Search   
MSDS 
:
 Triphenylmethyl bromide, 98%
CAS 
:
 596-43-0
SYNONYMS 
:
 Bromotriphenylmethane; Trityl bromide.
**** SECTION 2 - COMPOSITION, INFORMATION ON INGREDIENTS ****

+----------------+--------------------------------------+----------+-----------+
| CAS# | Chemical Name | % | EINECS# |
|----------------|--------------------------------------|----------|-----------|
| 596-43-0 |Triphenylmethyl bromide | 98 | 209-884-4 |
+----------------+--------------------------------------+----------+-----------+
Hazard Symbols: C
Risk Phrases: 34

**** SECTION 3 - HAZARDS IDENTIFICATION ****

EMERGENCY OVERVIEW
Causes burns.

Potential Health Effects
Eye:
Causes eye burns.
Skin:
Causes skin burns.
Ingestion:
Causes gastrointestinal tract burns. May cause cardiac disturbances.
May cause central nervous system depression.
Inhalation:
Causes chemical burns to the respiratory tract. May cause cardiac
abnormalities. May cause systemic effects. Inhalation at high
concentrations may cause CNS depression and asphixiation.
Chronic:
Effects may be delayed.

**** SECTION 4 - FIRST AID MEASURES ****

Eyes:
Get medical aid immediately. Do NOT allow victim to rub eyes or keep
eyes closed. Extensive irrigation with water is required (at least 30
minutes).
Skin:
Get medical aid immediately. Immediately flush skin with plenty of
water for at least 15 minutes while removing contaminated clothing
and shoes. Wash clothing before reuse. Destroy contaminated shoes.
Ingestion:
Never give anything by mouth to an unconscious person. Get medical
aid immediately. Do NOT induce vomiting. If conscious and alert,
rinse mouth and drink 2-4 cupfuls of milk or water.
Inhalation:
Get medical aid immediately. Remove from exposure and move to fresh
air immediately. If breathing is difficult, give oxygen. Do NOT use
mouth-to-mouth resuscitation. If breathing has ceased apply
artificial respiration using oxygen and a suitable mechanical device
such as a bag and a mask.
Notes to Physician:

**** SECTION 5 - FIRE FIGHTING MEASURES ****

General Information:
As in any fire, wear a self-contained breathing apparatus in
pressure-demand, MSHA/NIOSH (approved or equivalent), and full
protective gear. During a fire, irritating and highly toxic gases
may be generated by thermal decomposition or combustion. Contact
with metals may evolve flammable hydrogen gas. Containers may explode
when heated. Non-combustible, substance itself does not burn but may
decompose upon heating to produce irritating, corrosive and/or toxic
fumes. Runoff from fire control or dilution water may cause
pollution.
Extinguishing Media:
Substance is noncombustible; use agent most appropriate to
extinguish surrounding fire.

**** SECTION 6 - ACCIDENTAL RELEASE MEASURES ****

General Information: Use proper personal protective equipment as indicated
in Section 8.
Spills/Leaks:
Vacuum or sweep up material and place into a suitable disposal
container. Clean up spills immediately, observing precautions in the
Protective Equipment section. Avoid generating dusty conditions.
Provide ventilation.

**** SECTION 7 - HANDLING and STORAGE ****

Handling:
Wash thoroughly after handling. Remove contaminated clothing and
wash before reuse. Use with adequate ventilation. Minimize dust
generation and accumulation. Do not get in eyes, on skin, or on
clothing. Keep container tightly closed. Do not ingest or inhale.
Discard contaminated shoes.
Storage:
Keep container closed when not in use. Corrosives area. Keep
refrigerated. (Store below 4C/39F.)

**** SECTION 8 - EXPOSURE CONTROLS, PERSONAL PROTECTION ****

Engineering Controls:
Facilities storing or utilizing this material should be equipped
with an eyewash facility and a safety shower. Use adequate
ventilation to keep airborne concentrations low.
Exposure Limits
CAS# 596-43-0:


Personal Protective Equipment

Eyes:
Wear appropriate protective eyeglasses or chemical
safety goggles as described by OSHA's eye and face
protection regulations in 29 CFR 1910.133 or European
Standard EN166.
Skin:
Wear appropriate protective gloves to prevent skin
exposure.
Clothing:
Wear appropriate protective clothing to prevent skin
exposure.
Respirators:
Follow the OSHA respirator regulations found in 29
CFR 1910.134 or European Standard EN 149. Use a
NIOSH/MSHA or European Standard EN 149 approved
respirator if exposure limits are exceeded or if
irritation or other symptoms are experienced.

**** SECTION 9 - PHYSICAL AND CHEMICAL PROPERTIES ****

Physical State: Solid
Color: slightly yellow
Odor: None reported.
pH: Not available.
Vapor Pressure: Not available.
Viscosity: Not available.
Boiling Point: 230 deg C @ 15 mmHg
Freezing/Melting Point: 151-155 deg C
Autoignition Temperature: Not applicable.
Flash Point: Not applicable.
Explosion Limits, lower: Not available.
Explosion Limits, upper: Not available.
Decomposition Temperature:
Solubility in water: insoluble
Specific Gravity/Density:
Molecular Formula: C19H15Br
Molecular Weight: 323.22

**** SECTION 10 - STABILITY AND REACTIVITY ****

Chemical Stability:
Stable under normal temperatures and pressures.
Conditions to Avoid:
Dust generation, excess heat.
Incompatibilities with Other Materials:
Strong oxidizing agents.
Hazardous Decomposition Products:
Carbon monoxide, irritating and toxic fumes and gases, carbon
dioxide, hydrogen bromide.
Hazardous Polymerization: Has not been reported.

**** SECTION 11 - TOXICOLOGICAL INFORMATION ****

RTECS#:
CAS# 596-43-0: PA5550000
LD50/LC50:
Not available.
Carcinogenicity:
Triphenylmethyl bromide -
Not listed by ACGIH, IARC, or NTP.
Other:
See actual entry in RTECS for complete information.

**** SECTION 12 - ECOLOGICAL INFORMATION ****



**** SECTION 13 - DISPOSAL CONSIDERATIONS ****

Dispose of in a manner consistent with federal, state, and local regulations.

**** SECTION 14 - TRANSPORT INFORMATION ****

IATA
Shipping Name: CORROSIVE SOLID, N.O.S.*
Hazard Class: 8
UN Number: 1759
Packing Group: II
IMO
Shipping Name: CORROSIVE SOLID, N.O.S.
Hazard Class: 8
UN Number: 1759
Packing Group: II
RID/ADR
Shipping Name: CORROSIVE SOLID, N.O.S.
Hazard Class: 8
UN Number: 1759
Packing group: II

**** SECTION 15 - REGULATORY INFORMATION ****

European/International Regulations
European Labeling in Accordance with EC Directives
Hazard Symbols: C
Risk Phrases:
R 34 Causes burns.
Safety Phrases:
S 24/25 Avoid contact with skin and eyes.
WGK (Water Danger/Protection)
CAS# 596-43-0: No information available.
Canada
CAS# 596-43-0 is listed on Canada's NDSL List.
CAS# 596-43-0 is not listed on Canada's Ingredient Disclosure List.
US FEDERAL
TSCA
CAS# 596-43-0 is listed on the TSCA inventory.

**** SECTION 16 - ADDITIONAL INFORMATION ****

MSDS Creation Date: 9/02/1997 Revision #6 Date: 1/20/2005

The information above is believed to be accurate and represents the best
information currently available to us. However, we make no warranty of
merchantability or any other warranty, express or implied, with respect to
such information, and we assume no liability resulting from its use. Users
should make their own investigations to determine the suitability of the
information for their particular purposes. In no way shall the company be
liable for any claims, losses, or damages of any third party or for lost
profits or any special, indirect, incidental, consequential or exemplary
damages, howsoever arising, even if the company has been advised of
the possibility of such damages.
--------------------------------------------------------------------------------
--------------------------------------------------------------------------------
Search More   
ALL MSDS PAGES IN THIS GROUP
NAMECAS
3-Dimethylaminopropiophenone Hydrochloride, 99% 879-72-1
Polycarbonate resin, approximate m.w. 64.000,pellets 24936-68-3
Serotonin Hydrochloride Hydrate, 99% 153-98-0
Triphenylmethyl bromide, 98% 596-43-0
2-Amino-5-picoline, 99% 1603-41-4
Lead subacetate 1335-32-6
5,6-Diamino-2,4-dihydroxypyrimidine hemisulfate, hydrate, 98% 63981-35-1
Trans-2-Heptene, 97% 14686-13-6
Lead Sulfide 1314-87-0
Uric acid, 99+% 69-93-2
Tetrabutylammonium Perchlorate, 99% (Titr.) 1923-70-2
Cis-1,2,3,6-Tetrahydrophthalimide, 96% 27813-21-4
Lead Tetraoxide 1314-41-6
trans-2-Methylcyclohexanol, 97% 7443-52-9
Lecithin 8002-43-5
2-Pyridinealdoxime methochloride, 99% 51-15-0
4-Fluorobenzal chloride, 98% 456-19-9
Dimethyl cyanamide, 97+% 1467-79-4
d-Camphoroquinone 2767-84-2
Light Green SF, Yellowish 5141-20-8
Petroleum ether (EMD) 8032-32-4
2-Ethylanisole, 99% 14804-32-1
4-(2-Keto-1-benzimidazolinyl)piperidine, 97% 20662-53-7
n-Methoxymethylaza-12-crown-4, 95%
1-Hexyne, 99% 693-02-7
Ethyl 1-methylpipecolinate, 97% 30727-18-5
Lithium 7439-93-2
4-Chloro-3,5-Dinitrobenzoic Acid, 99% 118-97-8
1,5-Hexadiene, Tech. 80+% 592-42-7
Lithium Bromide 7550-35-8
Lithium Carbonate 554-13-2
Myristanilide, 96% (gc) 622-56-0
Lithium chloride 7447-41-8
2,6-Di-Tert.-Butyl-P-Benzoquinone, 98% 719-22-2
2-Methyl-3-nitroaniline 97% 603-83-8
9-Amino-1,2,3,4-tetrahydroacridine hydrochloride hydrate, 99+% (tlc) 321-64-2
Lithium dodecyl sulfate 2044-56-6
Lithium Fluoride 7789-24-4
Silver Difluoride, 99% 7783-95-1
Lithium Hydroxide Anhydrous 554-13-2
Lithium Hydroxide Monohydrate 1310-66-3
Lithium nitrate 7790-69-4
(r)-(+)-2-Phenyl-1-propanol, 99+% 1572-95-8
2S,4s-(+)-pentanediol, 99% 72345-23-4
Alpha, Alpha, Alpha-Trifluoro-M-Cresol 98+% 98-16-8
Thallic Trifluoroacetate 23586-53-0
2-(4-Chloro-3-Nitrobenzoyl)benzoic Acid, 98% 85-54-1
2-AMINO-QUINOLINE 580-22-3
4-Bromobutyl acetate, 98% 18991-98-5
4-Morpholinoacetophenone, 99% 39910-98-0

Free MSDS Search ( Providing 250,000+ Material Properties )
Chemcas.com| Ads link:todaystock.net