Search   
MSDS 
:
 Perchloric acid, 0.1M in acetic acid
CAS 
:
 64-19-7
SYNONYMS 
:
 None.
**** SECTION 2 - COMPOSITION, INFORMATION ON INGREDIENTS ****

+----------------+--------------------------------------+----------+-----------+
| CAS# | Chemical Name | % | EINECS# |
|----------------|--------------------------------------|----------|-----------|
|----------------|--------------------------------------|----------|-----------|
| 64-19-7 |Acetic acid | 99 | 200-580-7 |
|----------------|--------------------------------------|----------|-----------|
| 7601-90-3 |Perchloric acid | 1 | 231-512-4 |
+----------------+--------------------------------------+----------+-----------+
Text for R-phrases: see Section 16
Hazard Symbols: C
Risk Phrases: 10 35

**** SECTION 3 - HAZARDS IDENTIFICATION ****

EMERGENCY OVERVIEW
Flammable. Causes severe burns.Corrosive.

Potential Health Effects
Eye:
Causes severe eye irritation. Contact with liquid or vapor causes
severe burns and possible irreversible eye damage.
Skin:
Causes skin burns. May be harmful if absorbed through the skin.
Contact with the skin may cause blackening and hyperkeratosis of the
skin of the hands.
Ingestion:
May cause severe and permanent damage to the digestive tract. Causes
severe pain, nausea, vomiting, diarrhea, and shock. May cause
polyuria, oliguria (excretion of a diminished amount of urine in
relation to the fluid intake) and anuria (complete suppression of
urination). Rapidly absorbed from the gastrointestinal tract.
Inhalation:
Effects may be delayed. Causes chemical burns to the respiratory
tract. Exposure may lead to bronchitis, pharyngitis, and dental
erosion. May be absorbed through the lungs.
Chronic:
Chronic exposure to acetic acid may cause erosion of dental enamel,
bronchitis, eye irritation, darkening of the skin, and chronic
inflammation of the respiratory tract. Acetic acid can cause
occupational asthma. One case of a delayed asthmatic response to
glacial acetic acid has been reported in a person with bronchial
asthma. Skin sensitization to acetic acid is rare, but has occurred.

**** SECTION 4 - FIRST AID MEASURES ****

Eyes:
In case of contact, immediately flush eyes with plenty of water for
at least 15 minutes. Get medical aid immediately.
Skin:
In case of contact, immediately flush skin with plenty of water for
at least 15 minutes while removing contaminated clothing and shoes.
Get medical aid immediately. Wash clothing before reuse.
Ingestion:
If swallowed, do NOT induce vomiting. Get medical aid immediately.
If victim is fully conscious, give a cupful of water. Never give
anything by mouth to an unconscious person.
Inhalation:
If inhaled, remove to fresh air. If not breathing, give artificial
respiration. If breathing is difficult, give oxygen. Get medical aid.
Notes to Physician:
Persons with pre-existing skin disorders or impaired respiratory or
pulmonary function may be at increased risk to the effects of this
substance. Treat symptomatically and supportively.

**** SECTION 5 - FIRE FIGHTING MEASURES ****

General Information:
Use water spray to keep fire-exposed containers cool. Wear
appropriate protective clothing to prevent contact with skin and
eyes. Wear a self-contained breathing apparatus (SCBA) to prevent
contact with thermal decomposition products. Reacts with most metals
to form highly flammable hydrogen gas which can form explosive
mixtures with air. Flammable liquid and vapor. Vapors are heavier
than air and may travel to a source of ignition and flash back.
Vapors can spread along the ground and collect in low or confined
areas.
Extinguishing Media:
For small fires, use dry chemical, carbon dioxide, water spray or
alcohol-resistant foam. Use water spray to cool fire-exposed
containers. For large fires, use water spray, fog or
alcohol-resistant foam.

**** SECTION 6 - ACCIDENTAL RELEASE MEASURES ****

General Information: Use proper personal protective equipment as indicated
in Section 8.
Spills/Leaks:
Use water spray to dilute spill to a non-flammable mixture. Avoid
runoff into storm sewers and ditches which lead to waterways. Wash
area with soap and water. Use water spray to disperse the gas/vapor.
Remove all sources of ignition. Use a spark-proof tool. Provide
ventilation. Cover with material such as dry soda ash or calcium
carbonate and place into a closed container for disposal. A vapor
suppressing foam may be used to reduce vapors. U.S. regulations
require reporting spills and releases to soil, water and air in
excess of reportable quantities.

**** SECTION 7 - HANDLING and STORAGE ****

Handling:
Wash thoroughly after handling. Remove contaminated clothing and
wash before reuse. Do not get in eyes, on skin, or on clothing. Empty
containers retain product residue, (liquid and/or vapor), and can be
dangerous. Avoid contact with heat, sparks and flame. Do not ingest
or inhale. Discard contaminated shoes. Do not pressurize, cut, weld,
braze, solder, drill, grind, or expose empty containers to heat,
sparks or open flames. Use only with adequate ventilation.
Storage:
Keep away from heat, sparks, and flame. Keep from freezing. Keep
from contact with oxidizing materials. Store in a cool, dry,
well-ventilated area away from incompatible substances. Do not store
near alkaline substances. Acetic acid should be kept above its
freezing point of 62F(17C) to allow it to be handled as a liquid.
It will contract slightly on freezing. Freezing and thawing does not
affect product quality.

**** SECTION 8 - EXPOSURE CONTROLS, PERSONAL PROTECTION ****

Engineering Controls:
Facilities storing or utilizing this material should be equipped
with an eyewash facility and a safety shower. Use adequate general or
local exhaust ventilation to keep airborne concentrations below the
permissible exposure limits.
Personal Protective Equipment

Eyes:
Wear chemical goggles.
Skin:
Wear appropriate gloves to prevent skin exposure.
Clothing:
Wear appropriate protective clothing to prevent skin
exposure.
Respirators:
A respiratory protection program that meets OSHA's 29
CFR 1910.134 and ANSI Z88.2 requirements or European
Standard EN 149 must be followed whenever workplace
conditions warrant a respirator's use.

**** SECTION 9 - PHYSICAL AND CHEMICAL PROPERTIES ****

Physical State: Liquid
Color: colorless
Odor: pungent odor - vinegar odor
pH: 2.4 (1M), 2.9 (0.1M)
Vapor Pressure: 11 mm Hg @ 20 deg C
Viscosity: 1.22 cP
Boiling Point: 117-118 deg C
Freezing/Melting Point: 16.6 deg C
Autoignition Temperature: 426 deg C ( 798.80 deg F)
Flash Point: 39 deg C ( 102.20 deg F)
Explosion Limits, lower: 4.0 vol %
Explosion Limits, upper: 19.9 vol %
Decomposition Temperature: Not available.
Solubility in water: Soluble.
Specific Gravity/Density: 1.05 (Water=1)
Molecular Formula: Mixture
Molecular Weight: Not applicable

**** SECTION 10 - STABILITY AND REACTIVITY ****

Chemical Stability:
Stable at room temperature in closed containers under normal storage
and handling conditions. Acetic acid and perchloric acid are
incompatible in some combinations. Mixtures may have varying degrees
of sensitivity to shock. Explosions involving acetic acid and
perchloric acid have occurred in electrolytic polishing baths.
Conditions to Avoid:
Ignition sources, excess heat, freezing temperatures.
Incompatibilities with Other Materials:
Metals, strong oxidizing agents, strong bases, nitric acid,
peroxides, chromic acid.
Hazardous Decomposition Products:
Hydrogen chloride, carbon monoxide, irritating and toxic fumes and
gases, carbon dioxide.
Hazardous Polymerization: Will not occur.

**** SECTION 11 - TOXICOLOGICAL INFORMATION ****

RTECS#:
CAS# 64-19-7: AF1225000
CAS# 7601-90-3: SC7500000
LD50/LC50:
CAS# 64-19-7: Draize test, rabbit, skin: 50 mg/24H Mild; Inhalation,
mouse: LC50 = 5620 ppm/1H; Oral, rat: LD50 = 3310 mg/kg; Skin,
rabbit: LD50 = 1060 uL/kg.
CAS# 7601-90-3: Oral, rat: LD50 = 1100 mg/kg.
Carcinogenicity:
Acetic acid -
Not listed by ACGIH, IARC, NIOSH, NTP, or OSHA.
Perchloric acid -
Not listed by ACGIH, IARC, NIOSH, NTP, or OSHA.
Other:
See actual entry in RTECS for complete information.

**** SECTION 12 - ECOLOGICAL INFORMATION ****

Ecotoxicity:
Fish: Fathead Minnow: LC50 = 88 mg/L; 96 Hr; Static bioassay @
18-22CFish: Bluegill/Sunfish: LC50 = 75 mg/L; 96 Hr;
UnspecifiedFish: Goldfish: LC50 = 423 mg/L; 24 Hr; UnspecifiedWater
flea Daphnia: EC50 = 32-47 mg/L; 24-48 Hr; UnspecifiedBacteria:
Phytobacterium phosphoreum: EC50 = 8.86-11 mg/L; 5,15,25 min;
Microtox testIf released to water or soil, acetic acid will
biodegrade readily. Evaporation from dry surfaces is likely to
occur. When spilled on soil, the liquid will spread on the surface
and penetrate into the soil at a rate dependent on the soil type and
its water content. Acetic acid shows no potential for biological

**** SECTION 13 - DISPOSAL CONSIDERATIONS ****

Products which are considered hazardous for supply are classified as Special
Waste and the disposal of such chemicals is covered by regulations which may
vary according to location. Contact a specialist disposal company or the local
waste regulator for advice. Empty containers must be decontaminated before
returning for recycling.

**** SECTION 14 - TRANSPORT INFORMATION ****

IATA
Shipping Name: Corrosive Liquid, Flammable, N.O.S.
Hazard Class: 8
UN Number: 2920
Packing Group: II
IMO
Shipping Name: Corrosive Liquid, Flammable, N.O.S.
Hazard Class: 8
UN Number: 2920
Packing Group: II
RID/ADR
Shipping Name: Corrosive Liquid, Flammable, N.O.S.
Hazard Class: 8
UN Number: 2920
Packing group:

**** SECTION 15 - REGULATORY INFORMATION ****

European/International Regulations
European Labeling in Accordance with EC Directives
Hazard Symbols: C
Risk Phrases:
R 10 Flammable.
R 35 Causes severe burns.
Safety Phrases:
S 23 Do not inhale gas/fumes/vapour/spray.
S 26 In case of contact with eyes, rinse immediately
with plenty of water and seek medical advice.
S 45 In case of accident or if you feel unwell, seek
medical advice immediately (show the label where
possible).
WGK (Water Danger/Protection)
CAS# 64-19-7: 1
CAS# 7601-90-3: 1
United Kingdom Occupational Exposure Limits

United Kingdom Maximum Exposure Limits

Canada
None of the chemicals in this product are listed on the DSL/NDSL list.
CAS# 64-19-7 is not listed on Canada's Ingredient Disclosure List.
CAS# 7601-90-3 is not listed on Canada's Ingredient Disclosure List.
Exposure Limits
CAS# 64-19-7: OEL-AUSTRALIA:TWA 10 ppm (25 mg/m3);STEL 15 ppm (37 mg/m
3)
OEL-AUSTRIA:TWA 10 ppm (25 mg/m3)
OEL-BELGIUM:TWA 10 ppm (25 mg/m3);STEL 15 ppm (37 mg/m3)
OEL-CZECHOSLOVAKIA:TWA 25 mg/m3;STEL 50 mg/m3
OEL-DENMARK:TWA 10 ppm (25 mg/m3)
OEL-FINLAND:TWA 10 ppm (25 mg/m3);STEL 15 ppm (37 mg/m3);Skin
OEL-FRANCE:STEL 10 ppm (25 mg/m3)
OEL-GERMANY:TWA 10 ppm (25 mg/m3)
OEL-HUNGARY:TWA 10 mg/m3;STEL 20 mg/m3
OEL-INDIA:TWA 10 ppm (25 mg/m3);STEL 15 ppm (37 mg/m3)
OEL-JAPAN:TWA 10 ppm (25 mg/m3)
OEL-THE NETHERLANDS:TWA 10 ppm (25 mg/m3)
OEL-THE PHILIPPINES:TWA 10 ppm (25 mg/m3)
OEL-POLAND:TWA 5 mg/m3
OEL-RUSSIA:TWA 10 ppm;STEL 5 mg/m3;Skin
OEL-SWEDEN:TWA 10 ppm (25 mg/m3);STEL 15 ppm (35 mg/m3)
OEL-SWITZERLAND:TWA 10 ppm (25 mg/m3);STEL 20 ppm (50 mg/m3)
OEL-THAILAND:TWA 10 ppm (25 mg/m3)
OEL-TURKEY:TWA 10 ppm (25 mg/m3)
OEL-UNITED KINGDOM:TWA 10 ppm (25 mg/m3);STEL 15 ppm (35 mg/m3)
OEL IN BULGARIA, COLOMBIA, JORDAN, KOREA check ACGIH TLV
OEL IN NEW ZEALAND, SINGAPORE, VIETNAM check ACGI TLV
CAS# 7601-90-3: OEL-CZECHOSLOVAKIA:TWA 1 mg/m3;STEL 2 mg/m3
US FEDERAL
TSCA
CAS# 64-19-7 is not listed on the TSCA inventory.
It is for research and development use only.
CAS# 7601-90-3 is not listed on the TSCA inventory.
It is for research and development use only.

**** SECTION 16 - ADDITIONAL INFORMATION ****

MSDS Creation Date: 4/07/1999 Revision #6 Date: 3/04/2004

The information above is believed to be accurate and represents the best
information currently available to us. However, we make no warranty of
merchantability or any other warranty, express or implied, with respect to
such information, and we assume no liability resulting from its use. Users
should make their own investigations to determine the suitability of the
information for their particular purposes. In no way shall the company be
liable for any claims, losses, or damages of any third party or for lost
profits or any special, indirect, incidental, consequential or exemplary
damages, howsoever arising, even if the company has been advised of
the possibility of such damages.
--------------------------------------------------------------------------------
--------------------------------------------------------------------------------
Search More   
ALL MSDS PAGES IN THIS GROUP
NAMECAS
Iodine solution, 1% w/v in potassium iodide 7553-56-2
Mercury Standard Metal Solution 7439-97-6
Anion eluent concentrates (0.00075M-0.003M NaHCO3 / 0.0022M-0.0024M 144-55-8
Manganese Standard metal Solution 7439-96-5
Diaminoethane tetra-acetic acid disodium salt solutions (0.01M / 139-33-3
Aqueous Potassium Hydroxide Solutions 1310-58-3
Manganese standard metal solution in approx. M nitric acid 7439-96-5
Magnesium standard metal solution 1000 ppm in approx. M nitric acid 7439-95-4
Magnesium standard metal solution 10,000 ppm in approx. M nitric acid 7439-95-4
Lithium standard metal solution in approx. M nitric acid 7439-93-2
Iron standard metal solution 10000 ug/g in approx. M nitric acid 7439-89-6
Iron atomic absorption solution 1000 ug/g in approx. M nitric acid 7439-89-6
N,O-Bis(trimethylsilyl)hydroxylamine, 97%
Gold Standard Metal Solution 7647-01-0
Copper standard metal solution 1000 ppm in approx. M nitric acid 7440-50-8
Copper standard metal solution 10,000 ppm in approx. M nitric acid 7440-50-8
Cobalt standard metal solution 1000 ppm in approx. M nitric acid 7440-48-4
Nitric acid solution, 5 - 20% 7697-37-2
Cobalt standard metal solution 10,000 ppm in approx. M nitric acid 7440-48-4
Chromium Standard Metal Solution 1000 PPM 7440-47-3
Chromium Standard Metal Solution 10,000 PPM 7440-47-3
Perchloric acid, 0.1M in acetic acid 64-19-7
Phenol disulfonic acid solution 96-77-5
Boron Standard Metal Solution 7697-32-7
Calcium standard metal solution in approx. M nitric acid 7440-70-2
D (+) Melibiose Monohydrate 66009-10-7
N-Methyl-bis-trifluoroacetamide 685-27-8
N-Heptadecanoic Acid 506-12-7
Barium chloride solution, 1M 7732-18-5
Bicarbonate indicator solution 76-61-9
Ammonia-Ammonium Chloride Buffer Solution 7664-41-7
2,4,6-Trichlorophenylhydrazine, 98% (Titr.) 5329-12-4
Cadmium standard metal solution 1000 ppm 7440-43-9
Cadmium standard metal solution 10,000 ppm in approx. M nitric acid 7440-43-9
(5S)-5,6-Isopropylidenedioxy-6-Methyl-Heptan-2-One, 99% 61262-94-0
Barium standard metal solution in nitric acid 7440-39-3
Arsenic Standard Metal Solution 1327-53-3
Antimony Standard Metal Solution 7647-01-0
Aluminium standard metal solution 1000 ppm in nitric acid 7429-90-5
N-Methyl-N-(trimethylsilyl)trifluoroacetamide, 97% 24589-78-4
Aluminium standard metal solution 10,000 ppm in nitric acid 7429-90-5
Lead (IV) Tetra-Acetate (Packed under Glacial Acetic Acid) 546-67-8
Sulfuric Acid Volumetric Solution 7664-93-9
Sulfuric acid volumetric solutions 0.1M 7664-93-9
Sulfuric Acid Volumetric Solutions 0.05 M 7664-93-9
Ficodox COD Reagent 7664-93-9
Potassium Pyrogallate Solution 87-66-1
Silver Nitrate Solution 0.1M 7732-18-5
tert-Butyl carbazate, 97% 870-46-2
Orotic acid hydrate, 98% 50887-69-9

Free MSDS Search ( Providing 250,000+ Material Properties )
Chemcas.com| Ads link:todaystock.net