Search   
MSDS 
:
 2,2-Bis(hydroxymethyl)propionic acid, 99+%
CAS 
:
 4767-03-7
SYNONYMS 
:
 Propanoic acid,3-hydroxy-2-(hydroxymethyl)-2-methyl-;     Dimethylolpropionic acid.
**** SECTION 2 - COMPOSITION, INFORMATION ON INGREDIENTS ****

+----------------+--------------------------------------+----------+-----------+
| CAS# | Chemical Name | % | EINECS# |
|----------------|--------------------------------------|----------|-----------|
| 4767-03-7 |2,2-Bis(hydroxymethyl)propionic acid | 99+ | 225-306-3 |
+----------------+--------------------------------------+----------+-----------+
Hazard Symbols: XI
Risk Phrases: 36/37

**** SECTION 3 - HAZARDS IDENTIFICATION ****

EMERGENCY OVERVIEW
Irritating to eyes and respiratory system.The toxicological
properties of this material have not been fully investigated.

Potential Health Effects
Eye:
Causes eye irritation.
Skin:
May cause skin irritation. May be harmful if absorbed through the
skin.
Ingestion:
May cause gastrointestinal irritation with nausea, vomiting and
diarrhea. The toxicological properties of this substance have not
been fully investigated. May be harmful if swallowed.
Inhalation:
Causes respiratory tract irritation. The toxicological properties of
this substance have not been fully investigated. May be harmful if
inhaled.
Chronic:
No information found.

**** SECTION 4 - FIRST AID MEASURES ****

Eyes:
Immediately flush eyes with plenty of water for at least 15 minutes,
occasionally lifting the upper and lower eyelids. Get medical aid
immediately.
Skin:
Get medical aid. Flush skin with plenty of water for at least 15
minutes while removing contaminated clothing and shoes. Wash clothing
before reuse.
Ingestion:
Do not induce vomiting. If victim is conscious and alert, give 2-4
cupfuls of milk or water. Never give anything by mouth to an
unconscious person. Get medical aid immediately.
Inhalation:
Get medical aid immediately. Remove from exposure and move to fresh
air immediately. If not breathing, give artificial respiration. If
breathing is difficult, give oxygen.
Notes to Physician:
Treat symptomatically and supportively.

**** SECTION 5 - FIRE FIGHTING MEASURES ****

General Information:
As in any fire, wear a self-contained breathing apparatus in
pressure-demand, MSHA/NIOSH (approved or equivalent), and full
protective gear. During a fire, irritating and highly toxic gases
may be generated by thermal decomposition or combustion.
Extinguishing Media:
Use water spray, dry chemical, carbon dioxide, or appropriate foam.

**** SECTION 6 - ACCIDENTAL RELEASE MEASURES ****

General Information: Use proper personal protective equipment as indicated
in Section 8.
Spills/Leaks:
Clean up spills immediately, observing precautions in the Protective
Equipment section. Sweep up, then place into a suitable container for
disposal. Avoid generating dusty conditions. Provide ventilation.

**** SECTION 7 - HANDLING and STORAGE ****

Handling:
Wash thoroughly after handling. Remove contaminated clothing and
wash before reuse. Minimize dust generation and accumulation. Avoid
contact with eyes, skin, and clothing. Avoid ingestion and
inhalation. Keep from contact with moist air and steam.
Storage:
Store in a cool, dry place. Keep container closed when not in use.

**** SECTION 8 - EXPOSURE CONTROLS, PERSONAL PROTECTION ****

Engineering Controls:
Facilities storing or utilizing this material should be equipped
with an eyewash facility and a safety shower. Use process enclosure,
local exhaust ventilation, or other engineering controls to control
airborne levels.
Exposure Limits
CAS# 4767-03-7:


Personal Protective Equipment

Eyes:
Wear appropriate protective eyeglasses or chemical
safety goggles as described by OSHA's eye and face
protection regulations in 29 CFR 1910.133 or European
Standard EN166.
Skin:
Wear appropriate protective gloves to prevent skin
exposure.
Clothing:
Wear appropriate protective clothing to minimize
contact with skin.
Respirators:
A respiratory protection program that meets OSHA's 29
CFR 1910.134 and ANSI Z88.2 requirements or European
Standard EN 149 must be followed whenever workplace
conditions warrant respirator use.

**** SECTION 9 - PHYSICAL AND CHEMICAL PROPERTIES ****

Physical State: Crystalline powder
Color: white
Odor: none reported
pH: 2.6 @ 5%
Vapor Pressure: Not available.
Viscosity: Not available.
Boiling Point: Not available.
Freezing/Melting Point: 188.00 - 191.00 deg C
Autoignition Temperature: Not available.
Flash Point: > 150 deg C (> 302.00 deg F)
Explosion Limits, lower: N/A
Explosion Limits, upper: N/A
Decomposition Temperature:
Solubility in water: soluble
Specific Gravity/Density: 0.840
Molecular Formula: C5H10O4
Molecular Weight: 134.13

**** SECTION 10 - STABILITY AND REACTIVITY ****

Chemical Stability:
Stable under normal temperatures and pressures.
Conditions to Avoid:
Incompatible materials, dust generation, strong oxidants.
Incompatibilities with Other Materials:
Strong oxidizing agents, strong bases.
Hazardous Decomposition Products:
Carbon monoxide, carbon dioxide.
Hazardous Polymerization: Has not been reported

**** SECTION 11 - TOXICOLOGICAL INFORMATION ****

RTECS#:
CAS# 4767-03-7 unlisted.
LD50/LC50:
Not available.
Carcinogenicity:
2,2-Bis(hydroxymethyl)propionic acid -
Not listed by ACGIH, IARC, or NTP.

**** SECTION 12 - ECOLOGICAL INFORMATION ****



**** SECTION 13 - DISPOSAL CONSIDERATIONS ****

Dispose of in a manner consistent with federal, state, and local regulations.

**** SECTION 14 - TRANSPORT INFORMATION ****

IATA
Shipping Name: Not regulated.
Hazard Class:
UN Number:
Packing Group:
IMO
Shipping Name: Not regulated.
Hazard Class:
UN Number:
Packing Group:
RID/ADR
Shipping Name: Not regulated.
Hazard Class:
UN Number:
Packing group:

**** SECTION 15 - REGULATORY INFORMATION ****

European/International Regulations
European Labeling in Accordance with EC Directives
Hazard Symbols: XI
Risk Phrases:
R 36/37 Irritating to eyes and respiratory system.
Safety Phrases:
S 26 In case of contact with eyes, rinse immediately
with plenty of water and seek medical advice.
S 37/39 Wear suitable gloves and eye/face
protection.
WGK (Water Danger/Protection)
CAS# 4767-03-7: 2
Canada
CAS# 4767-03-7 is listed on Canada's DSL List.
CAS# 4767-03-7 is not listed on Canada's Ingredient Disclosure List.
US FEDERAL
TSCA
CAS# 4767-03-7 is listed on the TSCA inventory.

**** SECTION 16 - ADDITIONAL INFORMATION ****

MSDS Creation Date: 3/25/1998 Revision #3 Date: 2/07/2005

The information above is believed to be accurate and represents the best
information currently available to us. However, we make no warranty of
merchantability or any other warranty, express or implied, with respect to
such information, and we assume no liability resulting from its use. Users
should make their own investigations to determine the suitability of the
information for their particular purposes. In no way shall the company be
liable for any claims, losses, or damages of any third party or for lost
profits or any special, indirect, incidental, consequential or exemplary
damages, howsoever arising, even if the company has been advised of
the possibility of such damages.
--------------------------------------------------------------------------------
--------------------------------------------------------------------------------
Search More   
ALL MSDS PAGES IN THIS GROUP
NAMECAS
4-Fluoro-2-methylphenol, 98% 452-72-2
1,2-Dimethyl-6,7-dimethoxy-1,2,3,4-tetrahydroisoquinoline 5852-92-6
D-(+)-Maltose monohydrate, 92-93% 69-79-4
6,7-Dihydroxy-1-methyl-1,2,3,4-tetrahydroisoquinoline hydrobromide, 38221-21-5
Manganese (II) Chloride Tetrahydrate, P.A. 13446-34-9
6-Azabicyclo[3.2.0]Heptan-7-one, 98% 22031-52-3
Manganese(IV) Oxide, Precipitated Active, 88% (Titr.) 1313-13-9
7-Azabicyclo[4.2.0]heptan-8-one, 98% 34102-49-3
Manganese (II) Sulfate Monohydrate, Reagent ACS 10034-96-5
3-Amino-4,4-Dimethylpentanoic Acid, 98% 0-01-1
3-Amino-4-Ethylhexanoic Acid, 98% 0-01-1
D(+)-Mannitol, P.A. 69-65-8
Stoddard Solvent 8052-41-3
3-Amino-5-methylhexanoic acid, 98% 3653-34-7
Dl-citrulline, 97% 627-77-0
2-Mercaptoethanol, 99% 60-24-2
Aluminum Hydroxide, Powder 21645-51-2
N,N'-bis(p-butoxybenzylidene)-alpha, alpha'-bi-p-toluidine 59261-10-8
Mercuric acetate, p.a. 1600-27-7
Mercury (II) Bromide, P.A. 7789-47-1
Hexaethylbenzene 604-88-6
3-Amino-5-phenylpentanoic acid, 98% 91247-38-0
Ethyl-cis-2-isothiocyanato-1-cyclopentanecarboxylate, 97% 311341-94-3
Aluminum nitrate nonahydrate 7784-27-2
Mercury(II) chloride, reagent ACS, crystals 7487-94-7
Molybdenum, powder, 99.99%, - 200 mesh 7439-98-7
Ethyl-cis-2-Isothiocyanato-1-Cyclohexanecarboxylate, 97% 0-01-1
Boc-L-Alanine, 99+% 15761-38-3
Poly(caprolactone) Triol, Average M.W.300 39280-09-6
Mercury (II) Iodide, Red, P.A. 7774-29-0
Mercury (II) Nitrate Monohydrate, Reagent ACS 7783-34-8
Alumina (Activated/Adsorption/Dry Powder/Acid/Basic/Neutral/Polishing 1344-28-1
N-Isopropyl-1-Piperazineacetamide, 95+% 39890-42-1
2,5-Diethoxyaniline, 96% 94-85-9
Mercury (II) Oxide, Yellow, P.A. 21908-53-2
Mercury (II) Sulfate, Reagent ACS (Powder) 7783-35-9
Mercury Chloride, P.A 10112-91-1
Chloroacetyl chloride, 98% 79-04-9
2,2-Bis(hydroxymethyl)propionic acid, 99+% 4767-03-7
1,3-Dibromotetrafluorobenzene, 98% 1559-87-1
2-Methyl-1-buten-3-yne, 98% 78-80-8
Mercury, P.A. 7439-97-6
Methyl acetate, 99% 79-20-9
ACES 7365-82-4
Methyl benzoate, 99% 93-58-3
2-Methoxyethanol, 99+% 109-86-4
ADA, BioGRADE 26239-55-4
Methyl cellulose (2% solution in water) viscosity 3500-5600 9004-67-5
BES, BioGRADE 10191-18-1
4-Methyl-2-Pentanone, 99.5%, Spectrophoto- Metric Grade 108-10-1

Free MSDS Search ( Providing 250,000+ Material Properties )
Chemcas.com| Ads link:todaystock.net