Search   
MSDS 
:
 1-Chlorohexadecane, Ca. 97%(GC)
CAS 
:
 4860-03-1
SYNONYMS 
:
 Hexadecyl Chloride; Cetyl Chloride.
**** SECTION 2 - COMPOSITION, INFORMATION ON INGREDIENTS ****

+----------------+--------------------------------------+----------+-----------+
| CAS# | Chemical Name | % | EINECS# |
|----------------|--------------------------------------|----------|-----------|
| 4860-03-1 |1-CHLOROHEXADECANE | 97% | 225-461-7 |
+----------------+--------------------------------------+----------+-----------+
Hazard Symbols: None Listed.
Risk Phrases: None Listed.

**** SECTION 3 - HAZARDS IDENTIFICATION ****

EMERGENCY OVERVIEW
The toxicological properties of this material have not been fully
investigated.

Potential Health Effects
Eye:
May cause eye irritation.
Skin:
May cause skin irritation.
Ingestion:
May cause irritation of the digestive tract. The toxicological
properties of this substance have not been fully investigated.
Inhalation:
May cause respiratory tract irritation. The toxicological properties
of this substance have not been fully investigated.
Chronic:
No information found.

**** SECTION 4 - FIRST AID MEASURES ****

Eyes:
Flush eyes with plenty of water for at least 15 minutes,
occasionally lifting the upper and lower eyelids. Get medical aid.
Skin:
Get medical aid. Flush skin with plenty of water for at least 15
minutes while removing contaminated clothing and shoes. Wash clothing
before reuse.
Ingestion:
Get medical aid. Do NOT induce vomiting. If conscious and alert,
rinse mouth and drink 2-4 cupfuls of milk or water. Wash mouth out
with water.
Inhalation:
Remove from exposure and move to fresh air immediately. If not
breathing, give artificial respiration. If breathing is difficult,
give oxygen. Get medical aid.
Notes to Physician:

**** SECTION 5 - FIRE FIGHTING MEASURES ****

General Information:
As in any fire, wear a self-contained breathing apparatus in
pressure-demand, MSHA/NIOSH (approved or equivalent), and full
protective gear. During a fire, irritating and highly toxic gases
may be generated by thermal decomposition or combustion. Use water
spray to keep fire-exposed containers cool. Vapors may be heavier
than air. They can spread along the ground and collect in low or
confined areas. Containers may explode when heated.
Extinguishing Media:
Use agent most appropriate to extinguish fire. Cool containers with
flooding quantities of water until well after fire is out. Use water
spray, dry chemical, carbon dioxide, or appropriate foam.

**** SECTION 6 - ACCIDENTAL RELEASE MEASURES ****

General Information: Use proper personal protective equipment as indicated
in Section 8.
Spills/Leaks:
Absorb spill with inert material (e.g. vermiculite, sand or earth),
then place in suitable container. Avoid runoff into storm sewers and
ditches which lead to waterways. Clean up spills immediately,
observing precautions in the Protective Equipment section. Remove all
sources of ignition. Provide ventilation.

**** SECTION 7 - HANDLING and STORAGE ****

Handling:
Wash thoroughly after handling. Use with adequate ventilation. Avoid
breathing dust, vapor, mist, or gas. Avoid contact with eyes, skin,
and clothing. Keep container tightly closed. Avoid ingestion and
inhalation.
Storage:
Store in a tightly closed container. Store in a cool, dry,
well-ventilated area away from incompatible substances.

**** SECTION 8 - EXPOSURE CONTROLS, PERSONAL PROTECTION ****

Engineering Controls:
Facilities storing or utilizing this material should be equipped
with an eyewash facility and a safety shower. Use adequate
ventilation to keep airborne concentrations low.
Exposure Limits
CAS# 4860-03-1:


Personal Protective Equipment

Eyes:
Wear appropriate protective eyeglasses or chemical
safety goggles as described by OSHA's eye and face
protection regulations in 29 CFR 1910.133 or European
Standard EN166.
Skin:
Wear appropriate protective gloves to prevent skin
exposure.
Clothing:
Wear appropriate protective clothing to prevent skin
exposure.
Respirators:
A respiratory protection program that meets OSHA's 29
CFR 1910.134 and ANSI Z88.2 requirements or European
Standard EN 149 must be followed whenever workplace
conditions warrant respirator use.

**** SECTION 9 - PHYSICAL AND CHEMICAL PROPERTIES ****

Physical State: Liquid
Color: colorless
Odor: None reported.
pH: Not available.
Vapor Pressure: 1.7 hPa @ 140 deg C
Viscosity: 6.1 deg C
Boiling Point: 149 deg C @ 1.00mm Hg
Freezing/Melting Point: 8 deg C
Autoignition Temperature: 220 deg C ( 428.00 deg F)
Flash Point: 136 deg C ( 276.80 deg F)
Explosion Limits, lower: Not available.
Explosion Limits, upper: Not available.
Decomposition Temperature:
Solubility in water: 0.02 G/L (20C)DEC
Specific Gravity/Density: .8650g/cm3
Molecular Formula: C16H33Cl
Molecular Weight: 260.88

**** SECTION 10 - STABILITY AND REACTIVITY ****

Chemical Stability:
Stable at room temperature in closed containers under normal storage
and handling conditions.
Conditions to Avoid:
Incompatible materials, ignition sources, excess heat.
Incompatibilities with Other Materials:
Oxidizing agents.
Hazardous Decomposition Products:
Hydrogen chloride, carbon monoxide, irritating and toxic fumes and
gases, carbon dioxide.
Hazardous Polymerization: Has not been reported.

**** SECTION 11 - TOXICOLOGICAL INFORMATION ****

RTECS#:
CAS# 4860-03-1 unlisted.
LD50/LC50:
Not available.
Carcinogenicity:
1-CHLOROHEXADECANE -
Not listed by ACGIH, IARC, or NTP.

**** SECTION 12 - ECOLOGICAL INFORMATION ****



**** SECTION 13 - DISPOSAL CONSIDERATIONS ****

Dispose of in a manner consistent with federal, state, and local regulations.

**** SECTION 14 - TRANSPORT INFORMATION ****

IATA
Not regulated as a hazardous material.
IMO
Not regulated as a hazardous material.
RID/ADR
Not regulated as a hazardous material.

**** SECTION 15 - REGULATORY INFORMATION ****

European/International Regulations
European Labeling in Accordance with EC Directives
Hazard Symbols: Not available.
Risk Phrases:
Safety Phrases:
S 24/25 Avoid contact with skin and eyes.
S 28A After contact with skin, wash immediately with
plenty of water.
S 37 Wear suitable gloves.
S 45 In case of accident or if you feel unwell, seek
medical advice immediately (show the label where
possible).
WGK (Water Danger/Protection)
CAS# 4860-03-1: 2
Canada
CAS# 4860-03-1 is listed on Canada's NDSL List.
CAS# 4860-03-1 is not listed on Canada's Ingredient Disclosure List.
US FEDERAL
TSCA
CAS# 4860-03-1 is listed on the TSCA inventory.

**** SECTION 16 - ADDITIONAL INFORMATION ****

MSDS Creation Date: 5/11/1999 Revision #2 Date: 3/18/2003

The information above is believed to be accurate and represents the best
information currently available to us. However, we make no warranty of
merchantability or any other warranty, express or implied, with respect to
such information, and we assume no liability resulting from its use. Users
should make their own investigations to determine the suitability of the
information for their particular purposes. In no way shall the company be
liable for any claims, losses, or damages of any third party or for lost
profits or any special, indirect, incidental, consequential or exemplary
damages, howsoever arising, even if the company has been advised of
the possibility of such damages.
--------------------------------------------------------------------------------
--------------------------------------------------------------------------------
Search More   
ALL MSDS PAGES IN THIS GROUP
NAMECAS
O-Benzylbenzyl Alcohol, 97% 1586-00-1
M-Hydroxybenzylhydrazine Dihydrochloride, 98% 81012-99-9
trans-Cinnamaldehyde, p.a. 104-55-2
Zinc fluoride, 99% 7783-49-5
Deuterium Chloride, 20 wt.% Solution in D2O, 100.0 Atom % D 7698-05-7
Acetyl bromide, 98% 506-96-7
Amberlyst ?? A-21 ion-exchange resin 9049-93-8
5,5-Dimethyl-1,3-cyclohexanedione, 99% 126-81-8
2,2-Dichlorooctanal, 85% 50735-74-5
Butyl butyrate, 98% 109-21-7
4-(3-(Trifluoromethyl)phenyl)-4-Piperidinol. 97% 2249-28-7
Fullerene C-70 115383-22-7
4-tert-Butylcalix (4) Arene, 99% (TLC) 60705-62-6
O-Methoxybenzylamine, 98% 6850-57-3
3-Bromo-1-propanol, 92% (GC) 627-18-9
2-Methyl-2-pentanol, 99% 590-36-3
Tartrazine 1934-21-0
Cyclohexylamine Hydrochloride, 99% 4998-76-9
Cyclohexylphenylacetic Acid, 99% 3894-09-5
Oxazolo[4,5-b]pyridin-2(3h)thione 53052-06-5
3-Nitrobenzyl chloride, 99% (titr.) 619-21-6
Coumarin 153, Laser Grade 53518-18-6
Pentene (Techn) 25377-72-4
Antimony(V)-Pentachloride, Anhydrous, 99% 7647-18-9
4-Biphenylcarboxylic acid 99% 92-92-2
Anhydrotetracycline Hydrochloride,"can be used as Secondary 13803-65-1
Tetraethylene Glycol Dimethyl Ether, 99% 143-24-8
1,1-Dimethyl-4-Phenylpiperazinium Iodide, 99% 54-77-3
3-Ethoxymethacrolein, Tech., 95% 42588-57-8
2,6-Diethylaniline, P.A. 579-66-8
3,5-Dimethylanisole, 99% 874-63-5
2-Decalone, Mixture of Cis and Trans, Tech. 4832-17-1
4-Imidazoleacetic Acid Hydrochloride, 99% 3251-69-2
Tris Ortho Xenyl Phosphite, 95% 2752-19-4
Carbobenzyloxyglycine, 98.5% 1138-80-3
(2r,3s)-1-carboxy-4-phenyl-2,3-dihydroxycyclohexa-4,6-diene,potassium
4-(2-Aminoethyl)benzene sulfonamide, 99% 35303-76-5
p-Tolylhydrazine hydrochloride, 98% 637-60-5
3-Cyanopyridine, 98% 100-54-9
Tetrahydro-4H-pyran-4-one, 99% 29943-42-8
Potassium cyclohexanebutyrate, 16.6-18.8% potassium 62638-03-3
5-Cyanoindole, 99% 15861-24-2
Purpurin 81-54-9
Phosphorus(III) iodide, 99+% 13455-01-1
1-Methylindole, 98+% 603-76-9
2,2-Dichloroacetamide, 93% 683-72-7
1-Ethylpiperazine, 98+% 5308-25-8
Tris(hydroxymethyl)aminomethane hemisulfate, 99% 6992-38-7
1-Chlorohexadecane, Ca. 97%(GC) 4860-03-1
3-Methyl-2-pentanol, 99% 565-60-6

Free MSDS Search ( Providing 250,000+ Material Properties )
Chemcas.com| Ads link:todaystock.net