Search   
MSDS 
:
 (Ethylthio)trimethylsilane, tech., 90%
CAS 
:
 5573-62-6
SYNONYMS 
:
 None Known.
**** SECTION 2 - COMPOSITION, INFORMATION ON INGREDIENTS ****

+----------------+--------------------------------------+----------+-----------+
| CAS# | Chemical Name | % | EINECS# |
|----------------|--------------------------------------|----------|-----------|
| 5573-62-6 |(Ethylthio)trimethylsilane | 90 | unlisted |
+----------------+--------------------------------------+----------+-----------+
Hazard Symbols: F
Risk Phrases: 11

**** SECTION 3 - HAZARDS IDENTIFICATION ****

EMERGENCY OVERVIEW
Highly flammable.

Potential Health Effects
Eye:
May cause eye irritation. May cause chemical conjunctivitis and
corneal damage.
Skin:
May cause skin irritation. May cause cyanosis of the extremities.
Ingestion:
May cause gastrointestinal irritation with nausea, vomiting and
diarrhea. May cause cardiac disturbances. The toxicological
properties of this substance have not been fully investigated.
Ingestion of large amounts may cause CNS depression.
Inhalation:
May cause respiratory tract irritation. The toxicological properties
of this substance have not been fully investigated. Aspiration may
lead to pulmonary edema. Vapors may cause dizziness or suffocation.
May cause cardiac abnormalities. Inhalation at high concentrations
may cause CNS depression and asphixiation. May cause burning
sensation in the chest.
Chronic:
Effects may be delayed.

**** SECTION 4 - FIRST AID MEASURES ****

Eyes:
Immediately flush eyes with plenty of water for at least 15 minutes,
occasionally lifting the upper and lower eyelids. Get medical aid.
Skin:
Get medical aid. Flush skin with plenty of water for at least 15
minutes while removing contaminated clothing and shoes. Wash clothing
before reuse.
Ingestion:
Never give anything by mouth to an unconscious person. Get medical
aid. Do NOT induce vomiting. If conscious and alert, rinse mouth and
drink 2-4 cupfuls of milk or water. Wash mouth out with water.
Inhalation:
Remove from exposure and move to fresh air immediately. If not
breathing, give artificial respiration. If breathing is difficult,
give oxygen. Get medical aid. Do NOT use mouth-to-mouth
resuscitation.
Notes to Physician:
Treat symptomatically and supportively.

**** SECTION 5 - FIRE FIGHTING MEASURES ****

General Information:
As in any fire, wear a self-contained breathing apparatus in
pressure-demand, MSHA/NIOSH (approved or equivalent), and full
protective gear. Vapors may form an explosive mixture with air.
Vapors can travel to a source of ignition and flash back. During a
fire, irritating and highly toxic gases may be generated by thermal
decomposition or combustion. Will burn if involved in a fire. Use
water spray to keep fire-exposed containers cool. Containers may
explode in the heat of a fire. Flammable liquid and vapor. Vapors
may be heavier than air. They can spread along the ground and
collect in low or confined areas. Runoff from fire control or
dilution water may cause pollution.
Extinguishing Media:
Use water spray to cool fire-exposed containers. Use foam, dry
chemical, or carbon dioxide. Water may be ineffective. Use agent most
appropriate to extinguish fire. Do NOT use straight streams of water.

**** SECTION 6 - ACCIDENTAL RELEASE MEASURES ****

General Information: Use proper personal protective equipment as indicated
in Section 8.
Spills/Leaks:
Absorb spill with inert material (e.g. vermiculite, sand or earth),
then place in suitable container. Avoid runoff into storm sewers and
ditches which lead to waterways. Clean up spills immediately,
observing precautions in the Protective Equipment section. Remove all
sources of ignition. Use a spark-proof tool. Provide ventilation. A
vapor suppressing foam may be used to reduce vapors.

**** SECTION 7 - HANDLING and STORAGE ****

Handling:
Wash thoroughly after handling. Use with adequate ventilation.
Ground and bond containers when transferring material. Use
spark-proof tools and explosion proof equipment. Avoid breathing
dust, vapor, mist, or gas. Avoid contact with eyes, skin, and
clothing. Empty containers retain product residue, (liquid and/or
vapor), and can be dangerous. Keep container tightly closed. Keep
away from heat, sparks and flame. Avoid ingestion and inhalation. Do
not pressurize, cut, weld, braze, solder, drill, grind, or expose
empty containers to heat, sparks or open flames.
Storage:
Keep away from sources of ignition. Store in a tightly closed
container. Store in a cool, dry, well-ventilated area away from
incompatible substances. Flammables-area.

**** SECTION 8 - EXPOSURE CONTROLS, PERSONAL PROTECTION ****

Engineering Controls:
Facilities storing or utilizing this material should be equipped
with an eyewash facility and a safety shower. Use adequate general or
local explosion-proof ventilation to keep airborne levels to
acceptable levels.
Exposure Limits
CAS# 5573-62-6:


Personal Protective Equipment

Eyes:
Wear appropriate protective eyeglasses or chemical
safety goggles as described by OSHA's eye and face
protection regulations in 29 CFR 1910.133 or European
Standard EN166.
Skin:
Wear appropriate protective gloves to prevent skin
exposure.
Clothing:
Wear appropriate protective clothing to prevent skin
exposure.
Respirators:
Follow the OSHA respirator regulations found in 29
CFR 1910.134 or European Standard EN 149. Use a
NIOSH/MSHA or European Standard EN 149 approved
respirator if exposure limits are exceeded or if
irritation or other symptoms are experienced.

**** SECTION 9 - PHYSICAL AND CHEMICAL PROPERTIES ****

Physical State: Liquid
Color: colorless
Odor: stench
pH: Not available.
Vapor Pressure: Not available.
Viscosity: Not available.
Boiling Point: 69-70 deg C @ 100 mmHg
Freezing/Melting Point: Not available.
Autoignition Temperature: Not available.
Flash Point: 16 deg C ( 60.80 deg F)
Explosion Limits, lower: Not available.
Explosion Limits, upper: Not available.
Decomposition Temperature:
Solubility in water:
Specific Gravity/Density: 0.830
Molecular Formula: C5H14SSi
Molecular Weight: 134.2435

**** SECTION 10 - STABILITY AND REACTIVITY ****

Chemical Stability:
Stable at room temperature in closed containers under normal storage
and handling conditions.
Conditions to Avoid:
Incompatible materials, ignition sources, moisture, excess heat.
Incompatibilities with Other Materials:
Oxidizing agents.
Hazardous Decomposition Products:
Carbon monoxide, oxides of sulfur, irritating and toxic fumes and
gases, carbon dioxide, silicon dioxide.
Hazardous Polymerization: Has not been reported

**** SECTION 11 - TOXICOLOGICAL INFORMATION ****

RTECS#:
CAS# 5573-62-6 unlisted.
LD50/LC50:
Not available.
Carcinogenicity:
(Ethylthio)trimethylsilane -
Not listed by ACGIH, IARC, or NTP.

**** SECTION 12 - ECOLOGICAL INFORMATION ****



**** SECTION 13 - DISPOSAL CONSIDERATIONS ****

Dispose of in a manner consistent with federal, state, and local regulations.

**** SECTION 14 - TRANSPORT INFORMATION ****

IATA
Shipping Name: Not regulated.
Hazard Class:
UN Number:
Packing Group:
IMO
Shipping Name: Not regulated.
Hazard Class:
UN Number:
Packing Group:
RID/ADR
Shipping Name: Not regulated.
Hazard Class:
UN Number:
Packing group:

**** SECTION 15 - REGULATORY INFORMATION ****

European/International Regulations
European Labeling in Accordance with EC Directives
Hazard Symbols: F
Risk Phrases:
R 11 Highly flammable.
Safety Phrases:
S 3/7 Keep container tightly closed in a cool,
well-ventilated place.
S 9 Keep container in a well-ventilated place.
S 16 Keep away from sources of ignition - No
smoking.
S 29 Do not empty into drains.
S 33 Take precautionary measures against static
discharges.
WGK (Water Danger/Protection)
CAS# 5573-62-6: No information available.
Canada
None of the chemicals in this product are listed on the DSL/NDSL list.
CAS# 5573-62-6 is not listed on Canada's Ingredient Disclosure List.
US FEDERAL
TSCA
CAS# 5573-62-6 is not listed on the TSCA inventory.
It is for research and development use only.

**** SECTION 16 - ADDITIONAL INFORMATION ****

MSDS Creation Date: 1/27/2000 Revision #4 Date: 9/26/2002

The information above is believed to be accurate and represents the best
information currently available to us. However, we make no warranty of
merchantability or any other warranty, express or implied, with respect to
such information, and we assume no liability resulting from its use. Users
should make their own investigations to determine the suitability of the
information for their particular purposes. In no way shall the company be
liable for any claims, losses, or damages of any third party or for lost
profits or any special, indirect, incidental, consequential or exemplary
damages, howsoever arising, even if the company has been advised of
the possibility of such damages.
--------------------------------------------------------------------------------
--------------------------------------------------------------------------------
Search More   
ALL MSDS PAGES IN THIS GROUP
NAMECAS
2,3,4,5,6-Pentafluorostyrene, 97+% 653-34-9
2-(2-Chlorophenoxy)propionic acid, 98% 25140-86-7
2-Methoxyacetophenone 4079-52-1
3-Methyl-4-nitroanisole, 98% 5367-32-8
(S)-alpha-Methyl-4-carboxyphenylglycine 0-01-1
(R,S)-alfa-Methyl-4-carboxyphenylglycine 146669-29-6
(2R,4R)-4-Methylglutamic acid hydrochloride 166756-77-0
(2s,4s)-4-methylglutamic acid . hydrochloride 160806-12-2
Nbd fgin-1-27 analog 336111-14-9
Diethyl (3,3-Diethoxypropyl)Phosphonate 15110-17-5
Nifedipine, USP grade 21829-25-4
(S)-(+)-2,2,2-Trifluoro-1-(9-Anthryl)Ethanol, 97% 60646-30-2
Arsenic Trioxide 1327-53-3
2-Hydroxyethyl stearate 111-60-4
Thulium(III) Trifluoromethanesulfonate, 99% 141478-68-4
1-Fluoro-2-nitrobenzene, 97% (GC) 1493-27-2
Neodymium(III) Trifluoromethanesulfonate, 99% 34622-08-7
Methyltrioxorhenium (VII) 70197-13-6
Lanthanum(III) Trifluoromethanesulfonate, 99% 52093-26-2
Yttrium(III) Trifluoromethanesulfonate, 99% 52093-30-8
Gallium(III) Trifluoromethanesulfonate, 99% 74974-60-0
Cerium(III) Trifluoromethanesulfonate, 99% 76089-77-5
1-Chloromethyl-2,4-diisocyanatobenzene, 97% 51979-57-8
4,6-Dichloropyrimidine, 97% 1193-21-1
Methyl 5-propylthio-2-benzimidazolecarbamate, 98% 54965-21-8
(2R,3R)-1-Carboxy-2,3-Dihydroxy-4-Methylcyclohexa-4,6-Diene, 95% 0-01-1
1,3-Dichloro-1,1,3,3-tetramethyldisiloxane, 96% 2401-73-2
1,3-Dihydro-1-(1-methylethenyl)-2H-benzimidazole-2-one, 99% 52099-72-6
N-Benzylpyrrolidine, 97% 0-01-1
1-Phenyl-6,7-Dimethoxy-3,4-Dihydroisoquinoline, 98% 10172-39-1
Arsenic(V) oxide 1303-28-2
Nimodipine 66085-59-4
Formylmethyl Triphenylphopshonium Chloride, 98% 62942-43-2
1,2-Dichloropropane, 98% 78-87-5
(Ethylthio)trimethylsilane, tech., 90% 5573-62-6
PCCG-4 0-01-1
1,3-Dioxane, 97% 505-22-6
Tamoxifen.Citrate 54965-24-1
Victoria Blue B 2580-56-5
Triphenylsilyl chloride, 95% 76-86-8
DL-2-Methylserine hydrate, 98% 3398-40-1
DL-2-Isopropylserine, 99% 7522-43-2
DL-2-Isobutylserine 7522-44-3
DL-N-Benzoyl-2-Methylserine, 98% 7508-82-9
Victoria Blue R 2185-86-6
DL-N-Benzoyl-2-Isopropylserine 52421-46-2
DL-N-Benzoyl-2-Isobutylserine 52421-47-3
DL-N-Benzoyl-2-benzylserine 52421-48-4
Dl-2-benzylserine, 97% 4740-47-0
4,4'(5')-Dihydroxydibenzo-15-crown-5, 96%, contains approx. 1 mole of 0-00-1

Free MSDS Search ( Providing 250,000+ Material Properties )
Chemcas.com| Ads link:todaystock.net