Search   
MSDS 
:
 Antimony Standard Metal Solution
CAS 
:
 7647-01-0
SYNONYMS 
:
 None
**** SECTION 2 - COMPOSITION, INFORMATION ON INGREDIENTS ****

+----------------+--------------------------------------+----------+-----------+
| CAS# | Chemical Name | % | EINECS# |
|----------------|--------------------------------------|----------|-----------|
|----------------|--------------------------------------|----------|-----------|
| 7647-01-0 |Hydrogen chloride | <10.0 | 231-595-7 |
|----------------|--------------------------------------|----------|-----------|
| 7732-18-5 |Water | Balance | 231-791-2 |
|----------------|--------------------------------------|----------|-----------|
| 10025-91-9 |Antimony trichloride | <1.0 | 233-047-2 |
+----------------+--------------------------------------+----------+-----------+
Text for R-phrases: see Section 16
Hazard Symbols: XN N
Risk Phrases: 20/22 51/53

**** SECTION 3 - HAZARDS IDENTIFICATION ****

EMERGENCY OVERVIEW
Harmful by inhalation and if swallowed. Toxic to aquatic organisms,
may cause long-term adverse effects in the aquatic
environment.Corrosive.

Potential Health Effects
Eye:
May cause severe eye irritation. May result in corneal injury.
Skin:
Exposure may cause irritation and possible burns.
Ingestion:
May cause severe gastrointestinal tract irritation with nausea,
vomiting and possible burns.
Inhalation:
May cause severe irritation of the upper respiratory tract with
pain, burns, and inflammation. May cause pulmonary edema and severe
respiratory disturbances.
Chronic:
Prolonged or repeated skin contact may cause dermatitis. Repeated
exposure may cause erosion of teeth.

**** SECTION 4 - FIRST AID MEASURES ****

Eyes:
Immediately flush eyes with plenty of water for at least 15 minutes,
occasionally lifting the upper and lower eyelids. Get medical aid
immediately.
Skin:
Get medical aid immediately. Immediately flush skin with plenty of
water for at least 15 minutes while removing contaminated clothing
and shoes.
Ingestion:
Do not induce vomiting. If victim is conscious and alert, give 2-4
cupfuls of milk or water. Never give anything by mouth to an
unconscious person. Get medical aid immediately.
Inhalation:
Get medical aid immediately. Remove from exposure and move to fresh
air immediately. If not breathing, give artificial respiration. If
breathing is difficult, give oxygen.
Notes to Physician:

**** SECTION 5 - FIRE FIGHTING MEASURES ****

General Information:
Wear appropriate protective clothing to prevent contact with skin
and eyes. Wear a self-contained breathing apparatus (SCBA) to
prevent contact with thermal decomposition products.
Extinguishing Media:
For small fires, use dry chemical, carbon dioxide, water spray or
alcohol-resistant foam.

**** SECTION 6 - ACCIDENTAL RELEASE MEASURES ****

General Information: Use proper personal protective equipment as indicated
in Section 8.
Spills/Leaks:
Absorb spill with inert material (e.g. vermiculite, sand or earth),
then place in suitable container.

**** SECTION 7 - HANDLING and STORAGE ****

Handling:
Wash thoroughly after handling. Remove contaminated clothing and
wash before reuse. Use with adequate ventilation. Do not get in eyes,
on skin, or on clothing. Do not get on skin or in eyes.
Storage:
Store in a tightly closed container. Keep from contact with
oxidizing materials. Store in a cool, dry, well-ventilated area away
from incompatible substances.

**** SECTION 8 - EXPOSURE CONTROLS, PERSONAL PROTECTION ****

Engineering Controls:
Use adequate general or local exhaust ventilation to keep airborne
concentrations below the permissible exposure limits.
Exposure Limits
CAS# 7647-01-0:
United Kingdom, WEL - TWA: 1 ppm TWA (aerosol mist and gas); 2 mg
TWA (aerosol mist and gas)
United Kingdom, WEL - STEL: 5 ppm STEL (aerosol mist and gas); 8
mg/m3 STEL (aerosol mist and gas)
United States OSHA: ; 5 ppm Ceiling; 7 mg/m3 Ceiling
Belgium - TWA: 5 ppm VLE; 8 mg/m3 VLE
Belgium - STEL: 10 ppm VLE; 15 mg/m3 VLE
France - VLE: 5 ppm VLE; 7.5 mg/m3 VLE
Germany: 8 mg/m3 TWA
Japan: 5 ppm Ceiling; 7.5 mg/m3 Ceiling
Malaysia: 5 ppm Ceiling; 7.5 mg/m3 Ceiling
Netherlands: 10 ppm STEL; 15 mg/m3 STEL
Netherlands: 5 ppm MAC; 8 mg/m3 MAC
Russia: 5 mg/m3 TWA
Spain: 5 ppm VLA-ED; 7.6 mg/m3 VLA-ED
Spain: 10 ppm VLA-EC; 15 mg/m3 VLA-EC
CAS# 7732-18-5:

CAS# 10025-91-9:
United Kingdom, WEL - TWA: (listed as antimony compounds): 0.5 mg
TWA (except stibine, as Sb)
United Kingdom, WEL - STEL: (listed as antimony compounds): 1.5 m
STEL (except stibine, as Sb)
United States OSHA: 0.5 mg/m3 TWA (listed under Antimony).0.5 mg
TWA (as Sb) (listed under Antimony compounds).
Belgium - TWA: (listed as antimony compounds): 0.5 mg/m3 VLE (as
France - VME: (listed as antimony compounds): 0.5 mg/m3 VME (as S
Germany: (listed as antimony compounds): 0.5 mg/m3 VME (as Sb)
Japan: (listed as antimony compounds): 0.1 mg/m3 OEL (except stib
as Sb)
Malaysia: (listed as antimony compounds): 0.5 mg/m3 TWA (as Sb)
Netherlands: (listed as antimony compounds): 0.5 mg/m3 MAC (as Sb
Russia: 0.3 mg/m3 TWA
Russia: (listed as antimony): 0.2 mg/m3 STEL
Spain: (listed as antimony compounds): 0.5 mg/m3 VLA-ED (except
antimony hydride, as Sb)

Personal Protective Equipment

Eyes:
Wear appropriate protective eyeglasses or chemical
safety goggles as described by OSHA's eye and face
protection regulations in 29 CFR 1910.133 or European
Standard EN166.
Skin:
Wear appropriate gloves to prevent skin exposure.
Clothing:
Wear appropriate protective clothing to prevent skin
exposure.
Respirators:
Follow the OSHA respirator regulations found in 29
CFR 1910.134 or European Standard EN 149. Use a
NIOSH/MSHA or European Standard EN 149 approved
respirator if exposure limits are exceeded or if
irritation or other symptoms are experienced.

**** SECTION 9 - PHYSICAL AND CHEMICAL PROPERTIES ****

Physical State: Liquid
Color: colorless
Odor: Not available.
pH: Acidic
Vapor Pressure: Not available.
Viscosity: Not available.
Boiling Point: Not available.
Freezing/Melting Point: Not available.
Autoignition Temperature: Not applicable.
Flash Point: Not applicable.
Explosion Limits, lower: Not available.
Explosion Limits, upper: Not available.
Decomposition Temperature:
Solubility in water: Soluble in water.
Specific Gravity/Density: 1.02
Molecular Formula: Solution
Molecular Weight: 0

**** SECTION 10 - STABILITY AND REACTIVITY ****

Chemical Stability:
Stable.
Conditions to Avoid:
Incompatible materials.
Incompatibilities with Other Materials:
Antimnony is incompatible with aluminum, potassium and sodium.
Hydrochloric acid is incompatible with calcium carbide, cesium
acetylene, carbide, cesium carbide, dowicil 100, lithium silicide,
magnesium boride, mercuric sulfate, rubidium acetylene carbide,
rubidium carbide, and sodium.
Hazardous Decomposition Products:
Hydrogen chloride, hydrogen gas.
Hazardous Polymerization: Has not been reported.

**** SECTION 11 - TOXICOLOGICAL INFORMATION ****

RTECS#:
CAS# 7647-01-0: MW4025000 MW4031000
CAS# 7732-18-5: ZC0110000
CAS# 10025-91-9: CC4900000
LD50/LC50:
CAS# 7647-01-0: Inhalation, mouse: LC50 = 1108 ppm/1H; Inhalation,
mouse: LC50 = 20487 mg/m3/5M; Inhalation, mouse: LC50 = 3940
mg/m3/30M; Inhalation, mouse: LC50 = 8300 mg/m3/30M; Inhalation,
rat: LC50 = 3124 ppm/1H; Inhalation, rat: LC50 = 60938 mg/m3/5M;
Inhalation, rat: LC50 = 7004 mg/m3/30M; Inhalation, rat: LC50 =
45000 mg/m3/5M; Inhalation, rat: LC50 = 8300 mg/m3/30M; Oral,
rabbit: LD50 = 900 mg/kg.
CAS# 7732-18-5: Oral, rat: LD50 = >90 mL/kg.
CAS# 10025-91-9: Oral, rat: LD50 = 525 mg/kg.
Carcinogenicity:
Hydrogen chloride -
Not listed by ACGIH, IARC, or NTP.
Water -
Not listed by ACGIH, IARC, or NTP.
Antimony trichloride -
Not listed by ACGIH, IARC, or NTP.
Other:
See actual entry in RTECS for complete information.

**** SECTION 12 - ECOLOGICAL INFORMATION ****



**** SECTION 13 - DISPOSAL CONSIDERATIONS ****

Products which are considered hazardous for supply are classified as Special
Waste and the disposal of such chemicals is covered by regulations which may
vary according to location. Contact a specialist disposal company or the local
waste regulator for advice. Empty containers must be decontaminated before
returning for recycling.

**** SECTION 14 - TRANSPORT INFORMATION ****

IATA
Shipping Name: ANTIMONY COMPOUND, INORGANIC, LIQUID, NOS
Hazard Class: 6.1
UN Number: 3141
Packing Group: III
IMO
Shipping Name: ANTIMONY COMPOUND, INORGANIC, LIQUID, NOS
Hazard Class: 6.1
UN Number: 3141
Packing Group: III
RID/ADR
Shipping Name: ANTIMONY COMPOUND, INORGANIC, LIQUID, NOS
Hazard Class: 6.1
UN Number: 3141
Packing group: III
USA RQ: CAS# 7647-01-0: 5000 lb final RQ; 2270 kg final RQ
USA RQ: CAS# 10025-91-9: 1000 lb final RQ; 454 kg final RQ

**** SECTION 15 - REGULATORY INFORMATION ****

European/International Regulations
European Labeling in Accordance with EC Directives
Hazard Symbols: XN N
Risk Phrases:
R 20/22 Harmful by inhalation and if swallowed.
R 51/53 Toxic to aquatic organisms, may cause
long-term adverse effects in the aquatic environment.
Safety Phrases:
S 61 Avoid release to the environment. Refer to
special instructions/safety data sheets.
WGK (Water Danger/Protection)
CAS# 7647-01-0: 1
CAS# 7732-18-5: No information available.
CAS# 10025-91-9: 2
Canada
CAS# 7647-01-0 is listed on Canada's DSL List.
CAS# 7732-18-5 is listed on Canada's DSL List.
CAS# 10025-91-9 is listed on Canada's DSL List.
CAS# 7647-01-0 is listed on Canada's Ingredient Disclosure List.
CAS# 7732-18-5 is not listed on Canada's Ingredient Disclosure List.
CAS# 10025-91-9 is listed on Canada's Ingredient Disclosure List.
US FEDERAL
TSCA
CAS# 7647-01-0 is listed on the TSCA inventory.
CAS# 7732-18-5 is listed on the TSCA inventory.
CAS# 10025-91-9 is listed on the TSCA inventory.

**** SECTION 16 - ADDITIONAL INFORMATION ****

Text for R-phrases from Section 2
R 36/37/38 Irritating to eyes, respiratory system and
skin.
MSDS Creation Date: 12/12/1997 Revision #5 Date: 3/18/2003

The information above is believed to be accurate and represents the best
information currently available to us. However, we make no warranty of
merchantability or any other warranty, express or implied, with respect to
such information, and we assume no liability resulting from its use. Users
should make their own investigations to determine the suitability of the
information for their particular purposes. In no way shall the company be
liable for any claims, losses, or damages of any third party or for lost
profits or any special, indirect, incidental, consequential or exemplary
damages, howsoever arising, even if the company has been advised of
the possibility of such damages.
--------------------------------------------------------------------------------
--------------------------------------------------------------------------------
Search More   
ALL MSDS PAGES IN THIS GROUP
NAMECAS
Iodine solution, 1% w/v in potassium iodide 7553-56-2
Mercury Standard Metal Solution 7439-97-6
Anion eluent concentrates (0.00075M-0.003M NaHCO3 / 0.0022M-0.0024M 144-55-8
Manganese Standard metal Solution 7439-96-5
Diaminoethane tetra-acetic acid disodium salt solutions (0.01M / 139-33-3
Aqueous Potassium Hydroxide Solutions 1310-58-3
Manganese standard metal solution in approx. M nitric acid 7439-96-5
Magnesium standard metal solution 1000 ppm in approx. M nitric acid 7439-95-4
Magnesium standard metal solution 10,000 ppm in approx. M nitric acid 7439-95-4
Lithium standard metal solution in approx. M nitric acid 7439-93-2
Iron standard metal solution 10000 ug/g in approx. M nitric acid 7439-89-6
Iron atomic absorption solution 1000 ug/g in approx. M nitric acid 7439-89-6
N,O-Bis(trimethylsilyl)hydroxylamine, 97%
Gold Standard Metal Solution 7647-01-0
Copper standard metal solution 1000 ppm in approx. M nitric acid 7440-50-8
Copper standard metal solution 10,000 ppm in approx. M nitric acid 7440-50-8
Cobalt standard metal solution 1000 ppm in approx. M nitric acid 7440-48-4
Nitric acid solution, 5 - 20% 7697-37-2
Cobalt standard metal solution 10,000 ppm in approx. M nitric acid 7440-48-4
Chromium Standard Metal Solution 1000 PPM 7440-47-3
Chromium Standard Metal Solution 10,000 PPM 7440-47-3
Perchloric acid, 0.1M in acetic acid 64-19-7
Phenol disulfonic acid solution 96-77-5
Boron Standard Metal Solution 7697-32-7
Calcium standard metal solution in approx. M nitric acid 7440-70-2
D (+) Melibiose Monohydrate 66009-10-7
N-Methyl-bis-trifluoroacetamide 685-27-8
N-Heptadecanoic Acid 506-12-7
Barium chloride solution, 1M 7732-18-5
Bicarbonate indicator solution 76-61-9
Ammonia-Ammonium Chloride Buffer Solution 7664-41-7
2,4,6-Trichlorophenylhydrazine, 98% (Titr.) 5329-12-4
Cadmium standard metal solution 1000 ppm 7440-43-9
Cadmium standard metal solution 10,000 ppm in approx. M nitric acid 7440-43-9
(5S)-5,6-Isopropylidenedioxy-6-Methyl-Heptan-2-One, 99% 61262-94-0
Barium standard metal solution in nitric acid 7440-39-3
Arsenic Standard Metal Solution 1327-53-3
Antimony Standard Metal Solution 7647-01-0
Aluminium standard metal solution 1000 ppm in nitric acid 7429-90-5
N-Methyl-N-(trimethylsilyl)trifluoroacetamide, 97% 24589-78-4
Aluminium standard metal solution 10,000 ppm in nitric acid 7429-90-5
Lead (IV) Tetra-Acetate (Packed under Glacial Acetic Acid) 546-67-8
Sulfuric Acid Volumetric Solution 7664-93-9
Sulfuric acid volumetric solutions 0.1M 7664-93-9
Sulfuric Acid Volumetric Solutions 0.05 M 7664-93-9
Ficodox COD Reagent 7664-93-9
Potassium Pyrogallate Solution 87-66-1
Silver Nitrate Solution 0.1M 7732-18-5
tert-Butyl carbazate, 97% 870-46-2
Orotic acid hydrate, 98% 50887-69-9

Free MSDS Search ( Providing 250,000+ Material Properties )
Chemcas.com| Ads link:todaystock.net