 
:
 
**** SECTION 2 - COMPOSITION, INFORMATION ON INGREDIENTS ****

+----------------+--------------------------------------+----------+-----------+
| CAS# | Chemical Name | % | EINECS# |
|----------------|--------------------------------------|----------|-----------|
| 9004-67-5 |Methyl Cellulose | 2 | 232-674-9 |
+----------------+--------------------------------------+----------+-----------+
Hazard Symbols: None Listed.
Risk Phrases: None Listed.

**** SECTION 3 - HAZARDS IDENTIFICATION ****

EMERGENCY OVERVIEW
The toxicological properties of this material have not been fully
investigated.

Potential Health Effects
Eye:
Low hazard for normal industrial handling.
Skin:
Low hazard for usual industrial handling.
Ingestion:
Low hazard for usual industrial handling. The toxicological
properties of this substance have not been fully investigated.
Inhalation:
Low hazard for usual industrial handling. The toxicological
properties of this substance have not been fully investigated.
Chronic:
No information found.

**** SECTION 4 - FIRST AID MEASURES ****

Eyes:
Flush eyes with plenty of water for at least 15 minutes,
occasionally lifting the upper and lower eyelids. If irritation
develops, get medical aid.
Skin:
Flush skin with plenty of water for at least 15 minutes while
removing contaminated clothing and shoes. Get medical aid if
irritation develops or persists.
Ingestion:
If victim is conscious and alert, give 2-4 cupfuls of milk or water.
Get medical aid.
Inhalation:
Remove from exposure and move to fresh air immediately. If not
breathing, give artificial respiration. If breathing is difficult,
give oxygen. Get medical aid if cough or other symptoms appear.
Notes to Physician:

**** SECTION 5 - FIRE FIGHTING MEASURES ****

General Information:
As in any fire, wear a self-contained breathing apparatus in
pressure-demand, MSHA/NIOSH (approved or equivalent), and full
protective gear. Dusts at sufficient concentrations can form
explosive mixtures with air. Combustion generates toxic fumes.
Extinguishing Media:
For small fires, use water spray, dry chemical, carbon dioxide or
chemical foam.

**** SECTION 6 - ACCIDENTAL RELEASE MEASURES ****

General Information: Use proper personal protective equipment as indicated
in Section 8.
Spills/Leaks:
Sweep up, then place into a suitable container for disposal. Avoid
generating dusty conditions. Provide ventilation.

**** SECTION 7 - HANDLING and STORAGE ****

Handling:
Wash thoroughly after handling. Remove contaminated clothing and
wash before reuse. Use with adequate ventilation. Minimize dust
generation and accumulation. Avoid contact with eyes, skin, and
clothing. Avoid ingestion and inhalation.
Storage:
Store in a cool, dry, well-ventilated area away from incompatible
substances. Keep containers tightly closed.

**** SECTION 8 - EXPOSURE CONTROLS, PERSONAL PROTECTION ****

Engineering Controls:
Facilities storing or utilizing this material should be equipped
with an eyewash facility and a safety shower. Use adequate
ventilation to keep airborne concentrations low.
Exposure Limits
CAS# 9004-67-5:


Personal Protective Equipment

Eyes:
Wear appropriate protective eyeglasses or chemical
safety goggles as described by OSHA's eye and face
protection regulations in 29 CFR 1910.133 or European
Standard EN166.
Skin:
Wear appropriate protective gloves to prevent skin
exposure.
Clothing:
Wear appropriate protective clothing to prevent skin
exposure.
Respirators:
A respiratory protection program that meets OSHA's 29
CFR 1910.134 and ANSI Z88.2 requirements or European
Standard EN 149 must be followed whenever workplace
conditions warrant respirator use.

**** SECTION 9 - PHYSICAL AND CHEMICAL PROPERTIES ****

Physical State: Solid
Color: white to yellowish white or grayish white
Odor: None reported.
pH: Not available.
Vapor Pressure: Negligible.
Viscosity: Not available.
Boiling Point: Not available.
Freezing/Melting Point: Not available.
Autoignition Temperature: Not applicable.
Flash Point: Not applicable.
Explosion Limits, lower: Not available.
Explosion Limits, upper: Not available.
Decomposition Temperature: Not available.
Solubility in water: Soluble.
Specific Gravity/Density: Not available.
Molecular Formula: Not applicable.
Molecular Weight:

**** SECTION 10 - STABILITY AND REACTIVITY ****

Chemical Stability:
Stable under normal temperatures and pressures.
Conditions to Avoid:
High temperatures.
Incompatibilities with Other Materials:
Strong oxidizing agents.
Hazardous Decomposition Products:
Carbon monoxide, carbon dioxide.
Hazardous Polymerization: Has not been reported.

**** SECTION 11 - TOXICOLOGICAL INFORMATION ****

RTECS#:
CAS# 9004-67-5: FJ5959000
LD50/LC50:
Not available.
Carcinogenicity:
Methyl Cellulose -
Not listed by ACGIH, IARC, or NTP.
Other:
See actual entry in RTECS for complete information.

**** SECTION 12 - ECOLOGICAL INFORMATION ****

Other
No information available.

**** SECTION 13 - DISPOSAL CONSIDERATIONS ****

Dispose of in a manner consistent with federal, state, and local regulations.

**** SECTION 14 - TRANSPORT INFORMATION ****

IATA
Not regulated as a hazardous material.
IMO
Not regulated as a hazardous material.
RID/ADR
Not regulated as a hazardous material.

**** SECTION 15 - REGULATORY INFORMATION ****

European/International Regulations
European Labeling in Accordance with EC Directives
Hazard Symbols: Not available.
Risk Phrases:
Safety Phrases:
S 24/25 Avoid contact with skin and eyes.
WGK (Water Danger/Protection)
CAS# 9004-67-5: 1
Canada
CAS# 9004-67-5 is listed on Canada's DSL List.
CAS# 9004-67-5 is not listed on Canada's Ingredient Disclosure List.
US FEDERAL
TSCA
CAS# 9004-67-5 is listed on the TSCA inventory.

**** SECTION 16 - ADDITIONAL INFORMATION ****

MSDS Creation Date: 11/30/1998 Revision #5 Date: 3/18/2003

The information above is believed to be accurate and represents the best
information currently available to us. However, we make no warranty of
merchantability or any other warranty, express or implied, with respect to
such information, and we assume no liability resulting from its use. Users
should make their own investigations to determine the suitability of the
information for their particular purposes. In no way shall the company be
liable for any claims, losses, or damages of any third party or for lost
profits or any special, indirect, incidental, consequential or exemplary
damages, howsoever arising, even if the company has been advised of
the possibility of such damages.
--------------------------------------------------------------------------------
--------------------------------------------------------------------------------
Search More   
ALL MSDS PAGES IN THIS GROUP
NAMECAS
4-Fluoro-2-methylphenol, 98% 452-72-2
1,2-Dimethyl-6,7-dimethoxy-1,2,3,4-tetrahydroisoquinoline 5852-92-6
D-(+)-Maltose monohydrate, 92-93% 69-79-4
6,7-Dihydroxy-1-methyl-1,2,3,4-tetrahydroisoquinoline hydrobromide, 38221-21-5
Manganese (II) Chloride Tetrahydrate, P.A. 13446-34-9
6-Azabicyclo[3.2.0]Heptan-7-one, 98% 22031-52-3
Manganese(IV) Oxide, Precipitated Active, 88% (Titr.) 1313-13-9
7-Azabicyclo[4.2.0]heptan-8-one, 98% 34102-49-3
Manganese (II) Sulfate Monohydrate, Reagent ACS 10034-96-5
3-Amino-4,4-Dimethylpentanoic Acid, 98% 0-01-1
3-Amino-4-Ethylhexanoic Acid, 98% 0-01-1
D(+)-Mannitol, P.A. 69-65-8
Stoddard Solvent 8052-41-3
3-Amino-5-methylhexanoic acid, 98% 3653-34-7
Dl-citrulline, 97% 627-77-0
2-Mercaptoethanol, 99% 60-24-2
Aluminum Hydroxide, Powder 21645-51-2
N,N'-bis(p-butoxybenzylidene)-alpha, alpha'-bi-p-toluidine 59261-10-8
Mercuric acetate, p.a. 1600-27-7
Mercury (II) Bromide, P.A. 7789-47-1
Hexaethylbenzene 604-88-6
3-Amino-5-phenylpentanoic acid, 98% 91247-38-0
Ethyl-cis-2-isothiocyanato-1-cyclopentanecarboxylate, 97% 311341-94-3
Aluminum nitrate nonahydrate 7784-27-2
Mercury(II) chloride, reagent ACS, crystals 7487-94-7
Molybdenum, powder, 99.99%, - 200 mesh 7439-98-7
Ethyl-cis-2-Isothiocyanato-1-Cyclohexanecarboxylate, 97% 0-01-1
Boc-L-Alanine, 99+% 15761-38-3
Poly(caprolactone) Triol, Average M.W.300 39280-09-6
Mercury (II) Iodide, Red, P.A. 7774-29-0
Mercury (II) Nitrate Monohydrate, Reagent ACS 7783-34-8
Alumina (Activated/Adsorption/Dry Powder/Acid/Basic/Neutral/Polishing 1344-28-1
N-Isopropyl-1-Piperazineacetamide, 95+% 39890-42-1
2,5-Diethoxyaniline, 96% 94-85-9
Mercury (II) Oxide, Yellow, P.A. 21908-53-2
Mercury (II) Sulfate, Reagent ACS (Powder) 7783-35-9
Mercury Chloride, P.A 10112-91-1
Chloroacetyl chloride, 98% 79-04-9
2,2-Bis(hydroxymethyl)propionic acid, 99+% 4767-03-7
1,3-Dibromotetrafluorobenzene, 98% 1559-87-1
2-Methyl-1-buten-3-yne, 98% 78-80-8
Mercury, P.A. 7439-97-6
Methyl acetate, 99% 79-20-9
ACES 7365-82-4
Methyl benzoate, 99% 93-58-3
2-Methoxyethanol, 99+% 109-86-4
ADA, BioGRADE 26239-55-4
Methyl cellulose (2% solution in water) viscosity 3500-5600 9004-67-5
BES, BioGRADE 10191-18-1
4-Methyl-2-Pentanone, 99.5%, Spectrophoto- Metric Grade 108-10-1

Free MSDS Search ( Providing 250,000+ Material Properties )
Chemcas.com| Ads link:todaystock.net