Search   
MSDS 
:
 Formylmethyl Triphenylphopshonium Chloride, 98%
CAS 
:
 62942-43-2
SYNONYMS 
:
 2-Oxoethyltriphenylphosphonium Chloride.
**** SECTION 2 - COMPOSITION, INFORMATION ON INGREDIENTS ****

+----------------+--------------------------------------+----------+-----------+
| CAS# | Chemical Name | % | EINECS# |
|----------------|--------------------------------------|----------|-----------|
| 62942-43-2 |Formylmethyl Triphenylphopshonium Chlo| 98% | 263-767-2 |
+----------------+--------------------------------------+----------+-----------+
Hazard Symbols: C
Risk Phrases: 34

**** SECTION 3 - HAZARDS IDENTIFICATION ****

EMERGENCY OVERVIEW
Causes burns.Hygroscopic (absorbs moisture from the air).Corrosive.

Potential Health Effects
Eye:
Causes eye burns. May cause chemical conjunctivitis and corneal
damage.
Skin:
Causes skin burns. May cause skin rash (in milder cases), and cold
and clammy skin with cyanosis or pale color.
Ingestion:
May cause severe and permanent damage to the digestive tract. Causes
gastrointestinal tract burns. May cause perforation of the digestive
tract. The toxicological properties of this substance have not been
fully investigated. May cause systemic effects.
Inhalation:
Causes chemical burns to the respiratory tract. The toxicological
properties of this substance have not been fully investigated.
Inhalation may be fatal as a result of spasm, inflammation, edema of
the larynx and bronchi, chemical pneumonitis and pulmonary edema.
Aspiration may lead to pulmonary edema. May cause systemic effects.
May cause burning sensation, coughing, wheezing, laryngitis,
shortness of breath, headache, nausea, and vomiting.
Chronic:
Effects may be delayed.

**** SECTION 4 - FIRST AID MEASURES ****

Eyes:
Get medical aid. Do NOT allow victim to rub eyes or keep eyes
closed. Extensive irrigation with water is required (at least 30
minutes).
Skin:
Get medical aid. Flush skin with plenty of water for at least 15
minutes while removing contaminated clothing and shoes. Wash clothing
before reuse. Destroy contaminated shoes.
Ingestion:
Do not induce vomiting. If victim is conscious and alert, give 2-4
cupfuls of milk or water. Never give anything by mouth to an
unconscious person. Get medical aid.
Inhalation:
Remove from exposure and move to fresh air immediately. If not
breathing, give artificial respiration. If breathing is difficult,
give oxygen. Get medical aid. Do NOT use mouth-to-mouth
resuscitation. If breathing has ceased apply artificial respiration
using oxygen and a suitable mechanical device such as a bag and a
mask.
Notes to Physician:
Treat symptomatically and supportively.

**** SECTION 5 - FIRE FIGHTING MEASURES ****

General Information:
As in any fire, wear a self-contained breathing apparatus in
pressure-demand, MSHA/NIOSH (approved or equivalent), and full
protective gear. During a fire, irritating and highly toxic gases
may be generated by thermal decomposition or combustion.
Extinguishing Media:
Use agent most appropriate to extinguish fire. Use water spray, dry
chemical, carbon dioxide, or appropriate foam.

**** SECTION 6 - ACCIDENTAL RELEASE MEASURES ****

General Information: Use proper personal protective equipment as indicated
in Section 8.
Spills/Leaks:
Vacuum or sweep up material and place into a suitable disposal
container. Avoid runoff into storm sewers and ditches which lead to
waterways. Clean up spills immediately, observing precautions in the
Protective Equipment section. Avoid generating dusty conditions.
Provide ventilation.

**** SECTION 7 - HANDLING and STORAGE ****

Handling:
Wash thoroughly after handling. Use with adequate ventilation.
Minimize dust generation and accumulation. Avoid contact with eyes,
skin, and clothing. Keep container tightly closed. Avoid ingestion
and inhalation. Discard contaminated shoes.
Storage:
Keep container closed when not in use. Keep under a nitrogen
blanket. Store in a cool, dry, well-ventilated area away from
incompatible substances. Corrosives area. Keep refrigerated. (Store
below 4C/39F.) Store protected from moisture.

**** SECTION 8 - EXPOSURE CONTROLS, PERSONAL PROTECTION ****

Engineering Controls:
Facilities storing or utilizing this material should be equipped
with an eyewash facility and a safety shower. Use adequate
ventilation to keep airborne concentrations low.
Exposure Limits
CAS# 62942-43-2:


Personal Protective Equipment

Eyes:
Wear appropriate protective eyeglasses or chemical
safety goggles as described by OSHA's eye and face
protection regulations in 29 CFR 1910.133 or European
Standard EN166.
Skin:
Wear appropriate protective gloves to prevent skin
exposure.
Clothing:
Wear appropriate protective clothing to prevent skin
exposure.
Respirators:
A respiratory protection program that meets OSHA's 29
CFR 1910.134 and ANSI Z88.2 requirements or European
Standard EN 149 must be followed whenever workplace
conditions warrant respirator use.

**** SECTION 9 - PHYSICAL AND CHEMICAL PROPERTIES ****

Physical State: Powder
Color: yellow
Odor: none reported
pH: Not available.
Vapor Pressure: Not available.
Viscosity: Not available.
Boiling Point: Not available.
Freezing/Melting Point: 216-218 deg C
Autoignition Temperature: Not applicable.
Flash Point: Not applicable.
Explosion Limits, lower: Not available.
Explosion Limits, upper: Not available.
Decomposition Temperature:
Solubility in water:
Specific Gravity/Density:
Molecular Formula: C20H18ClOP
Molecular Weight: 340.5522

**** SECTION 10 - STABILITY AND REACTIVITY ****

Chemical Stability:
Stable at room temperature in closed containers under normal storage
and handling conditions.
Conditions to Avoid:
Incompatible materials, exposure to moist air or water.
Incompatibilities with Other Materials:
Moisture, strong acids, strong bases, strong oxidizing agents.
Hazardous Decomposition Products:
Hydrogen chloride, carbon monoxide, oxides of phosphorus, irritating
and toxic fumes and gases, carbon dioxide, phosphoric acid.
Hazardous Polymerization: Has not been reported

**** SECTION 11 - TOXICOLOGICAL INFORMATION ****

RTECS#:
CAS# 62942-43-2 unlisted.
LD50/LC50:
Not available.
Carcinogenicity:
Formylmethyl Triphenylphopshonium Chloride -
Not listed by ACGIH, IARC, or NTP.

**** SECTION 12 - ECOLOGICAL INFORMATION ****



**** SECTION 13 - DISPOSAL CONSIDERATIONS ****

Dispose of in a manner consistent with federal, state, and local regulations.

**** SECTION 14 - TRANSPORT INFORMATION ****

IATA
No information available.
IMO
No information available.
RID/ADR
No information available.

**** SECTION 15 - REGULATORY INFORMATION ****

European/International Regulations
European Labeling in Accordance with EC Directives
Hazard Symbols: C
Risk Phrases:
R 34 Causes burns.
Safety Phrases:
S 25 Avoid contact with eyes.
S 28A After contact with skin, wash immediately with
plenty of water.
S 36/37/39 Wear suitable protective clothing, gloves
and eye/face protection.
S 37 Wear suitable gloves.
S 45 In case of accident or if you feel unwell, seek
medical advice immediately (show the label where
possible).
WGK (Water Danger/Protection)
CAS# 62942-43-2: No information available.
Canada
None of the chemicals in this product are listed on the DSL/NDSL list.
CAS# 62942-43-2 is not listed on Canada's Ingredient Disclosure List.
US FEDERAL
TSCA
CAS# 62942-43-2 is not listed on the TSCA inventory.
It is for research and development use only.

**** SECTION 16 - ADDITIONAL INFORMATION ****

MSDS Creation Date: 1/27/2000 Revision #6 Date: 3/18/2003

The information above is believed to be accurate and represents the best
information currently available to us. However, we make no warranty of
merchantability or any other warranty, express or implied, with respect to
such information, and we assume no liability resulting from its use. Users
should make their own investigations to determine the suitability of the
information for their particular purposes. In no way shall the company be
liable for any claims, losses, or damages of any third party or for lost
profits or any special, indirect, incidental, consequential or exemplary
damages, howsoever arising, even if the company has been advised of
the possibility of such damages.
--------------------------------------------------------------------------------
--------------------------------------------------------------------------------
Search More   
ALL MSDS PAGES IN THIS GROUP
NAMECAS
2,3,4,5,6-Pentafluorostyrene, 97+% 653-34-9
2-(2-Chlorophenoxy)propionic acid, 98% 25140-86-7
2-Methoxyacetophenone 4079-52-1
3-Methyl-4-nitroanisole, 98% 5367-32-8
(S)-alpha-Methyl-4-carboxyphenylglycine 0-01-1
(R,S)-alfa-Methyl-4-carboxyphenylglycine 146669-29-6
(2R,4R)-4-Methylglutamic acid hydrochloride 166756-77-0
(2s,4s)-4-methylglutamic acid . hydrochloride 160806-12-2
Nbd fgin-1-27 analog 336111-14-9
Diethyl (3,3-Diethoxypropyl)Phosphonate 15110-17-5
Nifedipine, USP grade 21829-25-4
(S)-(+)-2,2,2-Trifluoro-1-(9-Anthryl)Ethanol, 97% 60646-30-2
Arsenic Trioxide 1327-53-3
2-Hydroxyethyl stearate 111-60-4
Thulium(III) Trifluoromethanesulfonate, 99% 141478-68-4
1-Fluoro-2-nitrobenzene, 97% (GC) 1493-27-2
Neodymium(III) Trifluoromethanesulfonate, 99% 34622-08-7
Methyltrioxorhenium (VII) 70197-13-6
Lanthanum(III) Trifluoromethanesulfonate, 99% 52093-26-2
Yttrium(III) Trifluoromethanesulfonate, 99% 52093-30-8
Gallium(III) Trifluoromethanesulfonate, 99% 74974-60-0
Cerium(III) Trifluoromethanesulfonate, 99% 76089-77-5
1-Chloromethyl-2,4-diisocyanatobenzene, 97% 51979-57-8
4,6-Dichloropyrimidine, 97% 1193-21-1
Methyl 5-propylthio-2-benzimidazolecarbamate, 98% 54965-21-8
(2R,3R)-1-Carboxy-2,3-Dihydroxy-4-Methylcyclohexa-4,6-Diene, 95% 0-01-1
1,3-Dichloro-1,1,3,3-tetramethyldisiloxane, 96% 2401-73-2
1,3-Dihydro-1-(1-methylethenyl)-2H-benzimidazole-2-one, 99% 52099-72-6
N-Benzylpyrrolidine, 97% 0-01-1
1-Phenyl-6,7-Dimethoxy-3,4-Dihydroisoquinoline, 98% 10172-39-1
Arsenic(V) oxide 1303-28-2
Nimodipine 66085-59-4
Formylmethyl Triphenylphopshonium Chloride, 98% 62942-43-2
1,2-Dichloropropane, 98% 78-87-5
(Ethylthio)trimethylsilane, tech., 90% 5573-62-6
PCCG-4 0-01-1
1,3-Dioxane, 97% 505-22-6
Tamoxifen.Citrate 54965-24-1
Victoria Blue B 2580-56-5
Triphenylsilyl chloride, 95% 76-86-8
DL-2-Methylserine hydrate, 98% 3398-40-1
DL-2-Isopropylserine, 99% 7522-43-2
DL-2-Isobutylserine 7522-44-3
DL-N-Benzoyl-2-Methylserine, 98% 7508-82-9
Victoria Blue R 2185-86-6
DL-N-Benzoyl-2-Isopropylserine 52421-46-2
DL-N-Benzoyl-2-Isobutylserine 52421-47-3
DL-N-Benzoyl-2-benzylserine 52421-48-4
Dl-2-benzylserine, 97% 4740-47-0
4,4'(5')-Dihydroxydibenzo-15-crown-5, 96%, contains approx. 1 mole of 0-00-1

Free MSDS Search ( Providing 250,000+ Material Properties )
Chemcas.com| Ads link:todaystock.net