Search   
MSDS 
:
 N-Acetylthiourea, 99.5%
CAS 
:
 591-08-2
SYNONYMS 
:
 Acetamide, N-(aminothioxomethyl)-; Acetothiourea;     Acetylthiocarbamide; N-Acetylthiocarbamide; Acetyl thiourea;     1-Acetylthiourea; 1-Acetyl-2-thiourea; Urea, 1-acetyl-2-thio-
**** SECTION 2 - COMPOSITION, INFORMATION ON INGREDIENTS ****

+----------------+--------------------------------------+----------+-----------+
| CAS# | Chemical Name | % | EINECS# |
|----------------|--------------------------------------|----------|-----------|
| 591-08-2 |N-Acetylthiourea | 99.5 | 209-699-9 |
+----------------+--------------------------------------+----------+-----------+
Hazard Symbols: T
Risk Phrases: 23/24/25

**** SECTION 3 - HAZARDS IDENTIFICATION ****

EMERGENCY OVERVIEW
Toxic by inhalation, in contact with skin and if swallowed.The
toxicological properties of this material have not been fully
investigated.

Potential Health Effects
Eye:
May cause eye irritation.
Skin:
May cause skin irritation. May cause allergic contact dermatitis.
Ingestion:
May be fatal if swallowed. May cause gastrointestinal irritation
with nausea, vomiting and diarrhea. The toxicological properties of
this substance have not been fully investigated.
Inhalation:
May cause respiratory tract irritation. The toxicological properties
of this substance have not been fully investigated. May cause
irritation of the mucous membranes.
Chronic:
No information found.

**** SECTION 4 - FIRST AID MEASURES ****

Eyes:
Immediately flush eyes with plenty of water for at least 15 minutes,
occasionally lifting the upper and lower eyelids. Get medical aid
immediately.
Skin:
Get medical aid immediately. Immediately flush skin with plenty of
water for at least 15 minutes while removing contaminated clothing
and shoes.
Ingestion:
Never give anything by mouth to an unconscious person. Get medical
aid immediately. Do NOT induce vomiting. If conscious and alert,
rinse mouth and drink 2-4 cupfuls of milk or water. Induce vomiting
only when instructed to do so by a physician.
Inhalation:
Get medical aid immediately. Remove from exposure and move to fresh
air immediately. Do not use mouth-to-mouth resuscitation if victim
ingested or inhaled the substance; induce artificial respiration with
the aid of a pocket mask equipped with a one-way valve or other
proper respiratory medical device.
Notes to Physician:

**** SECTION 5 - FIRE FIGHTING MEASURES ****

General Information:
As in any fire, wear a self-contained breathing apparatus in
pressure-demand, MSHA/NIOSH (approved or equivalent), and full
protective gear. During a fire, irritating and highly toxic gases
may be generated by thermal decomposition or combustion.
Extinguishing Media:
Use water spray, dry chemical, carbon dioxide, or appropriate foam.

**** SECTION 6 - ACCIDENTAL RELEASE MEASURES ****

General Information: Use proper personal protective equipment as indicated
in Section 8.
Spills/Leaks:
Wash area with soap and water. Clean up spills immediately,
observing precautions in the Protective Equipment section. Sweep up,
then place into a suitable container for disposal. Avoid generating
dusty conditions. Provide ventilation.

**** SECTION 7 - HANDLING and STORAGE ****

Handling:
Wash thoroughly after handling. Remove contaminated clothing and
wash before reuse. Use only in a well-ventilated area. Do not get in
eyes, on skin, or on clothing. Keep container tightly closed. Do not
ingest or inhale. Use only in a chemical fume hood. Discard
contaminated shoes.
Storage:
Store in a cool, dry, well-ventilated area away from incompatible
substances. Keep containers tightly closed.

**** SECTION 8 - EXPOSURE CONTROLS, PERSONAL PROTECTION ****

Engineering Controls:
Facilities storing or utilizing this material should be equipped
with an eyewash facility and a safety shower. Use adequate
ventilation to keep airborne concentrations low.
Exposure Limits
CAS# 591-08-2:


Personal Protective Equipment

Eyes:
Wear appropriate protective eyeglasses or chemical
safety goggles as described by OSHA's eye and face
protection regulations in 29 CFR 1910.133 or European
Standard EN166.
Skin:
Wear appropriate protective gloves to prevent skin
exposure.
Clothing:
Wear appropriate protective clothing to prevent skin
exposure.
Respirators:
A respiratory protection program that meets OSHA's 29
CFR 1910.134 and ANSI Z88.2 requirements or European
Standard EN 149 must be followed whenever workplace
conditions warrant respirator use.

**** SECTION 9 - PHYSICAL AND CHEMICAL PROPERTIES ****

Physical State: Crystals
Color: white
Odor: none reported
pH: Not available.
Vapor Pressure: Not available.
Viscosity: Not available.
Boiling Point: Not available.
Freezing/Melting Point: 165.00 - 169.00 deg C
Autoignition Temperature: Not applicable.
Flash Point: Not applicable.
Explosion Limits, lower: Not available.
Explosion Limits, upper: Not available.
Decomposition Temperature: Not available.
Solubility in water: Soluble in hot water.
Specific Gravity/Density: Not available.
Molecular Formula: CH3CONHCSNH2
Molecular Weight: 118.15

**** SECTION 10 - STABILITY AND REACTIVITY ****

Chemical Stability:
Stable under normal temperatures and pressures.
Conditions to Avoid:
Incompatible materials.
Incompatibilities with Other Materials:
Strong oxidizing agents, strong acids, strong bases.
Hazardous Decomposition Products:
Nitrogen oxides, carbon monoxide, oxides of sulfur, carbon dioxide.
Hazardous Polymerization: Has not been reported

**** SECTION 11 - TOXICOLOGICAL INFORMATION ****

RTECS#:
CAS# 591-08-2: YR7700000
LD50/LC50:
CAS# 591-08-2: Oral, rat: LD50 = 50 mg/kg.
Carcinogenicity:
N-Acetylthiourea -
Not listed by ACGIH, IARC, or NTP.
Other:
See actual entry in RTECS for complete information.

**** SECTION 12 - ECOLOGICAL INFORMATION ****

Other
No information available.

**** SECTION 13 - DISPOSAL CONSIDERATIONS ****

Dispose of in a manner consistent with federal, state, and local regulations.

**** SECTION 14 - TRANSPORT INFORMATION ****

IATA
Shipping Name: TOXIC SOLID, ORGANIC, N.O.S.*
Hazard Class: 6.1
UN Number: 2811
Packing Group: II
IMO
Shipping Name: TOXIC SOLID, ORGANIC, N.O.S.
Hazard Class: 6.1
UN Number: 2811
Packing Group: II
RID/ADR
Shipping Name: TOXIC SOLID, ORGANIC, N.O.S.
Hazard Class: 6.1
UN Number: 2811
Packing group: II
USA RQ: CAS# 591-08-2: 1000 lb final RQ; 454 kg final RQ

**** SECTION 15 - REGULATORY INFORMATION ****

European/International Regulations
European Labeling in Accordance with EC Directives
Hazard Symbols: T
Risk Phrases:
R 23/24/25 Toxic by inhalation, in contact with skin
and if swallowed.
Safety Phrases:
S 23 Do not inhale gas/fumes/vapour/spray.
S 24/25 Avoid contact with skin and eyes.
WGK (Water Danger/Protection)
CAS# 591-08-2: No information available.
Canada
CAS# 591-08-2 is listed on Canada's NDSL List.
CAS# 591-08-2 is not listed on Canada's Ingredient Disclosure List.
US FEDERAL
TSCA
CAS# 591-08-2 is listed on the TSCA inventory.

**** SECTION 16 - ADDITIONAL INFORMATION ****

MSDS Creation Date: 9/02/1997 Revision #4 Date: 3/18/2003

The information above is believed to be accurate and represents the best
information currently available to us. However, we make no warranty of
merchantability or any other warranty, express or implied, with respect to
such information, and we assume no liability resulting from its use. Users
should make their own investigations to determine the suitability of the
information for their particular purposes. In no way shall the company be
liable for any claims, losses, or damages of any third party or for lost
profits or any special, indirect, incidental, consequential or exemplary
damages, howsoever arising, even if the company has been advised of
the possibility of such damages.
--------------------------------------------------------------------------------
--------------------------------------------------------------------------------
Search More   
ALL MSDS PAGES IN THIS GROUP
NAMECAS
Cyclen, 97% 294-90-6
4-Hydroxy Benzylidene Malonic Acid Dimethyl Ester, 97+% 51947-45-6
2-Bromo-5-Nitrothiazole, 98% 3034-48-8
Nickel (II) Chloride Hexahydrate 7791-20-0
9-Aminoacridine hemihydrate, 98% 90-45-9
3-Bromothiophene, 97+% 872-31-1
3-Aminobenzoic acid, 99+% 99-05-8
1,2,5,6,9,10-Hexabromocyclododecane, Tech. 3194-55-6
DL-Menthol, 99% 1490-04-6
2,4-Dimethyl-2,6-Heptadien-1-ol, 99% 80192-56-9
Nickel(II) nitrate hexahydrate 13138-45-9
Nickel (II) Oxide, Green or Black 1313-99-1
L-Tyrosine Hydrazide, 98% 7662-51-3
Germanium Dioxide, 99.999%, electronic grade 1310-53-8
DL-Propranolol Hydrochloride, 99% 318-98-9
Pentachlorocyclopropane, 98% 6262-51-7
Nickel (II) sulfate hexahydrate 10101-97-0
Phenylarsonic acid, 97% 98-05-5
3-[5-(Dimethylamino)-1-naphthalenesulfonamido]-PROXYL, free radical, 76841-99-1
Nickel (II) Carbonate 3333-67-3
Nickel (II) Ammomium Sulfate Hexahydrate 7785-20-8
Nicotine (pract), 95% (gc) 54-11-5
5(6)-Carboxyfluorescein disodium salt, monohydrate
1,4-Dichloro-2-butyne, 99% 821-10-3
Poly(4-methoxystyrene) 24936-44-5
Benzothiazole, 97% 95-16-9
Fast garnet GBC, zinc chloride salt
Diphenylamine Hydrochloride, 99% (Titr.) 537-67-7
Pentafluorobenzonitrile, 97+% 773-82-0
4-Hydrazinobenzoic Acid, 98% (Titr.) 619-67-0
Poly(chloroprene) 9010-98-4
4-Pyridinealdoxime, 98% 696-54-8
Duroquinone, 97% 527-17-3
Methyl isonicotinate, 98% 2459-09-8
Ninhydrin Monohydrate 485-47-2
Thallium (I) Bromide, 99% 7789-40-4
3-Phenoxybenzyl alcohol, 98% 13826-35-2
Trans-2-Heptenal, 97% 18829-55-5
syn-2-Pyridinealdoxime, 99+% 873-69-8
N-Acetylthiourea, 99.5% 591-08-2
1-(2,2-Diethoxyethyl)guanidine sulfate , 99% 52225-73-7
Nitric acid, red fuming 7697-37-2
Nitric acid, 20-70% 7697-37-2
Boc-Glycine, 99+% 4530-20-5
3,4-Dichlorophenylacetic Acid, 98% 5807-30-7
Trilaurin 538-24-9
2-Cyanoacetanilide, 98% 621-03-4
3-Methyl-2-quinoxalinol 14003-34-0
Nitrobenzene, reagent ACS 98-95-3
5-Chloro-2-pentanone, 97% 5891-21-4

Free MSDS Search ( Providing 250,000+ Material Properties )
Chemcas.com| Ads link:todaystock.net