**** SECTION 2 - COMPOSITION, INFORMATION ON INGREDIENTS ****
+----------------+--------------------------------------+----------+-----------+
| CAS# | Chemical Name | % | EINECS# |
|----------------|--------------------------------------|----------|-----------|
| 696-63-9 |4-Methoxybenzenethiol, 98% | 98% | 211-799-2 |
+----------------+--------------------------------------+----------+-----------+
Hazard Symbols: XN
Risk Phrases: 22 36/37/38
**** SECTION 3 - HAZARDS IDENTIFICATION ****
EMERGENCY OVERVIEW
Harmful if swallowed. Irritating to eyes, respiratory system and
skin.The toxicological properties of this material have not been
fully investigated.Stench.Air sensitive.
Potential Health Effects
Eye:
Causes eye irritation.
Skin:
Causes skin irritation.
Ingestion:
May cause irritation of the digestive tract. The toxicological
properties of this substance have not been fully investigated.
Inhalation:
Causes respiratory tract irritation. The toxicological properties of
this substance have not been fully investigated.
Chronic:
No information found.
**** SECTION 4 - FIRST AID MEASURES ****
Eyes:
Flush eyes with plenty of water for at least 15 minutes,
occasionally lifting the upper and lower eyelids. Get medical aid
immediately.
Skin:
Get medical aid. Flush skin with plenty of water for at least 15
minutes while removing contaminated clothing and shoes.
Ingestion:
If victim is conscious and alert, give 2-4 cupfuls of milk or water.
Get medical aid immediately.
Inhalation:
Get medical aid immediately. Remove from exposure and move to fresh
air immediately. If not breathing, give artificial respiration. If
breathing is difficult, give oxygen.
Notes to Physician:
**** SECTION 5 - FIRE FIGHTING MEASURES ****
General Information:
As in any fire, wear a self-contained breathing apparatus in
pressure-demand, MSHA/NIOSH (approved or equivalent), and full
protective gear. Will burn if involved in a fire.
Extinguishing Media:
Use water spray, dry chemical, carbon dioxide, or chemical foam.
**** SECTION 6 - ACCIDENTAL RELEASE MEASURES ****
General Information: Use proper personal protective equipment as indicated
in Section 8.
Spills/Leaks:
Absorb spill with inert material (e.g. vermiculite, sand or earth),
then place in suitable container.
**** SECTION 7 - HANDLING and STORAGE ****
Handling:
Wash thoroughly after handling. Avoid contact with skin and eyes.
Avoid ingestion and inhalation. Use only in a chemical fume hood.
Storage:
Keep away from sources of ignition. Store in a cool, dry place.
Store in a tightly closed container.
**** SECTION 8 - EXPOSURE CONTROLS, PERSONAL PROTECTION ****
Engineering Controls:
Facilities storing or utilizing this material should be equipped
with an eyewash facility and a safety shower. Use process enclosure,
local exhaust ventilation, or other engineering controls to control
airborne levels.
Exposure Limits
CAS# 696-63-9:
Personal Protective Equipment
Eyes:
Wear appropriate protective eyeglasses or chemical
safety goggles as described by OSHA's eye and face
protection regulations in 29 CFR 1910.133 or European
Standard EN166.
Skin:
Wear appropriate protective gloves to prevent skin
exposure.
Clothing:
Wear appropriate protective clothing to prevent skin
exposure.
Respirators:
Follow the OSHA respirator regulations found in 29
CFR 1910.134 or European Standard EN 149. Use a
NIOSH/MSHA or European Standard EN 149 approved
respirator if exposure limits are exceeded or if
irritation or other symptoms are experienced.
**** SECTION 9 - PHYSICAL AND CHEMICAL PROPERTIES ****
Physical State: Liquid
Color: clear yellow
Odor: stench
pH: Not available.
Vapor Pressure: Not available.
Viscosity: Not available.
Boiling Point: 228 deg C @ 760.00mm Hg
Freezing/Melting Point: Not available.
Autoignition Temperature: Not available.
Flash Point: 96 deg C ( 204.80 deg F)
Explosion Limits, lower: Not available.
Explosion Limits, upper: Not available.
Decomposition Temperature:
Solubility in water:
Specific Gravity/Density: 1.1400g/cm3
Molecular Formula: C7H8OS
Molecular Weight: 140.20
**** SECTION 10 - STABILITY AND REACTIVITY ****
Chemical Stability:
Stable under normal temperatures and pressures.
Conditions to Avoid:
Exposure to air.
Incompatibilities with Other Materials:
Oxidizing agents, strong bases.
Hazardous Decomposition Products:
Carbon monoxide, oxides of sulfur, carbon dioxide, hydrogen sulfide.
Hazardous Polymerization: Has not been reported.
**** SECTION 11 - TOXICOLOGICAL INFORMATION ****
RTECS#:
CAS# 696-63-9: DC1800000
LD50/LC50:
Not available.
Carcinogenicity:
4-Methoxybenzenethiol, 98% -
Not listed by ACGIH, IARC, or NTP.
Other:
See actual entry in RTECS for complete information.
**** SECTION 12 - ECOLOGICAL INFORMATION ****
**** SECTION 13 - DISPOSAL CONSIDERATIONS ****
Dispose of in a manner consistent with federal, state, and local regulations.
**** SECTION 14 - TRANSPORT INFORMATION ****
IATA
Not regulated as a hazardous material.
IMO
Not regulated as a hazardous material.
RID/ADR
Not regulated as a hazardous material.
**** SECTION 15 - REGULATORY INFORMATION ****
European/International Regulations
European Labeling in Accordance with EC Directives
Hazard Symbols: XN
Risk Phrases:
R 22 Harmful if swallowed.
R 36/37/38 Irritating to eyes, respiratory system
and skin.
Safety Phrases:
S 26 In case of contact with eyes, rinse immediately
with plenty of water and seek medical advice.
S 37/39 Wear suitable gloves and eye/face
protection.
WGK (Water Danger/Protection)
CAS# 696-63-9: No information available.
Canada
None of the chemicals in this product are listed on the DSL/NDSL list.
CAS# 696-63-9 is not listed on Canada's Ingredient Disclosure List.
US FEDERAL
TSCA
CAS# 696-63-9 is not listed on the TSCA inventory.
It is for research and development use only.
**** SECTION 16 - ADDITIONAL INFORMATION ****
MSDS Creation Date: 9/02/1997 Revision #2 Date: 3/18/2003
The information above is believed to be accurate and represents the best
information currently available to us. However, we make no warranty of
merchantability or any other warranty, express or implied, with respect to
such information, and we assume no liability resulting from its use. Users
should make their own investigations to determine the suitability of the
information for their particular purposes. In no way shall the company be
liable for any claims, losses, or damages of any third party or for lost
profits or any special, indirect, incidental, consequential or exemplary
damages, howsoever arising, even if the company has been advised of
the possibility of such damages.
--------------------------------------------------------------------------------
--------------------------------------------------------------------------------
|
|
|
| ALL MSDS PAGES IN THIS GROUP
| | NAME | CAS |
|
3-Methyl-5-Methoxycarbonyl-1-Benzyl-4-Piperidone Hydrochloride, 99%
| 0-01-1 |
|
4-Decanol, 99%
| 2051-31-2 |
|
5-Chloro-1,3-dimethoxybenzene, 97+%
| 7051-16-3 |
|
Bis-(Benzonitrile)-Palladium(II)Chloride, 99+%
| 14220-64-5 |
|
N-(1-Anilinonaphthyl-4)-Maleimide
| 50539-45-2 |
|
4-Chloro-O-Anisic Acid, 99%
| 57479-70-6 |
|
Furfuryl Mercaptan, 97%
| 98-02-2 |
|
4-Methoxybenzenethiol, 98%
| 696-63-9 |
|
6-Dimethylaminopurine
| 938-55-6 |
|
2-Amino-4,6-Dichloropyrimidine, Tech.
| 56-05-3 |
|
2,4-Dihydroxy-n-(2-Hydroxyethyl)benzamide, 99% (TLC)
| 24207-41-8 |
|
Brucine dihydrate, 99%
| 145428-94-0 |
|
2-Indanol, 99%
| 4254-29-9 |
|
Trifluoroacetic Acid, Ammonium Salt, 98%
| 3336-58-1 |
|
10-Methylphenothiazine
| 1207-72-3 |
|
Trimethyl Phosphate, P.A.
| 512-56-1 |
|
4-Bromotoluene, 99%
| 106-38-7 |
|
Ethylenediaminetetraacetic Acid Copper, Disodium Salt Dihydrate, 98%
| 61916-40-3 |
|
3-Methylsalicylic acid, 99%
| 83-40-9 |
|
5-Benzyloxytryptamine hydrochloride, 98%
| 52055-23-9 |
|
3-Formylsalicylic acid, 97%
| 610-04-8 |
|
3-Methylcyclopentanol, 99%, mixture of isomers
| 18729-48-1 |
|
L(-)-Dibenzoyl-L-tartaric acid monohydrate , 98%
| 2743-38-6 |
|
1-Phenoxy-2-propanol,97%
| 770-35-4 |
|
Ethyl 2(2-Aminothiazole-4-yl)-2-Methoxyiminoacetate, 98%
| 64485-88-7 |
|
Borane-tetrahydrofuran complex, 1M solution in tetrahydrofuran
| 109-99-9 |
|
N-Phenyl-P-Phenylenediamine Monohydro-Chloride, 99% (Titr.)
| 2198-59-6 |
|
Dipentaerythritol, 90%
| 126-58-9 |
|
2,4'-Dipyridyl, 97+%
| 581-47-5 |
|
N,N-Bis(2-Cyanoethyl)Formamide
| 3445-84-9 |
|
L-(+)-Lysine Monohydrate 99%
| 39665-12-8 |
|
Albizziin, 98%
| 1483-07-4 |
|
2-Methyltetrahydrofuran-3-one, 98%
| 3188-00-9 |
|
N-Acryloyltris(Hydroxymethyl)aminomethane (Nat)
| 13880-05-2 |
|
Sulforhodamine 101 (Free Acid), Laser Grade, 99% (UV-Vis)
| 82354-19-6 |
|
Progesterone, 98%
| 57-83-0 |
|
5-Bromo-2-Fluorobenzaldehyde, 98%
| 93777-26-5 |
|
5-Amino-3-Methylisothiazole Hydrochloride
| 52547-00-9 |
|
Pentafluoropropionic Anhydride
| 356-42-3 |
|
Albumine bovine serum,additional reagent for igss, protease free
| |
|
D-(+)-Methioninol
| 87206-44-8 |
|
alpha-Chloro-o-xylene, 99%
| 552-45-4 |
|
2-(5-Bromo-2-Pyridylazo)-5- (Diethylamino)Phenol, 99+% (Titr.)
| 14337-53-2 |
|
(S)-(+)-alpha-Methoxy-alpha-trifluoro-methylphenylacetyl chloride,
| 20445-33-4 |
|
(1S,2S,3R,5S)-(+)-2,3-Pinanediol, 98%
| 18680-27-8 |
|
Molecular Sieves, 3A, 8 to 12 Mesh
| 308080-99-1 |
|
1-Methyl-4-piperidone, 98%
| 1445-73-4 |
|
2-Amino-6,7-Dimethyl-4-Hydroxypteridine
| 611-55-2 |
|
Dinonyl Phthalate
| 84-76-4 |
|
Phenyl sulfoxide, 97%
| 945-51-7 |
|
|