Search   
MSDS 
:
 Lead (IV) Tetra-Acetate (Packed under Glacial Acetic Acid)
CAS 
:
 546-67-8
SYNONYMS 
:
 Acetic acid, lead (+2) salt trihydrate, lead diacetate trihydrate,     plumbous acetate, sugar of lead
**** SECTION 2 - COMPOSITION, INFORMATION ON INGREDIENTS ****

+----------------+--------------------------------------+----------+-----------+
| CAS# | Chemical Name | % | EINECS# |
|----------------|--------------------------------------|----------|-----------|
| 546-67-8 |Lead (iv) acetate | 100 | 208-908-0 |
+----------------+--------------------------------------+----------+-----------+
Hazard Symbols: T C N
Risk Phrases: 20/22 33 34 61 62 50/53

**** SECTION 3 - HAZARDS IDENTIFICATION ****

EMERGENCY OVERVIEW
Harmful by inhalation and if swallowed. Danger of cumulative
effects. Causes burns. May cause harm to the unborn child. Possible
risk of impaired fertility. Very toxic to aquatic organisms, may
cause long-term adverse effects in the aquatic
environment.Corrosive.

Potential Health Effects
Eye:
May result in corneal injury. May cause irreversible eye injury.
Exposure to particulates or solution may cause conjunctivitis,
ulceration, and corneal abnormalities.
Skin:
May cause skin burns.
Ingestion:
Causes gastrointestinal tract burns. May cause severe digestive
tract irritation with abdominal pain, nausea, vomiting and diarrhea.
Inhalation:
Irritation may lead to chemical pneumonitis and pulmonary edema.
Causes severe irritation of upper respiratory tract with coughing,
burns, breathing difficulty, and possible coma.
Chronic:
Chronic inhalation and ingestion may cause effects similar to those
of acute inhalation and ingestion. Prolonged or repeated exposure
may cause adverse reproductive effects. May cause cancer according
to animal studies. Chronic exposure to lead may result in plumbism
which is characterized by lead line in gum, headache, muscle
weakness, mental changes.

**** SECTION 4 - FIRST AID MEASURES ****

Eyes:
Immediately flush eyes with plenty of water for at least 15 minutes,
occasionally lifting the upper and lower eyelids. Get medical aid
immediately.
Skin:
Get medical aid immediately. Flush skin with plenty of water for at
least 15 minutes while removing contaminated clothing and shoes.
Remove contaminated clothing and shoes.
Ingestion:
Do not induce vomiting. If victim is conscious and alert, give 2-4
cupfuls of milk or water. Get medical aid immediately.
Inhalation:
Get medical aid immediately. Remove from exposure and move to fresh
air immediately. If not breathing, give artificial respiration. If
breathing is difficult, give oxygen.
Notes to Physician:
Antidote:
The use of d-Penicillamine as a chelating agent should be determined
by qualified medical personnel. The use of Dimercaprol or BAL
(British Anti-Lewisite) as a chelating agent should be determined by
qualified medical personnel.

**** SECTION 5 - FIRE FIGHTING MEASURES ****

General Information:
As in any fire, wear a self-contained breathing apparatus in
pressure-demand, MSHA/NIOSH (approved or equivalent), and full
protective gear. Flammable Liquid. Can release vapors that form
explosive mixtures at temperatures above the flashpoint.
Extinguishing Media:
For small fires, use dry chemical, carbon dioxide, water spray or
alcohol-resistant foam.

**** SECTION 6 - ACCIDENTAL RELEASE MEASURES ****

General Information: Use proper personal protective equipment as indicated
in Section 8.
Spills/Leaks:
Absorb spill with inert material (e.g. vermiculite, sand or earth),
then place in suitable container. Avoid runoff into storm sewers and
ditches which lead to waterways.

**** SECTION 7 - HANDLING and STORAGE ****

Handling:
Wash thoroughly after handling. Do not get on skin and clothing. Do
not ingest or inhale.
Storage:
Store in a cool, dry place. Keep container closed when not in use.
Material darkens on exposure to air.

**** SECTION 8 - EXPOSURE CONTROLS, PERSONAL PROTECTION ****

Engineering Controls:
Use adequate general or local exhaust ventilation to keep airborne
concentrations below the permissible exposure limits.
Exposure Limits
CAS# 546-67-8:
United Kingdom, WEL - TWA: (listed as lead compounds): 0.15 mg/m3
(as Pb)
United Kingdom, WEL - STEL: (listed as lead compounds): 0.45 mg/m
TWA (as Pb)

France - VME: (listed as lead compounds): 0.1 mg/m3 VME (as Pb)
Germany: (listed as lead compounds): 0.1 mg/m3 VME (as Pb)
Japan: (listed as lead compounds): 0.1 mg/m3 OEL (except alkyl le
compounds, as Pb)

Personal Protective Equipment

Eyes:
Wear chemical splash goggles and face shield.
Skin:
Wear impervious gloves.
Clothing:
Wear appropriate protective clothing to prevent skin
exposure.
Respirators:
A respiratory protection program that meets OSHA's 29
CFR 1910.134 and ANSI Z88.2 requirements or European
Standard EN 149 must be followed whenever workplace
conditions warrant respirator use.

**** SECTION 9 - PHYSICAL AND CHEMICAL PROPERTIES ****

Physical State: Solid
Color: colorless but darkens on exposure to air
Odor: Not available.
pH: Not available.
Vapor Pressure: Not available.
Viscosity: Not available.
Boiling Point: Not available.
Freezing/Melting Point: 175 deg C
Autoignition Temperature: Not available.
Flash Point: Not available.
Explosion Limits, lower: Not available.
Explosion Limits, upper: Not available.
Decomposition Temperature: Not available.
Solubility in water: Hydrolysed by water.
Specific Gravity/Density: Not available.
Molecular Formula: Pb(CH3COO)4
Molecular Weight: 443.2792

**** SECTION 10 - STABILITY AND REACTIVITY ****

Chemical Stability:
Stable.
Conditions to Avoid:
Incompatible materials.
Incompatibilities with Other Materials:
Strong oxidizers, acids, bases.
Hazardous Decomposition Products:
Carbon monoxide, carbon dioxide.
Hazardous Polymerization: Will not occur.

**** SECTION 11 - TOXICOLOGICAL INFORMATION ****

RTECS#:
CAS# 546-67-8: AI5300000
LD50/LC50:
Not available.
Carcinogenicity:
Lead (iv) acetate -
California: carcinogen, initial date 10/1/92 (listed as Lead compounds
NTP: Suspect carcinogen (listed as Lead compounds).
Other:
See actual entry in RTECS for complete information.

**** SECTION 12 - ECOLOGICAL INFORMATION ****

Other
No information available.

**** SECTION 13 - DISPOSAL CONSIDERATIONS ****

Products which are considered hazardous for supply are classified as Special
Waste and the disposal of such chemicals is covered by regulations which may
vary according to location. Contact a specialist disposal company or the local
waste regulator for advice. Empty containers must be decontaminated before
returning for recycling.

**** SECTION 14 - TRANSPORT INFORMATION ****

IATA
Shipping Name: LEAD COMPOUND, SOLUBLE, NOS
Hazard Class: 6.1
UN Number: 2291
Packing Group: III
IMO
Shipping Name: LEAD COMPOUND, SOLUBLE, NOS
Hazard Class: 6.1
UN Number: 2291
Packing Group: III
RID/ADR
Shipping Name: LEAD COMPOUND, SOLUBLE, NOS
Hazard Class: 6.1
UN Number: 2291
Packing group: III

**** SECTION 15 - REGULATORY INFORMATION ****

European/International Regulations
European Labeling in Accordance with EC Directives
Hazard Symbols: T C N
Risk Phrases:
R 61 May cause harm to the unborn child.
R 20/22 Harmful by inhalation and if swallowed.
R 33 Danger of cumulative effects.
R 34 Causes burns.
R 50/53 Very toxic to aquatic organisms, may cause
long-term adverse effects in the aquatic environment.
R 62 Possible risk of impaired fertility.
Safety Phrases:
S 53 Avoid exposure - obtain special instructions
before use.
S 45 In case of accident or if you feel unwell, seek
medical advice immediately (show the label where
possible).
S 60 This material and its container must be
disposed of as hazardous waste.
S 61 Avoid release to the environment. Refer to
special instructions/safety data sheets.
WGK (Water Danger/Protection)
CAS# 546-67-8: No information available.
Canada
CAS# 546-67-8 is listed on Canada's DSL List.
CAS# 546-67-8 is not listed on Canada's Ingredient Disclosure List.
US FEDERAL
TSCA
CAS# 546-67-8 is listed on the TSCA inventory.

**** SECTION 16 - ADDITIONAL INFORMATION ****

MSDS Creation Date: 12/12/1997 Revision #3 Date: 3/18/2003

The information above is believed to be accurate and represents the best
information currently available to us. However, we make no warranty of
merchantability or any other warranty, express or implied, with respect to
such information, and we assume no liability resulting from its use. Users
should make their own investigations to determine the suitability of the
information for their particular purposes. In no way shall the company be
liable for any claims, losses, or damages of any third party or for lost
profits or any special, indirect, incidental, consequential or exemplary
damages, howsoever arising, even if the company has been advised of
the possibility of such damages.
--------------------------------------------------------------------------------
--------------------------------------------------------------------------------
Search More   
ALL MSDS PAGES IN THIS GROUP
NAMECAS
Iodine solution, 1% w/v in potassium iodide 7553-56-2
Mercury Standard Metal Solution 7439-97-6
Anion eluent concentrates (0.00075M-0.003M NaHCO3 / 0.0022M-0.0024M 144-55-8
Manganese Standard metal Solution 7439-96-5
Diaminoethane tetra-acetic acid disodium salt solutions (0.01M / 139-33-3
Aqueous Potassium Hydroxide Solutions 1310-58-3
Manganese standard metal solution in approx. M nitric acid 7439-96-5
Magnesium standard metal solution 1000 ppm in approx. M nitric acid 7439-95-4
Magnesium standard metal solution 10,000 ppm in approx. M nitric acid 7439-95-4
Lithium standard metal solution in approx. M nitric acid 7439-93-2
Iron standard metal solution 10000 ug/g in approx. M nitric acid 7439-89-6
Iron atomic absorption solution 1000 ug/g in approx. M nitric acid 7439-89-6
N,O-Bis(trimethylsilyl)hydroxylamine, 97%
Gold Standard Metal Solution 7647-01-0
Copper standard metal solution 1000 ppm in approx. M nitric acid 7440-50-8
Copper standard metal solution 10,000 ppm in approx. M nitric acid 7440-50-8
Cobalt standard metal solution 1000 ppm in approx. M nitric acid 7440-48-4
Nitric acid solution, 5 - 20% 7697-37-2
Cobalt standard metal solution 10,000 ppm in approx. M nitric acid 7440-48-4
Chromium Standard Metal Solution 1000 PPM 7440-47-3
Chromium Standard Metal Solution 10,000 PPM 7440-47-3
Perchloric acid, 0.1M in acetic acid 64-19-7
Phenol disulfonic acid solution 96-77-5
Boron Standard Metal Solution 7697-32-7
Calcium standard metal solution in approx. M nitric acid 7440-70-2
D (+) Melibiose Monohydrate 66009-10-7
N-Methyl-bis-trifluoroacetamide 685-27-8
N-Heptadecanoic Acid 506-12-7
Barium chloride solution, 1M 7732-18-5
Bicarbonate indicator solution 76-61-9
Ammonia-Ammonium Chloride Buffer Solution 7664-41-7
2,4,6-Trichlorophenylhydrazine, 98% (Titr.) 5329-12-4
Cadmium standard metal solution 1000 ppm 7440-43-9
Cadmium standard metal solution 10,000 ppm in approx. M nitric acid 7440-43-9
(5S)-5,6-Isopropylidenedioxy-6-Methyl-Heptan-2-One, 99% 61262-94-0
Barium standard metal solution in nitric acid 7440-39-3
Arsenic Standard Metal Solution 1327-53-3
Antimony Standard Metal Solution 7647-01-0
Aluminium standard metal solution 1000 ppm in nitric acid 7429-90-5
N-Methyl-N-(trimethylsilyl)trifluoroacetamide, 97% 24589-78-4
Aluminium standard metal solution 10,000 ppm in nitric acid 7429-90-5
Lead (IV) Tetra-Acetate (Packed under Glacial Acetic Acid) 546-67-8
Sulfuric Acid Volumetric Solution 7664-93-9
Sulfuric acid volumetric solutions 0.1M 7664-93-9
Sulfuric Acid Volumetric Solutions 0.05 M 7664-93-9
Ficodox COD Reagent 7664-93-9
Potassium Pyrogallate Solution 87-66-1
Silver Nitrate Solution 0.1M 7732-18-5
tert-Butyl carbazate, 97% 870-46-2
Orotic acid hydrate, 98% 50887-69-9

Free MSDS Search ( Providing 250,000+ Material Properties )
Chemcas.com| Ads link:todaystock.net