**** SECTION 2 - COMPOSITION, INFORMATION ON INGREDIENTS ****
+----------------+--------------------------------------+----------+-----------+
| CAS# | Chemical Name | % | EINECS# |
|----------------|--------------------------------------|----------|-----------|
| 770-35-4 |1-Phenoxy-2-propanol | 97.0 | 212-222-7 |
+----------------+--------------------------------------+----------+-----------+
Hazard Symbols: None Listed.
Risk Phrases: None Listed.
**** SECTION 3 - HAZARDS IDENTIFICATION ****
EMERGENCY OVERVIEW
The toxicological properties of this material have not been fully
investigated.
Potential Health Effects
Eye:
May cause eye irritation.
Skin:
May cause skin irritation.
Ingestion:
May cause irritation of the digestive tract. The toxicological
properties of this substance have not been fully investigated.
Inhalation:
May cause respiratory tract irritation. The toxicological properties
of this substance have not been fully investigated. May be harmful if
inhaled.
Chronic:
No information found.
**** SECTION 4 - FIRST AID MEASURES ****
Eyes:
In case of contact, immediately flush eyes with plenty of water for
at least 15 minutes. Get medical aid.
Skin:
In case of contact, flush skin with plenty of water. Remove
contaminated clothing and shoes. Get medical aid if irritation
develops and persists. Wash clothing before reuse.
Ingestion:
If swallowed, do not induce vomiting unless directed to do so by
medical personnel. Never give anything by mouth to an unconscious
person. Get medical aid.
Inhalation:
If inhaled, remove to fresh air. If not breathing, give artificial
respiration. If breathing is difficult, give oxygen. Get medical aid.
Notes to Physician:
Treat symptomatically and supportively.
**** SECTION 5 - FIRE FIGHTING MEASURES ****
General Information:
As in any fire, wear a self-contained breathing apparatus in
pressure-demand, MSHA/NIOSH (approved or equivalent), and full
protective gear. During a fire, irritating and highly toxic gases
may be generated by thermal decomposition or combustion.
Extinguishing Media:
Use water fog, dry chemical, carbon dioxide, or regular foam.
**** SECTION 6 - ACCIDENTAL RELEASE MEASURES ****
General Information: Use proper personal protective equipment as indicated
in Section 8.
Spills/Leaks:
Absorb spill with inert material (e.g. vermiculite, sand or earth),
then place in suitable container. Avoid runoff into storm sewers and
ditches which lead to waterways. Clean up spills immediately,
observing precautions in the Protective Equipment section. Provide
ventilation.
**** SECTION 7 - HANDLING and STORAGE ****
Handling:
Wash thoroughly after handling. Avoid contact with eyes, skin, and
clothing. Keep container tightly closed. Avoid ingestion and
inhalation. Use with adequate ventilation.
Storage:
Store in a tightly closed container. Store in a cool, dry,
well-ventilated area away from incompatible substances.
**** SECTION 8 - EXPOSURE CONTROLS, PERSONAL PROTECTION ****
Engineering Controls:
Facilities storing or utilizing this material should be equipped
with an eyewash facility and a safety shower. Use adequate
ventilation to keep airborne concentrations low.
Exposure Limits
CAS# 770-35-4:
Personal Protective Equipment
Eyes:
Wear appropriate protective eyeglasses or chemical
safety goggles as described by OSHA's eye and face
protection regulations in 29 CFR 1910.133 or European
Standard EN166.
Skin:
Wear appropriate protective gloves to prevent skin
exposure.
Clothing:
Wear appropriate protective clothing to prevent skin
exposure.
Respirators:
Follow the OSHA respirator regulations found in 29
CFR 1910.134 or European Standard EN 149. Use a
NIOSH/MSHA or European Standard EN 149 approved
respirator if exposure limits are exceeded or if
irritation or other symptoms are experienced.
**** SECTION 9 - PHYSICAL AND CHEMICAL PROPERTIES ****
Physical State: Liquid
Color: colorless to pale yellow
Odor: Not available.
pH: Not available.
Vapor Pressure: 368 hPa @ 20 deg C
Viscosity: Not available.
Boiling Point: 243 deg C @760mmHg
Freezing/Melting Point: Not available.
Autoignition Temperature: Not available.
Flash Point: > 110 deg C (> 230.00 deg F)
Explosion Limits, lower: Not available.
Explosion Limits, upper: Not available.
Decomposition Temperature: > 300 deg C
Solubility in water:
Specific Gravity/Density: 1.0510g/cm3
Molecular Formula: C9H12O2
Molecular Weight: 152.19
**** SECTION 10 - STABILITY AND REACTIVITY ****
Chemical Stability:
Stable under normal temperatures and pressures.
Conditions to Avoid:
Excess heat.
Incompatibilities with Other Materials:
Strong oxidizing agents.
Hazardous Decomposition Products:
Carbon monoxide, carbon dioxide.
Hazardous Polymerization: Will not occur.
**** SECTION 11 - TOXICOLOGICAL INFORMATION ****
RTECS#:
CAS# 770-35-4: UB8886500
LD50/LC50:
CAS# 770-35-4: Oral, rat: LD50 = 2830 mg/kg; Skin, rabbit: LD50 = >2
gm/kg.
Carcinogenicity:
1-Phenoxy-2-propanol -
Not listed by ACGIH, IARC, or NTP.
Other:
See actual entry in RTECS for complete information.
**** SECTION 12 - ECOLOGICAL INFORMATION ****
**** SECTION 13 - DISPOSAL CONSIDERATIONS ****
Dispose of in a manner consistent with federal, state, and local regulations.
**** SECTION 14 - TRANSPORT INFORMATION ****
IATA
Shipping Name: Not regulated.
Hazard Class:
UN Number:
Packing Group:
IMO
Shipping Name: Not regulated.
Hazard Class:
UN Number:
Packing Group:
RID/ADR
Shipping Name: Not regulated.
Hazard Class:
UN Number:
Packing group:
**** SECTION 15 - REGULATORY INFORMATION ****
European/International Regulations
European Labeling in Accordance with EC Directives
Hazard Symbols: Not available.
Risk Phrases:
Safety Phrases:
S 24/25 Avoid contact with skin and eyes.
S 37/39 Wear suitable gloves and eye/face
protection.
WGK (Water Danger/Protection)
CAS# 770-35-4: 2
Canada
CAS# 770-35-4 is listed on Canada's DSL List.
CAS# 770-35-4 is not listed on Canada's Ingredient Disclosure List.
US FEDERAL
TSCA
CAS# 770-35-4 is listed on the TSCA inventory.
**** SECTION 16 - ADDITIONAL INFORMATION ****
MSDS Creation Date: 9/02/1997 Revision #4 Date: 8/04/2004
The information above is believed to be accurate and represents the best
information currently available to us. However, we make no warranty of
merchantability or any other warranty, express or implied, with respect to
such information, and we assume no liability resulting from its use. Users
should make their own investigations to determine the suitability of the
information for their particular purposes. In no way shall the company be
liable for any claims, losses, or damages of any third party or for lost
profits or any special, indirect, incidental, consequential or exemplary
damages, howsoever arising, even if the company has been advised of
the possibility of such damages.
--------------------------------------------------------------------------------
--------------------------------------------------------------------------------
|
|
|
| ALL MSDS PAGES IN THIS GROUP
| | NAME | CAS |
|
3-Methyl-5-Methoxycarbonyl-1-Benzyl-4-Piperidone Hydrochloride, 99%
| 0-01-1 |
|
4-Decanol, 99%
| 2051-31-2 |
|
5-Chloro-1,3-dimethoxybenzene, 97+%
| 7051-16-3 |
|
Bis-(Benzonitrile)-Palladium(II)Chloride, 99+%
| 14220-64-5 |
|
N-(1-Anilinonaphthyl-4)-Maleimide
| 50539-45-2 |
|
4-Chloro-O-Anisic Acid, 99%
| 57479-70-6 |
|
Furfuryl Mercaptan, 97%
| 98-02-2 |
|
4-Methoxybenzenethiol, 98%
| 696-63-9 |
|
6-Dimethylaminopurine
| 938-55-6 |
|
2-Amino-4,6-Dichloropyrimidine, Tech.
| 56-05-3 |
|
2,4-Dihydroxy-n-(2-Hydroxyethyl)benzamide, 99% (TLC)
| 24207-41-8 |
|
Brucine dihydrate, 99%
| 145428-94-0 |
|
2-Indanol, 99%
| 4254-29-9 |
|
Trifluoroacetic Acid, Ammonium Salt, 98%
| 3336-58-1 |
|
10-Methylphenothiazine
| 1207-72-3 |
|
Trimethyl Phosphate, P.A.
| 512-56-1 |
|
4-Bromotoluene, 99%
| 106-38-7 |
|
Ethylenediaminetetraacetic Acid Copper, Disodium Salt Dihydrate, 98%
| 61916-40-3 |
|
3-Methylsalicylic acid, 99%
| 83-40-9 |
|
5-Benzyloxytryptamine hydrochloride, 98%
| 52055-23-9 |
|
3-Formylsalicylic acid, 97%
| 610-04-8 |
|
3-Methylcyclopentanol, 99%, mixture of isomers
| 18729-48-1 |
|
L(-)-Dibenzoyl-L-tartaric acid monohydrate , 98%
| 2743-38-6 |
|
1-Phenoxy-2-propanol,97%
| 770-35-4 |
|
Ethyl 2(2-Aminothiazole-4-yl)-2-Methoxyiminoacetate, 98%
| 64485-88-7 |
|
Borane-tetrahydrofuran complex, 1M solution in tetrahydrofuran
| 109-99-9 |
|
N-Phenyl-P-Phenylenediamine Monohydro-Chloride, 99% (Titr.)
| 2198-59-6 |
|
Dipentaerythritol, 90%
| 126-58-9 |
|
2,4'-Dipyridyl, 97+%
| 581-47-5 |
|
N,N-Bis(2-Cyanoethyl)Formamide
| 3445-84-9 |
|
L-(+)-Lysine Monohydrate 99%
| 39665-12-8 |
|
Albizziin, 98%
| 1483-07-4 |
|
2-Methyltetrahydrofuran-3-one, 98%
| 3188-00-9 |
|
N-Acryloyltris(Hydroxymethyl)aminomethane (Nat)
| 13880-05-2 |
|
Sulforhodamine 101 (Free Acid), Laser Grade, 99% (UV-Vis)
| 82354-19-6 |
|
Progesterone, 98%
| 57-83-0 |
|
5-Bromo-2-Fluorobenzaldehyde, 98%
| 93777-26-5 |
|
5-Amino-3-Methylisothiazole Hydrochloride
| 52547-00-9 |
|
Pentafluoropropionic Anhydride
| 356-42-3 |
|
Albumine bovine serum,additional reagent for igss, protease free
| |
|
D-(+)-Methioninol
| 87206-44-8 |
|
alpha-Chloro-o-xylene, 99%
| 552-45-4 |
|
2-(5-Bromo-2-Pyridylazo)-5- (Diethylamino)Phenol, 99+% (Titr.)
| 14337-53-2 |
|
(S)-(+)-alpha-Methoxy-alpha-trifluoro-methylphenylacetyl chloride,
| 20445-33-4 |
|
(1S,2S,3R,5S)-(+)-2,3-Pinanediol, 98%
| 18680-27-8 |
|
Molecular Sieves, 3A, 8 to 12 Mesh
| 308080-99-1 |
|
1-Methyl-4-piperidone, 98%
| 1445-73-4 |
|
2-Amino-6,7-Dimethyl-4-Hydroxypteridine
| 611-55-2 |
|
Dinonyl Phthalate
| 84-76-4 |
|
Phenyl sulfoxide, 97%
| 945-51-7 |
|
|