Search   
MSDS 
:
 3-Formylsalicylic acid, 97%
CAS 
:
 610-04-8
SYNONYMS 
:
 None.
**** SECTION 2 - COMPOSITION, INFORMATION ON INGREDIENTS ****

+----------------+--------------------------------------+----------+-----------+
| CAS# | Chemical Name | % | EINECS# |
|----------------|--------------------------------------|----------|-----------|
| 610-04-8 |3-Formylsalicylic acid | 97% | unlisted |
+----------------+--------------------------------------+----------+-----------+
Hazard Symbols: None Listed.
Risk Phrases: None Listed.

**** SECTION 3 - HAZARDS IDENTIFICATION ****

EMERGENCY OVERVIEW
The toxicological properties of this material have not been fully
investigated.

Potential Health Effects
Eye:
May cause eye irritation.
Skin:
May cause skin irritation.
Ingestion:
May cause digestive tract disturbances. The toxicological properties
of this substance have not been fully investigated.
Inhalation:
May cause respiratory tract irritation. The toxicological properties
of this substance have not been fully investigated.
Chronic:
No information found.

**** SECTION 4 - FIRST AID MEASURES ****

Eyes:
Flush eyes with plenty of water for at least 15 minutes,
occasionally lifting the upper and lower eyelids. If irritation
develops, get medical aid.
Skin:
Flush skin with plenty of water for at least 15 minutes while
removing contaminated clothing and shoes. Get medical aid if
irritation develops or persists. Wash clothing before reuse.
Ingestion:
If victim is conscious and alert, give 2-4 cupfuls of milk or water.
Never give anything by mouth to an unconscious person. Get medical
aid. Wash mouth out with water.
Inhalation:
Remove from exposure and move to fresh air immediately. If not
breathing, give artificial respiration. If breathing is difficult,
give oxygen.
Notes to Physician:

**** SECTION 5 - FIRE FIGHTING MEASURES ****

General Information:
As in any fire, wear a self-contained breathing apparatus in
pressure-demand, MSHA/NIOSH (approved or equivalent), and full
protective gear.
Extinguishing Media:
Use water spray, dry chemical, carbon dioxide, or chemical foam. Use
agent most appropriate to extinguish fire.

**** SECTION 6 - ACCIDENTAL RELEASE MEASURES ****

General Information: Use proper personal protective equipment as indicated
in Section 8.
Spills/Leaks:
Vacuum or sweep up material and place into a suitable disposal
container. Avoid generating dusty conditions. Provide ventilation.

**** SECTION 7 - HANDLING and STORAGE ****

Handling:
Wash hands before eating. Avoid breathing dust, vapor, mist, or gas.
Avoid contact with skin and eyes. Keep container tightly closed. Use
with adequate ventilation.
Storage:
Store in a tightly closed container. Store in a cool, dry,
well-ventilated area away from incompatible substances.

**** SECTION 8 - EXPOSURE CONTROLS, PERSONAL PROTECTION ****

Engineering Controls:
Facilities storing or utilizing this material should be equipped
with an eyewash facility and a safety shower. Use process enclosure,
local exhaust ventilation, or other engineering controls to control
airborne levels.
Exposure Limits
CAS# 610-04-8:


Personal Protective Equipment

Eyes:
Wear appropriate protective eyeglasses or chemical
safety goggles as described by OSHA's eye and face
protection regulations in 29 CFR 1910.133 or European
Standard EN166.
Skin:
Wear appropriate protective gloves to prevent skin
exposure.
Clothing:
Wear a chemical apron. Wear appropriate clothing to
prevent skin exposure.
Respirators:
A NIOSH/MSHA approved air purifying dust or mist
respirator or European Standard EN 149. Follow the
OSHA respirator regulations found in 29 CFR 1910.134
or European Standard EN 149. Use a NIOSH/MSHA or
European Standard EN 149 approved respirator if
exposure limits are exceeded or if irritation or other
symptoms are experienced.

**** SECTION 9 - PHYSICAL AND CHEMICAL PROPERTIES ****

Physical State: Solid
Color: off-white
Odor: acetic odor
pH: Not available.
Vapor Pressure: Not available.
Viscosity: Not available.
Boiling Point: Not available.
Freezing/Melting Point: 180 - 183 deg C
Autoignition Temperature: Not available.
Flash Point: Not available.
Explosion Limits, lower: N/A
Explosion Limits, upper: N/A
Decomposition Temperature:
Solubility in water:
Specific Gravity/Density:
Molecular Formula: C8H6O4
Molecular Weight: 166.13

**** SECTION 10 - STABILITY AND REACTIVITY ****

Chemical Stability:
Stable under normal temperatures and pressures.
Conditions to Avoid:
Incompatible materials, moisture.
Incompatibilities with Other Materials:
Strong oxidizing agents.
Hazardous Decomposition Products:
Carbon monoxide, irritating and toxic fumes and gases, carbon
dioxide.
Hazardous Polymerization: Has not been reported.

**** SECTION 11 - TOXICOLOGICAL INFORMATION ****

RTECS#:
CAS# 610-04-8 unlisted.
LD50/LC50:
Not available.
Carcinogenicity:
3-Formylsalicylic acid -
Not listed by ACGIH, IARC, or NTP.

**** SECTION 12 - ECOLOGICAL INFORMATION ****



**** SECTION 13 - DISPOSAL CONSIDERATIONS ****

Dispose of in a manner consistent with federal, state, and local regulations.

**** SECTION 14 - TRANSPORT INFORMATION ****

IATA
Not regulated as a hazardous material.
IMO
Not regulated as a hazardous material.
RID/ADR
Not regulated as a hazardous material.

**** SECTION 15 - REGULATORY INFORMATION ****

European/International Regulations
European Labeling in Accordance with EC Directives
Hazard Symbols: Not available.
Risk Phrases:
Safety Phrases:
S 24/25 Avoid contact with skin and eyes.
WGK (Water Danger/Protection)
CAS# 610-04-8: No information available.
Canada
None of the chemicals in this product are listed on the DSL/NDSL list.
CAS# 610-04-8 is not listed on Canada's Ingredient Disclosure List.
US FEDERAL
TSCA
CAS# 610-04-8 is not listed on the TSCA inventory.
It is for research and development use only.

**** SECTION 16 - ADDITIONAL INFORMATION ****

MSDS Creation Date: 1/14/1998 Revision #2 Date: 3/18/2003

The information above is believed to be accurate and represents the best
information currently available to us. However, we make no warranty of
merchantability or any other warranty, express or implied, with respect to
such information, and we assume no liability resulting from its use. Users
should make their own investigations to determine the suitability of the
information for their particular purposes. In no way shall the company be
liable for any claims, losses, or damages of any third party or for lost
profits or any special, indirect, incidental, consequential or exemplary
damages, howsoever arising, even if the company has been advised of
the possibility of such damages.
--------------------------------------------------------------------------------
--------------------------------------------------------------------------------
Search More   
ALL MSDS PAGES IN THIS GROUP
NAMECAS
3-Methyl-5-Methoxycarbonyl-1-Benzyl-4-Piperidone Hydrochloride, 99% 0-01-1
4-Decanol, 99% 2051-31-2
5-Chloro-1,3-dimethoxybenzene, 97+% 7051-16-3
Bis-(Benzonitrile)-Palladium(II)Chloride, 99+% 14220-64-5
N-(1-Anilinonaphthyl-4)-Maleimide 50539-45-2
4-Chloro-O-Anisic Acid, 99% 57479-70-6
Furfuryl Mercaptan, 97% 98-02-2
4-Methoxybenzenethiol, 98% 696-63-9
6-Dimethylaminopurine 938-55-6
2-Amino-4,6-Dichloropyrimidine, Tech. 56-05-3
2,4-Dihydroxy-n-(2-Hydroxyethyl)benzamide, 99% (TLC) 24207-41-8
Brucine dihydrate, 99% 145428-94-0
2-Indanol, 99% 4254-29-9
Trifluoroacetic Acid, Ammonium Salt, 98% 3336-58-1
10-Methylphenothiazine 1207-72-3
Trimethyl Phosphate, P.A. 512-56-1
4-Bromotoluene, 99% 106-38-7
Ethylenediaminetetraacetic Acid Copper, Disodium Salt Dihydrate, 98% 61916-40-3
3-Methylsalicylic acid, 99% 83-40-9
5-Benzyloxytryptamine hydrochloride, 98% 52055-23-9
3-Formylsalicylic acid, 97% 610-04-8
3-Methylcyclopentanol, 99%, mixture of isomers 18729-48-1
L(-)-Dibenzoyl-L-tartaric acid monohydrate , 98% 2743-38-6
1-Phenoxy-2-propanol,97% 770-35-4
Ethyl 2(2-Aminothiazole-4-yl)-2-Methoxyiminoacetate, 98% 64485-88-7
Borane-tetrahydrofuran complex, 1M solution in tetrahydrofuran 109-99-9
N-Phenyl-P-Phenylenediamine Monohydro-Chloride, 99% (Titr.) 2198-59-6
Dipentaerythritol, 90% 126-58-9
2,4'-Dipyridyl, 97+% 581-47-5
N,N-Bis(2-Cyanoethyl)Formamide 3445-84-9
L-(+)-Lysine Monohydrate 99% 39665-12-8
Albizziin, 98% 1483-07-4
2-Methyltetrahydrofuran-3-one, 98% 3188-00-9
N-Acryloyltris(Hydroxymethyl)aminomethane (Nat) 13880-05-2
Sulforhodamine 101 (Free Acid), Laser Grade, 99% (UV-Vis) 82354-19-6
Progesterone, 98% 57-83-0
5-Bromo-2-Fluorobenzaldehyde, 98% 93777-26-5
5-Amino-3-Methylisothiazole Hydrochloride 52547-00-9
Pentafluoropropionic Anhydride 356-42-3
Albumine bovine serum,additional reagent for igss, protease free
D-(+)-Methioninol 87206-44-8
alpha-Chloro-o-xylene, 99% 552-45-4
2-(5-Bromo-2-Pyridylazo)-5- (Diethylamino)Phenol, 99+% (Titr.) 14337-53-2
(S)-(+)-alpha-Methoxy-alpha-trifluoro-methylphenylacetyl chloride, 20445-33-4
(1S,2S,3R,5S)-(+)-2,3-Pinanediol, 98% 18680-27-8
Molecular Sieves, 3A, 8 to 12 Mesh 308080-99-1
1-Methyl-4-piperidone, 98% 1445-73-4
2-Amino-6,7-Dimethyl-4-Hydroxypteridine 611-55-2
Dinonyl Phthalate 84-76-4
Phenyl sulfoxide, 97% 945-51-7

Free MSDS Search ( Providing 250,000+ Material Properties )
Chemcas.com| Ads link:todaystock.net